Structure and Mechanical Properties of the Molybdenum–Steel Bimetal Fabricated by Hot Isostatic Pressing

被引：0
|
作者：
D. N. Makhina
V. N. Denisov
Yu. S. Perminova
V. N. Butrim
S. A. Nikulin
机构：
[1] JSC Kompozit,
[2] National University of Science and Technology MISiS,undefined
来源：
Russian Metallurgy (Metally) | 2019年 / 2019卷
关键词：
: bimetal; molybdenum alloy–corrosion-resistant steel welded joint; intermediate layers; diffusion welding; hot isostatic pressing; structure; strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Abstract—The structure and the ultimate tensile strength of the bimetallic joints of a TsM2A (Mo–Ti–Zr system) molybdenum alloy and a corrosion-resistant 12Kh18N10T steel are studied. These joints are formed by diffusion welding under hot isostatic pressing conditions using the following combined intermediate layers: vanadium–electrical sheet steel, vanadium–copper, and titanium–niobium–copper. The highest strength of the joint (419 MPa) is reached when a combination intermediate layer of titanium, niobium, and copper is used.
引用
收藏
页码：1031 / 1035
页数：4
相关论文
共 50 条
  • [21] Effect of hot isostatic pressing on the microstructure and mechanical properties of vitreous enamel coatings on low carbon steel
    Kim, M. T.
    Chang, S. Y.
    Won, J. B.
    Park, H. W.
    SURFACE & COATINGS TECHNOLOGY, 2006, 201 (06): : 3281 - 3288
  • [22] Effect of hot isostatic pressing on the mechanical properties of aluminum oxide ceramics
    Barinov, SM
    Ponomarev, VF
    Shevchenko, VY
    REFRACTORIES AND INDUSTRIAL CERAMICS, 1997, 38 (1-2) : 9 - 12
  • [23] Mechanical properties of electroconductive ceramic composites produced by hot isostatic pressing
    Klein, R
    Desmaison-Brut, M
    Medri, V
    Feldhoff, A
    Desmaison, J
    EURO CERAMICS VIII, PTS 1-3, 2004, 264-268 : 881 - 884
  • [24] Hot isostatic pressing of bulk magnesium diboride: mechanical and superconducting properties
    Indrakanti, SS
    Nesterenko, VF
    Maple, MB
    Frederick, NA
    Yuhasz, WH
    Li, S
    PHILOSOPHICAL MAGAZINE LETTERS, 2001, 81 (12) : 849 - 857
  • [25] Effect of hot isostatic pressing on the mechanical properties of aluminum oxide ceramics
    S. M. Barinov
    V. F. Ponomarev
    V. Ya. Shevchenko
    Refractories and Industrial Ceramics, 1997, 38 : 9 - 12
  • [26] Mechanical Properties of Submicrometer-Grained Transparent Yttria Ceramics by Hot Pressing with Hot-Isostatic Pressing
    Gan, Lin
    Park, Young-Jo
    Kim, Haneul
    Kim, Jin-Myung
    Ko, Jae-Woong
    Lee, Jae-Wook
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2016, 13 (04) : 678 - 684
  • [27] Microstructure and mechanical properties of Mg/Mg bimetal composites fabricated by hot-pressing diffusion and co-extrusion
    Zhao, K. N.
    Xu, D. X.
    Li, H. X.
    Zhang, J. S.
    Chen, D. L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 764
  • [28] Effects of Hot Isostatic Pressing on the Microstructure and Mechanical Properties of K418 Alloys Fabricated by Selective Laser Melting
    Zhang, Xiaoxuan
    Li, Rengeng
    Ma, Yi
    Wu, Hao
    Fan, Guohua
    JOM, 2024, 76 (11) : 6240 - 6251
  • [29] Effect of heat treatment on the microstructure and mechanical properties of SiCf/Ti55531 composite fabricated by hot isostatic pressing
    Li, Guanliang
    Jiang, Xueqi
    Jia, Qiuyue
    Zhang, Yuming
    Li, Mushi
    Yang, Lina
    Gao, Ximan
    Wang, Yifan
    Wang, Yumin
    Yang, Rui
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1016
  • [30] Effect of hot isostatic pressing on the mechanical and corrosive properties of Ti-Ni alloy fabricated by selective laser melting
    Ren, Dechun
    Zhang, Lianmin
    Liu, Yujing
    Ji, Haibin
    Li, Shujun
    Jin, Wei
    Lei, Jiafeng
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 4595 - 4605
12345