Design for Manufacturability (DFM) of 3D Printed Parts Fabricated Using Open Source 3D Printer

被引：3
|
作者：
Maidin, N. A. [1 ]
Rahman, M. H. A. [1 ]
Ahmad, M. N. [1 ]
Salahuddin, M. B. M. [3 ]
Mazlan, S. N. H. [2 ]
Wahid, M. K. [1 ]
Osman, M. H. [1 ]
Jumaidin, R. [1 ]
机构：
[1] Univ Teknikal Malaysia Melaka, Fac Engn Technol, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Teknikal Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia
[3] Univ Putra Malaysia, Fac Engn, Serdang 43400, Selangor, Malaysia
来源：
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING | 2020年 / 12卷 / 05期
关键词：
Fused Deposition Modeling (FDM); 3D Laser Scanner and Dimensional Accuracy;
D O I：
10.30880/ijie.2020.12.05.025
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fused deposition modeling (FDM) is one of the well-known additive manufacturing (AM) techniques to fabricate the part using layer-by-layer concept. Recently, an open source 3D printer is become widely available used by 3D printer user because of its affordability and portability. In this study, the performance of an open source 3D printer was evaluated based on the dimensional accuracy of the printed parts. The test model was fabricated using two types of printer, which is low cost 3D printer, Prusa and mid-end 3D printer, Cubepro. Then, the dimension of every model structure was measured using Rexscan 3D laser scanner and was compared.
引用
收藏
页码：203 / 209
页数：7
相关论文
共 50 条
  • [31] A 3D Printer Design and Fabrication for Chocolate
    Hosseini, Sahar
    Dehghani, Mohammad
    Zarafshan, Payam
    Azarikia, Fatemeh
    [J]. 2022 10TH RSI INTERNATIONAL CONFERENCE ON ROBOTICS AND MECHATRONICS (ICROM), 2022, : 453 - 458
  • [32] Design and Characterization of 3D Printed, Open-Source Actuators for Legged Locomotion
    Urs, Karthik
    Adu, Challen Enninful
    Rouse, Elliott J.
    Moore, Talia Y.
    [J]. 2022 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS), 2022, : 1957 - 1964
  • [33] Design of an In-Space 3D Printer
    McGuire, Thomas
    Hirsch, Michael
    Parsons, Michael
    Leake, Skye
    Straub, Jeremy
    [J]. SENSORS AND SYSTEMS FOR SPACE APPLICATIONS IX, 2016, 9838
  • [34] Design and Implementation of Chocolate 3D Printer
    Xie, Yi
    Tan, Yuegang
    Ma, Guofeng
    Zhang, Jun
    Zhang, Fan
    [J]. 2016 6TH INTERNATIONAL CONFERENCE ON INFORMATION TECHNOLOGY FOR MANUFACTURING SYSTEMS (ITMS 2016), 2016, : 31 - 34
  • [35] Design and fabrication of soft gripper using 3D printer
    Vamsi, P. Bharath
    Rao, V. Ragavendra
    [J]. 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2018), 2018, 402
  • [36] Improving Geometric Accuracy of 3D Printed Parts Using 3D Metrology Feedback and Mesh Morphing
    Jadayel, Moustapha
    Khameneifar, Farbod
    [J]. JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2020, 4 (04):
  • [37] Koala 3D: A continuous climbing 3D printer
    Velez, Maximiliano
    Toala, Efren
    Cristobal Zagal, Juan
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2020, 64
  • [38] Dimensional accuracy improvement of part fabricated by low cost 3D open source printer for industrial application
    Dixit, Nitesh Kumar
    Srivastava, Rajeev
    Narain, Rakesh
    [J]. PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON INTELLIGENT SYSTEMS AND CONTROL (ISCO'16), 2016,
  • [39] Optimizing Setting of Open Source Fused Deposition Modeling 3D Printer
    Poljak, Silvester
    Bast'ovansky, Ronald
    Podhora, Pavol
    [J]. CURRENT METHODS OF CONSTRUCTION DESIGN, 2020, : 489 - 499
  • [40] Optimization of warping deformation in open source 3d printer using response surface method
    Nazan, M. A.
    Ramli, F. R.
    Alkahari, M. R.
    Sudin, M. N.
    Abdullah, M. A.
    [J]. PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2016, 2016, : 71 - 72
12345