Manufacturability of overhang structure using open source 3D printer

被引：0
|
作者：
Alkahari, M. R. [1 ,2 ]
Mazlan, S. N. H. [1 ]
Sun, O. I. [3 ]
Ramli, F. R. [1 ,2 ]
Maidin, N. A. [4 ]
Sudin, M. N. [1 ,2 ]
机构：
[1] Univ Tekn Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Tekn Malaysia Melaka, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia
[3] Daikin Res & Dev Malaysia Sdn Bhd, Taman Perind Bukit Rahman Putra, Sungai Buloh 47000, Selangor, Malaysia
[4] Univ Tekn Malaysia Melaka, Fac Engn Technol, Durian Tunggal 76100, Melaka, Malaysia
来源：
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2017 (MERD) | 2017年
关键词：
Fused deposition modeling (FDM); overhang structure; additive manufacturing; BENCHMARKING;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Fused Deposition Modeling (FDM) is the most common 3D process where parts are created layer by layer. Recently, researchers started to study on the different structure that FDM cannot fabricate such as overhang structure. The objective of this paper is to investigate the manufacturability of the overhang structure at various lengths. The overhang structure is designed and built using the open source 3D printer. Then, the capability of the structure to be produced according to its design is evaluated. Based on this, some recommendation is presented to provide a guideline to the 3D printer user.
引用
收藏
页码：158 / 159
页数：2
相关论文
共 50 条
  • [1] Design for Manufacturability (DFM) of 3D Printed Parts Fabricated Using Open Source 3D Printer
    Maidin, N. A.
    Rahman, M. H. A.
    Ahmad, M. N.
    Salahuddin, M. B. M.
    Mazlan, S. N. H.
    Wahid, M. K.
    Osman, M. H.
    Jumaidin, R.
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2020, 12 (05): : 203 - 209
  • [2] Slicer Method Comparison Using Open-source 3D Printer
    Ariffin, M. K. A. Mohd
    Sukindar, N. A.
    Baharudin, B. T. H. T.
    Jaafar, C. N. A.
    Ismail, M. I. S.
    2017 INTERNATIONAL CONFERENCE ON POWER AND ENERGY ENGINEERING, 2018, 114
  • [3] MAKING A 3D PRINTER OF DELTA CONFIGURATION USING OPEN-SOURCE PROJECT
    Aleksandrovic, Miroslav
    Kovacevic, Nada Ratkovic
    Kreculj, Dragan
    Dihovicni, Dorde
    Jakovljevic, Petar
    STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2022, 22 (01): : 125 - 130
  • [4] Impact strength of 3D printed PLA using open source FFF-based 3D printer
    Rajpurohit, Shilpesh R.
    Dave, Harshit K.
    PROGRESS IN ADDITIVE MANUFACTURING, 2021, 6 (01) : 119 - 131
  • [5] Impact strength of 3D printed PLA using open source FFF-based 3D printer
    Shilpesh R. Rajpurohit
    Harshit K. Dave
    Progress in Additive Manufacturing, 2021, 6 : 119 - 131
  • [6] Optimization of warping deformation in open source 3d printer using response surface method
    Nazan, M. A.
    Ramli, F. R.
    Alkahari, M. R.
    Sudin, M. N.
    Abdullah, M. A.
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2016, 2016, : 71 - 72
  • [7] Optimizing Setting of Open Source Fused Deposition Modeling 3D Printer
    Poljak, Silvester
    Bast'ovansky, Ronald
    Podhora, Pavol
    CURRENT METHODS OF CONSTRUCTION DESIGN, 2020, : 489 - 499
  • [8] Identifying 3D printer residual data via open-source documentation
    Miller, Daniel Bradford
    Glisson, William Bradley
    Yampolskiy, Mark
    Choo, Kim-Kwang Raymond
    COMPUTERS & SECURITY, 2018, 75 : 10 - 23
  • [9] Evaluating the deposition quality of parts produced by an open-source 3D printer
    Santana, Leonardo
    Ahrens, Carlos Henrique
    Sabino Netto, Aurelio da Costa
    Bonin, Cassiano
    RAPID PROTOTYPING JOURNAL, 2017, 23 (04) : 796 - 803
  • [10] Design, testing, and application of an open-source powder material extrusion 3D printer
    Miao, Xinyu
    Chin, Kyle C.H.
    Boydston, Andrew J.
    Additive Manufacturing, 2024, 81
12345