Stable phase formation in a 85.67 wt.% Cu-9.9 wt.% Al-4.43 wt.% Ni shape memory alloy

被引：1

作者：

Chentouf, S. M. ^{[1
]}

Bouabdallah, M. ^{[2
]}

Cheniti, H. ^{[1
]}

Keddam, M. ^{[1
]}

机构：

[1] Univ Sci & Technol Houari Boumedienne, Fac Genie Mecan & Genie Procedes, Dept Mat Sci, BP 32, El Alia Bab Ezzouar 16111, Alger, Algeria

[2] Ecole Natl Polytech Alger, Lab Genie Sism & Dynam Struct, El Harrach 16200, Alger, Algeria

来源：

ESOMAT 2009 - 8TH EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS | 2009年

关键词：

Martensitic transformation; Shape memory alloys; AlNi precipitation; BETA-PHASE; DECOMPOSITION PROCESS; TRANSFORMATION;

D O I：

10.1051/esomat/200905005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

85.67 wt.% Cu-9.9 wt.% Al-4.43 wt.% Ni shape memory alloy has been studied. Polycrystalline specimens have been quenched, into water, after heat treatment at high temperature and followed by two successive runs from room temperature to 923 K and inversely. The microstructural and thermodynamic studies presented in this work have been performed using DSC (Differential Scanning Calorimetry), X-ray diffraction analysis at a variable temperature and TEM (Transmission Electron Microscopy) analysis. Stable phase precipitation of AlNi type was observed to appear in this alloy.

引用

页数：4

共 50 条

[41] The microstructures of a thermally sprayed and heat treated Al-20 wt.%Sn-3 wt.%Si alloy
Kong, CJ
Brown, PD
Harris, SJ
McCartney, DG
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 403 (1-2): : 205 - 214
[42] Dissolution Behavior of Cu-2.0 wt.% Be (Alloy 25) and Cu-0.1 wt.% Fe (C19210) Substrates in Molten Sn-9 wt.%Zn Solder
Laksono, Andromeda Dwi
Shen, Yu-An
Chen, Ting
Yen, Yee-Wen
JOM, 2024, 76 (06) : 2754 - 2762
[43] Dissolution Behavior of Cu-2.0 wt.% Be (Alloy 25) and Cu-0.1 wt.% Fe (C19210) Substrates in Molten Sn-9 wt.%Zn Solder
Andromeda Dwi Laksono
Yu-An Shen
Ting Chen
Yee-Wen Yen
JOM, 2024, 76 : 2754 - 2762
[44] Mechanism and kinetics of aging of high-strength Cu-5 wt.% Ni-2.5 wt.% Ti
Cancarevic, M
Jovanovic, MT
Romhanji, E
Zec, S
ZEITSCHRIFT FUR METALLKUNDE, 2005, 96 (01): : 78 - 82
[45] Physical properties of Zn-22 wt.% Al-x wt.% Ce melt spun eutectoid alloy
Ahmed, E. M.
CRYSTAL RESEARCH AND TECHNOLOGY, 2012, 47 (06) : 689 - 695
[46] Microstructure and mechanical behaviour of a precipitation hardened Ni-25 wt.% Mo-8 wt.% Cr alloy
Dymek, S
Dollar, M
Wróbel, M
Blicharski, M
ARCHIVES OF METALLURGY, 2000, 45 (04): : 393 - 420
[47] The microstructure of a Mg-10 wt.%Al alloy
Braszczynska, KN
ZEITSCHRIFT FUR METALLKUNDE, 2002, 93 (08): : 845 - 850
[48] Investigation on microstructure characterizations and phase compositions of rapidly solidification/powder metallurgy Mg-6 wt.% Zn-5 wt.% Ce-1.5 wt.% Ca alloy
Zhou, Tao
Xia, Hua
Yang, Mingbo
Zhou, Zhiming
Chen, Kang
Hu, Jianjun
Chen, Zhenhua
JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (09) : L145 - L149
[49] Research on dynamic precipitation behavior of pre-solution treated Mg-5 wt.% Zn-2 wt.% Al(-2 wt. %Y) alloy during creep
Zeng, Xiaoqin
Zou, Honghui
Zhai, Chunquan
Ding, Wenjiang
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 424 (1-2): : 40 - 46
[50] Effect of Ag addition on the martensitic phase of the Cu-10 wt.% Al alloy
Silva, R. A. G.
Cuniberti, A.
Stipcich, M.
Adorno, A. T.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 456 (1-2): : 5 - 10

← 1 2 3 4 5 →