Manufacturability of overhang structure using open source 3D printer

被引：0
|
作者：
Alkahari, M. R. [1 ,2 ]
Mazlan, S. N. H. [1 ]
Sun, O. I. [3 ]
Ramli, F. R. [1 ,2 ]
Maidin, N. A. [4 ]
Sudin, M. N. [1 ,2 ]
机构：
[1] Univ Tekn Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Tekn Malaysia Melaka, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia
[3] Daikin Res & Dev Malaysia Sdn Bhd, Taman Perind Bukit Rahman Putra, Sungai Buloh 47000, Selangor, Malaysia
[4] Univ Tekn Malaysia Melaka, Fac Engn Technol, Durian Tunggal 76100, Melaka, Malaysia
来源：
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2017 (MERD) | 2017年
关键词：
Fused deposition modeling (FDM); overhang structure; additive manufacturing; BENCHMARKING;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Fused Deposition Modeling (FDM) is the most common 3D process where parts are created layer by layer. Recently, researchers started to study on the different structure that FDM cannot fabricate such as overhang structure. The objective of this paper is to investigate the manufacturability of the overhang structure at various lengths. The overhang structure is designed and built using the open source 3D printer. Then, the capability of the structure to be produced according to its design is evaluated. Based on this, some recommendation is presented to provide a guideline to the 3D printer user.
引用
收藏
页码：158 / 159
页数：2
相关论文
共 50 条
  • [21] Influence of ABS print parameters on a 3D open-source, self-replicable printer
    Alves Guimaraes, Andre Luiz
    Gerlin Neto, Vicente
    Foschini, Cesar Renato
    dos Anjos Azambuja, Maximiliano
    Hellmeister, Luiz Antonio Vasques
    RAPID PROTOTYPING JOURNAL, 2020, 26 (10) : 1733 - 1738
  • [22] 3D printer waste, a new source of nanoplastic pollutants
    Rodriguez-Hernandez, A. G.
    Chiodoni, Angelica
    Bocchini, Sergio
    Vazquez-Duhalt, Rafael
    ENVIRONMENTAL POLLUTION, 2020, 267
  • [23] Structure and properties of mortar printed on a 3D printer
    Mukhametrakhimov, R. Kh
    Lukmanova, L., V
    MAGAZINE OF CIVIL ENGINEERING, 2021, 102 (02):
  • [24] Recent Patents on Mechanical Structure of 3D Printer
    Xie B.
    Liu S.
    Gao H.
    Zhang T.
    Recent Patents on Engineering, 2022, 16 (06) : 24 - 37
  • [25] Making 3D Replicas Using a Flatbed Scanner and a 3D Printer
    Skala, Vaclav
    Pan, Rongjiang
    Nedved, Ondrej
    COMPUTATIONAL SCIENCE AND ITS APPLICATIONS, PART VI - ICCSA 2014, 2014, 8584 : 76 - 86
  • [26] Relation Between Mechanical Properties and 3D Printer Configurations Parameters Using PLA at Open-Source Prusa I3
    Sierra, J.
    Sanin, D.
    Montoya, A.
    Villaneda, W.
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2020, 12 (08): : 97 - 108
  • [27] Flexural strength of fused filament fabricated (FFF) PLA parts on an open-source 3D printer
    Rajpurohit, Shilpesh R.
    Dave, Harshit K.
    ADVANCES IN MANUFACTURING, 2018, 6 (04) : 430 - 441
  • [28] On the manufacturability of scaffold mould using a 3D printing technology
    Liu, C. Z.
    Sachlos, E.
    Wahl, D. A.
    Han, Z. W.
    Czernuszka, J. T.
    RAPID PROTOTYPING JOURNAL, 2007, 13 (03) : 163 - 174
  • [29] Dimensional accuracy improvement of part fabricated by low cost 3D open source printer for industrial application
    Dixit, Nitesh Kumar
    Srivastava, Rajeev
    Narain, Rakesh
    PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON INTELLIGENT SYSTEMS AND CONTROL (ISCO'16), 2016,
  • [30] Development of low-cost open source 3D gel printer "RepRap SWIM-ER"
    Sato, Kei
    Basher, Samiul
    Ota, Takafumi
    Tase, Taishi
    Takamatsu, Kyuichiro
    Saito, Azusa
    Khosla, Ajit
    Kawakami, Masaru
    Furukawa, Hidemitsu
    NANOSENSORS, BIOSENSORS, INFO-TECH SENSORS AND 3D SYSTEMS 2017, 2017, 10167
12345