Stable phase formation in a 85.67 wt.% Cu-9.9 wt.% Al-4.43 wt.% Ni shape memory alloy

被引：1

作者：

Chentouf, S. M. ^{[1
]}

Bouabdallah, M. ^{[2
]}

Cheniti, H. ^{[1
]}

Keddam, M. ^{[1
]}

机构：

[1] Univ Sci & Technol Houari Boumedienne, Fac Genie Mecan & Genie Procedes, Dept Mat Sci, BP 32, El Alia Bab Ezzouar 16111, Alger, Algeria

[2] Ecole Natl Polytech Alger, Lab Genie Sism & Dynam Struct, El Harrach 16200, Alger, Algeria

来源：

ESOMAT 2009 - 8TH EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS | 2009年

关键词：

Martensitic transformation; Shape memory alloys; AlNi precipitation; BETA-PHASE; DECOMPOSITION PROCESS; TRANSFORMATION;

D O I：

10.1051/esomat/200905005

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

85.67 wt.% Cu-9.9 wt.% Al-4.43 wt.% Ni shape memory alloy has been studied. Polycrystalline specimens have been quenched, into water, after heat treatment at high temperature and followed by two successive runs from room temperature to 923 K and inversely. The microstructural and thermodynamic studies presented in this work have been performed using DSC (Differential Scanning Calorimetry), X-ray diffraction analysis at a variable temperature and TEM (Transmission Electron Microscopy) analysis. Stable phase precipitation of AlNi type was observed to appear in this alloy.

引用

页数：4

共 50 条

[31] Investigation of trace elements in an Al-4.8 wt.% Mg-0.3 wt.% Mn alloy
Simensen, CJ
Södervall, U
SURFACE AND INTERFACE ANALYSIS, 2000, 30 (01) : 309 - 314
[32] Pore filling in graphite particle compacts infiltrated with Al-12 wt.%Si and Al-12 wt.%Si-1 wt.%Cu alloys
Rodriguez-Guerrero, A.
Molina, J. M.
Rodriguez-Reinoso, F.
Narciso, J.
Louis, E.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 495 (1-2): : 276 - 281
[33] Melt spinning of Ni-12.5 wt.%Al alloy
Torkar, M
Sustarsic, B
MATERIALS AND MANUFACTURING PROCESSES, 1997, 12 (03) : 409 - 416
[34] Rapid precipitation of dispersoids during extrusion of an Al-0.91 wt.% Mn-0.13 wt.% Zr-0.17 wt.% Sc-alloy
Forbord, B.
Auran, L.
Lefebvre, W.
Hallem, H.
Marthinsen, K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 424 (1-2): : 174 - 180
[35] Effects of 0.1 wt.% Manganese, Aluminum, and Silicon on Oxidation and Copper-rich Liquid Phase Formation in an Iron-0.3 wt.% Copper-0.15 Wt.% Nickel Alloy
Webler, Bryan A.
Sridhar, Seetharaman
OXIDATION OF METALS, 2009, 71 (1-2): : 21 - 42
[36] Microstructure and Hot Deformation Behavior of the Mg-8 wt.% Sn-1.5 wt.% Al Alloy
Sun, Zhaoqian
Li, Yongjun
Zhang, Kui
Li, Xinggang
Ma, Minglong
Shi, Guoliang
Yuan, Jiawei
Zhang, Hongju
MATERIALS, 2021, 14 (08)
[37] Discontinuous and continuous precipitation in Cu-13 wt.% Sn and Al-20 wt.% Ag alloys
Hamana, D
Boumerzoug, Z
Fatmi, M
Chekroud, S
MATERIALS CHEMISTRY AND PHYSICS, 1998, 53 (03) : 208 - 216
[38] Structural Characterization of Cu-13.58%Al-3.94%Ni (wt. %) shape memory alloy elaborated by fusion
Zeghdane, S.
Necib, K.
Britah, A.
ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6, 2010, 6
[39] Study of the shape-memory effect in Co-5 wt.% Al alloy
Hryshchenko, OP
Koval', YM
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2000, 22 (08): : 60 - 63
[40] Influence of previous ageing treatments on the strength of an Al-4.3 wt.% Mg-1.2 wt.% Cu alloy processed by ECAE
Zhang, Zheng-Rong
Van Houtte, Paul
Verlinden, Bert
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2008, 99 (03) : 273 - 280

← 1 2 3 4 5 →