Manufacturability of overhang structure using open source 3D printer

被引：0

作者：

Alkahari, M. R. ^{[1
,2
]}

Mazlan, S. N. H. ^{[1
]}

Sun, O. I. ^{[3
]}

Ramli, F. R. ^{[1
,2
]}

Maidin, N. A. ^{[4
]}

Sudin, M. N. ^{[1
,2
]}

机构：

[1] Univ Tekn Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia

[2] Univ Tekn Malaysia Melaka, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia

[3] Daikin Res & Dev Malaysia Sdn Bhd, Taman Perind Bukit Rahman Putra, Sungai Buloh 47000, Selangor, Malaysia

[4] Univ Tekn Malaysia Melaka, Fac Engn Technol, Durian Tunggal 76100, Melaka, Malaysia

来源：

PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2017 (MERD) | 2017年

关键词：

Fused deposition modeling (FDM); overhang structure; additive manufacturing; BENCHMARKING;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Fused Deposition Modeling (FDM) is the most common 3D process where parts are created layer by layer. Recently, researchers started to study on the different structure that FDM cannot fabricate such as overhang structure. The objective of this paper is to investigate the manufacturability of the overhang structure at various lengths. The overhang structure is designed and built using the open source 3D printer. Then, the capability of the structure to be produced according to its design is evaluated. Based on this, some recommendation is presented to provide a guideline to the 3D printer user.

引用

页码：158 / 159

页数：2

共 50 条

[41] 3D printer in action
Keramische Zeitschrift, 2021, 73 (06) : 19 - 21
[42] Food 3D printer
Takemasa, Makoto
JOURNAL OF THE JAPANESE SOCIETY FOR FOOD SCIENCE AND TECHNOLOGY-NIPPON SHOKUHIN KAGAKU KOGAKU KAISHI, 2019, 66 (05): : 186 - 186
[43] UNCONVENTIONAL 3D PRINTER
Kosa, P.
Palkova, Z.
ICERI2016: 9TH INTERNATIONAL CONFERENCE OF EDUCATION, RESEARCH AND INNOVATION, 2016, : 7650 - 7658
[44] 3D GIS DATA MODEL USING OPEN SOURCE SOFTWARE
Scianna, A.
Ammoscato, A.
CORE SPATIAL DATABASES - UPDATING, MAINTENANCE AND SERVICES - FROM THEORY TO PRACTICE, 2010, 38-4-8 (2W): : 120 - 125
[45] 3D gel printer
Gong, Jin, 1600, Society of Polymer Science (63):
[46] Evaluation of 3D Printer Accuracy in Producing Fractal Structure
Kikegawa, Kana
Takamatsu, Kyuuichirou
Kawakami, Masaru
Furukawa, Hidemitsu
Mayama, Hiroyuki
Nonomura, Yoshimune
JOURNAL OF OLEO SCIENCE, 2017, 66 (04) : 383 - 389
[47] WEAR REDUCTION WITH INNER STRUCTURE MADE BY 3D PRINTER
Murashima, Motoyuki
Kawaguchi, Masato
Tanaka, Masaya
Umehara, Noritsugu
Nemoto, Kouki
Okuno, Kiichi
PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017), 2017, : 1381 - 1384
[48] Print server with web user interface for real-time image control and monitoring of a 3D printer using open source tools
Sanchez G, Andres G.
Vaca A, Robert
Manzano, Santiago
Guachimboza, Marco V.
Sanchez Guerrero, Javier
Gomez A, Hector F.
Noriega, Veronica
2017 12TH IBERIAN CONFERENCE ON INFORMATION SYSTEMS AND TECHNOLOGIES (CISTI), 2017,
[49] Patient-Specific 3D Printed Models of Renal Tumours Using Home-Made 3D Printer in Comparison with Commercial 3D Printer
Liu, Dongting
Sun, Zhonghua
Chaichana, Thanapong
Ducke, Werner
Fan, Zhanming
JOURNAL OF MEDICAL IMAGING AND HEALTH INFORMATICS, 2018, 8 (02) : 303 - 308
[50] Developing Low Cost and Smart Laser-based Paper Cutter based on Open Source 3D Printer
Hsieh, Cheng-Tiao
PROCEEDINGS OF THE 2018 IEEE INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING (IEEE ICAM), 2018, : 109 - 112

← 1 2 3 4 5 →