Design for Manufacturability (DFM) of 3D Printed Parts Fabricated Using Open Source 3D Printer

被引：3
|
作者：
Maidin, N. A. [1 ]
Rahman, M. H. A. [1 ]
Ahmad, M. N. [1 ]
Salahuddin, M. B. M. [3 ]
Mazlan, S. N. H. [2 ]
Wahid, M. K. [1 ]
Osman, M. H. [1 ]
Jumaidin, R. [1 ]
机构：
[1] Univ Teknikal Malaysia Melaka, Fac Engn Technol, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Teknikal Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia
[3] Univ Putra Malaysia, Fac Engn, Serdang 43400, Selangor, Malaysia
来源：
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING | 2020年 / 12卷 / 05期
关键词：
Fused Deposition Modeling (FDM); 3D Laser Scanner and Dimensional Accuracy;
D O I：
10.30880/ijie.2020.12.05.025
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fused deposition modeling (FDM) is one of the well-known additive manufacturing (AM) techniques to fabricate the part using layer-by-layer concept. Recently, an open source 3D printer is become widely available used by 3D printer user because of its affordability and portability. In this study, the performance of an open source 3D printer was evaluated based on the dimensional accuracy of the printed parts. The test model was fabricated using two types of printer, which is low cost 3D printer, Prusa and mid-end 3D printer, Cubepro. Then, the dimension of every model structure was measured using Rexscan 3D laser scanner and was compared.
引用
收藏
页码：203 / 209
页数：7
相关论文
共 50 条
  • [1] Manufacturability of overhang structure using open source 3D printer
    Alkahari, M. R.
    Mazlan, S. N. H.
    Sun, O. I.
    Ramli, F. R.
    Maidin, N. A.
    Sudin, M. N.
    [J]. PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2017 (MERD), 2017, : 158 - 159
  • [2] Impact strength of 3D printed PLA using open source FFF-based 3D printer
    Rajpurohit, Shilpesh R.
    Dave, Harshit K.
    [J]. PROGRESS IN ADDITIVE MANUFACTURING, 2021, 6 (01) : 119 - 131
  • [3] Impact strength of 3D printed PLA using open source FFF-based 3D printer
    Shilpesh R. Rajpurohit
    Harshit K. Dave
    [J]. Progress in Additive Manufacturing, 2021, 6 : 119 - 131
  • [4] THE EFFECT OF LAYER THICKNESS ON REPEATABILITY OF 3D PRINTED PLA PARTS PRODUCED USING OPENWARE 3D PRINTER
    Maideen, Normariah Che
    Rahim, Mohd Ikmal Hisham Abdul
    Budin, Salina
    Hyie, Mei
    Yusoff, Hamid
    [J]. IIUM ENGINEERING JOURNAL, 2022, 23 (02): : 218 - 227
  • [5] Flexural strength of fused filament fabricated (FFF) PLA parts on an open-source 3D printer
    Rajpurohit, Shilpesh R.
    Dave, Harshit K.
    [J]. ADVANCES IN MANUFACTURING, 2018, 6 (04) : 430 - 441
  • [6] Flexural strength of fused filament fabricated (FFF) PLA parts on an open-source 3D printer
    Shilpesh R. Rajpurohit
    Harshit K. Dave
    [J]. Advances in Manufacturing, 2018, 6 : 430 - 441
  • [7] Evaluating the deposition quality of parts produced by an open-source 3D printer
    Santana, Leonardo
    Ahrens, Carlos Henrique
    Sabino Netto, Aurelio da Costa
    Bonin, Cassiano
    [J]. RAPID PROTOTYPING JOURNAL, 2017, 23 (04) : 796 - 803
  • [8] Slicer Method Comparison Using Open-source 3D Printer
    Ariffin, M. K. A. Mohd
    Sukindar, N. A.
    Baharudin, B. T. H. T.
    Jaafar, C. N. A.
    Ismail, M. I. S.
    [J]. 2017 INTERNATIONAL CONFERENCE ON POWER AND ENERGY ENGINEERING, 2018, 114
  • [9] An open source toolkit for 3D printed fluidics
    Adam J. N. Price
    Andrew J. Capel
    Robert J. Lee
    Patrick Pradel
    Steven D. R. Christie
    [J]. Journal of Flow Chemistry, 2021, 11 : 37 - 51
  • [10] An open source toolkit for 3D printed fluidics
    Price, Adam J. N.
    Capel, Andrew J.
    Lee, Robert J.
    Pradel, Patrick
    Christie, Steven D. R.
    [J]. JOURNAL OF FLOW CHEMISTRY, 2021, 11 (01) : 37 - 51
12345