Modelling cyclic shear deformation of fibre/epoxy layers in fibre metal laminates

被引：16
|
作者：
Alderliesten, Rene [1 ]
Campoli, Glanni [1 ]
Benedictus, Rinze [1 ]
机构：
[1] Delft Univ Technol, Fac Aerosp Engn, Struct & Mat Lab, NL-2600 GB Delft, Netherlands
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2007年 / 67卷 / 11-12期
关键词：
C; crack; deformation; delamination; B; fatigue; C. fibre bridging;
D O I：
10.1016/j.compscitech.2006.12.011
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Relations for a theoretical model were derived describing the shear deformation of uni-directional fibre/epoxy layers in Fibre Metal Laminates. The shear deformation is induced by the cyclic shear stresses at the interface that result from the cyclic load transfer from aluminium to the bridging fibre/epoxy layers during fatigue loading of the laminate. With the presented relations the crack opening contribution as result of shear deformation can be calculated. As the shear deformation is hard to measure experimentally, the theoretical model has been validated by comparing the model with finite element analysis. A good correlation has been obtained between the presented theoretical model and the FE-model representing the complex reality. (c) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2545 / 2555
页数：11
相关论文
共 50 条
  • [41] An Historic Overview of the Development of Fibre Metal Laminates
    C. A. J. R. Vermeeren
    Applied Composite Materials, 2003, 10 : 189 - 205
  • [42] MODELING BLAST FAILURE OF FIBRE METAL LAMINATES
    Sitnikova, E.
    Guan, Z. W.
    Cantwell, W. J.
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [43] Delamination buckling of fibre-metal laminates
    Remmers, JJC
    de Borst, R
    COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (15) : 2207 - 2213
  • [44] Material characterisation and optimisation of fibre metal laminates
    van Rooijen, R
    Sinke, J
    de Vries, TJ
    van der Zwaag, S
    COMPUTATIONAL METHODS IN MATERIALS CHARACTERISATION, 2004, 6 : 55 - 64
  • [45] Thermal cycling of (heated) fibre metal laminates
    Muller, Bernhard
    Hagenbeek, Michiel
    Sinke, Jos
    COMPOSITE STRUCTURES, 2016, 152 : 106 - 116
  • [46] An historic overview of the development of fibre metal laminates
    Vermeeren, CAJR
    APPLIED COMPOSITE MATERIALS, 2003, 10 (4-5) : 189 - 205
  • [47] On the prediction of bearing failure in fibre metal laminates
    Krimbalis, P. P.
    Poon, C.
    Fawaz, Z.
    Behdinan, K.
    DESIGN, MANUFACTURING AND APPLICATIONS OF COMPOSITES, 2006, : 202 - 209
  • [48] A review on forming technologies of fibre metal laminates
    Ding Z.
    Wang H.
    Luo J.
    Li N.
    International Journal of Lightweight Materials and Manufacture, 2021, 4 (01): : 110 - 126
  • [49] The impact response of novel fibre metal laminates
    Cantwell, WJ
    Jones, N
    Wade, GA
    Reyes, G
    Guillen, JF
    Compston, P
    HIGH PERFORMANCE STRUCTURES AND COMPOSITES, 2002, 4 : 33 - 45
  • [50] On the measurement of residual stresses in fibre metal laminates
    Morteza Abouhamzeh
    Niall Smyth
    Jos Sinke
    The International Journal of Advanced Manufacturing Technology, 2021, 113 : 1663 - 1671
12345