Design for Manufacturability (DFM) of 3D Printed Parts Fabricated Using Open Source 3D Printer

被引：3

作者：

Maidin, N. A. ^{[1
]}

Rahman, M. H. A. ^{[1
]}

Ahmad, M. N. ^{[1
]}

Salahuddin, M. B. M. ^{[3
]}

Mazlan, S. N. H. ^{[2
]}

Wahid, M. K. ^{[1
]}

Osman, M. H. ^{[1
]}

Jumaidin, R. ^{[1
]}

机构：

[1] Univ Teknikal Malaysia Melaka, Fac Engn Technol, Durian Tunggal 76100, Melaka, Malaysia

[2] Univ Teknikal Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia

[3] Univ Putra Malaysia, Fac Engn, Serdang 43400, Selangor, Malaysia

来源：

INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING | 2020年 / 12卷 / 05期

关键词：

Fused Deposition Modeling (FDM); 3D Laser Scanner and Dimensional Accuracy;

D O I：

10.30880/ijie.2020.12.05.025

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Fused deposition modeling (FDM) is one of the well-known additive manufacturing (AM) techniques to fabricate the part using layer-by-layer concept. Recently, an open source 3D printer is become widely available used by 3D printer user because of its affordability and portability. In this study, the performance of an open source 3D printer was evaluated based on the dimensional accuracy of the printed parts. The test model was fabricated using two types of printer, which is low cost 3D printer, Prusa and mid-end 3D printer, Cubepro. Then, the dimension of every model structure was measured using Rexscan 3D laser scanner and was compared.

引用

页码：203 / 209

页数：7

共 50 条

[21] 3D printer parts at injection molding level
[J]. JOT, Journal fuer Oberflaechentechnik, 2021, 61 (11): : 54 - 55
[22] 3D printed zeolite monoliths as open-source spare parts for oxygen concentrators
Coro, Florinda
Di Pietro, Licia
Micalizzi, Simone
Bertei, Antonio
Gallone, Giuseppe
Galletti, Anna Maria Raspolli
Ahluwalia, Arti
De Maria, Carmelo
[J]. CHEMICAL ENGINEERING SCIENCE, 2024, 285
[23] Structure and properties of mortar printed on a 3D printer
Mukhametrakhimov, R. Kh
Lukmanova, L., V
[J]. MAGAZINE OF CIVIL ENGINEERING, 2021, 102 (02):
[24] Hollow Core Terahertz Waveguide Fabricated using a 3D Printer
Yudasari, Nurfina
Vogt, Dominik
Anthony, Jessienta
Leonhardt, Rainer
[J]. 2014 39TH INTERNATIONAL CONFERENCE ON INFRARED, MILLIMETER, AND TERAHERTZ WAVES (IRMMW-THZ), 2014,
[25] Printing Ceramic Parts Using the New CERAMAKER 3D Printer
不详
[J]. CFI-CERAMIC FORUM INTERNATIONAL, 2014, 91 (08): : 13 - 13
[26] Production of Multiple Material Parts Using a Desktop 3D Printer
Butt, Javaid
Mebrahtu, Habtom
Shirvani, Hassan
[J]. ADVANCES IN MANUFACTURING TECHNOLOGY XXXI, 2017, 6 : 148 - 153
[27] Design, testing, and application of an open-source powder material extrusion 3D printer
Miao, Xinyu
Chin, Kyle C.H.
Boydston, Andrew J.
[J]. Additive Manufacturing, 2024, 81
[28] Making 3D Replicas Using a Flatbed Scanner and a 3D Printer
Skala, Vaclav
Pan, Rongjiang
Nedved, Ondrej
[J]. COMPUTATIONAL SCIENCE AND ITS APPLICATIONS, PART VI - ICCSA 2014, 2014, 8584 : 76 - 86
[29] Design, testing, and application of an open-source powder material extrusion 3D printer
Miao, Xinyu
Chin, Kyle C. H.
Boydston, Andrew J.
[J]. ADDITIVE MANUFACTURING, 2024, 81
[30] Surface Anisotropy on 3D Printed Parts
Ficzere, Peter
[J]. PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, 2024, 68 (03): : 272 - 277

← 1 2 3 4 5 →