Analytical Modeling of Shear Band Spacing of Serrated Chip in High Speed Cutting of Aluminum Alloys

被引：1
|
作者：
Jiang, Xudong [1 ]
Wang, Yiqiang [1 ]
机构：
[1] Jilin Univ, Mech Sci & Engn Coll, Changchun, Peoples R China
来源：
E-ENGINEERING & DIGITAL ENTERPRISE TECHNOLOGY VII, PTS 1 AND 2 | 2009年 / 16-19卷
关键词：
Shear band spacing; Analytical modeling; Serrated chip; High speed cutting; FLOW; ZONE;
D O I：
10.4028/www.scientific.net/AMM.16-19.612
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Based on Oxley s predictive model, the novel analytical modeling of shear band spacing of serrated chip in high speed cutting of aluminum alloys is investigated accounting for the effect of strain rate hardening in addition to temperature softening. It is indicated that the shear band spacing decreases with increasing the cutting velocity and increases with increasing undeformed chip thickness. Other than the cutting velocity and undeformed chip thickness, the shear band spacing initially descends to minimum and subsequently ascends with increasing the tool rake angle.
引用
收藏
页码：612 / 617
页数：6
相关论文
共 50 条
  • [31] Mechanism of material softening in primary shear zone during serrated chip formation in high speed machining of high strength steel
    Duan, Chunzheng
    Wang, Minjie
    Cai, Yujun
    Key Engineering Materials, 2009, 407-408 : 504 - 508
  • [32] Component Analysis of Adiabatic Shear Band Formed in High Speed Cutting of High Strength Alloy Steel
    Duan, C. Z.
    Wang, Z. X.
    Wang, M. J.
    Kong, W. S.
    ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 1482 - 1485
  • [33] Influence of the cutting speed on chip formation in turning high-temperature chromium and nickel alloys
    Adaskin A.M.
    Butrim V.N.
    Vereshchaka A.A.
    Vereshchaka A.S.
    Kashirtsev V.V.
    Russian Engineering Research, 2015, 35 (04) : 298 - 301
  • [34] An accurate transient model for temperature fluctuation on localized shear band in serrated chip formation
    Chen, Xuelin
    Tang, Jinyuan
    Ding, Han
    Liu, Anmin
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2021, 204
  • [35] MODELING SHEAR PERFORMANCE OF HIGH-SPEED RIDGED NAIL IN ALUMINUM JOINTS
    Siripurapu, Sundeep Krishna
    Luscher, Anthony F.
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2017, VOL 2B, 2017,
  • [36] On adiabatic shear localized fracture during serrated chip evolution in high speed machining of hardened AISI 1045 steel
    Gu Liyao
    Wang Minjie
    Duan Chunzheng
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2013, 75 : 288 - 298
  • [37] Study on the forming mechamism of serrated chip in high speed turning for steel
    Ye, BY
    Xu, J
    Wu, WJ
    Zhao, XZ
    Liu, XC
    PROGRESS OF MACHINING TECHNOLOGY, 2004, : 819 - 822
  • [38] Formation mechanism and characterization of shear band in high-speed cutting Inconel718
    Hao, ZhaoPeng
    Cui, RuiRui
    Fan, YiHang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 98 (9-12): : 2791 - 2799
  • [39] Formation mechanism and characterization of shear band in high-speed cutting Inconel718
    ZhaoPeng Hao
    RuiRui Cui
    YiHang Fan
    The International Journal of Advanced Manufacturing Technology, 2018, 98 : 2791 - 2799
  • [40] Behaviour of Cu-Zn alloys in high speed shear tests and in chip formation processes
    Hofmann, U
    El-Magd, E
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 395 (1-2): : 129 - 140
12345