Modelling cyclic shear deformation of fibre/epoxy layers in fibre metal laminates

被引：16
|
作者：
Alderliesten, Rene [1 ]
Campoli, Glanni [1 ]
Benedictus, Rinze [1 ]
机构：
[1] Delft Univ Technol, Fac Aerosp Engn, Struct & Mat Lab, NL-2600 GB Delft, Netherlands
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2007年 / 67卷 / 11-12期
关键词：
C; crack; deformation; delamination; B; fatigue; C. fibre bridging;
D O I：
10.1016/j.compscitech.2006.12.011
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Relations for a theoretical model were derived describing the shear deformation of uni-directional fibre/epoxy layers in Fibre Metal Laminates. The shear deformation is induced by the cyclic shear stresses at the interface that result from the cyclic load transfer from aluminium to the bridging fibre/epoxy layers during fatigue loading of the laminate. With the presented relations the crack opening contribution as result of shear deformation can be calculated. As the shear deformation is hard to measure experimentally, the theoretical model has been validated by comparing the model with finite element analysis. A good correlation has been obtained between the presented theoretical model and the FE-model representing the complex reality. (c) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2545 / 2555
页数：11
相关论文
共 50 条
  • [31] Property optimisation in fibre metal laminates
    Van Rooijen, R
    Sinke, J
    De Vries, TJ
    Van der Zwaag, S
    APPLIED COMPOSITE MATERIALS, 2004, 11 (02) : 63 - 76
  • [32] Laser forming of fibre metal laminates
    Edwardson, SP
    French, P
    Dearden, G
    Watkins, KG
    Cantwell, WJ
    LASERS IN ENGINEERING, 2005, 15 (3-4) : 233 - 255
  • [33] Progressive Fatigue Modelling of Open-Hole Glass-Fibre Epoxy Laminates
    Maneval, Victor
    Vedvik, Nils-Petter
    Echtermeyer, Andreas T.
    JOURNAL OF COMPOSITES SCIENCE, 2023, 7 (12):
  • [34] LAMINATES - POLYESTER EPOXY RESINS REINFORCED WITH GLASS FIBRE
    HALAS, HF
    PRZEMYSL CHEMICZNY, 1968, 47 (07): : 387 - &
  • [35] Modelling the Behaviour of Fibre-Metal Laminates subjected to Localised Blast Loading
    Karagiozova, D.
    Langdon, G. S.
    Nurick, G. N.
    IUTAM SYMPOSIUM ON THEORETICAL, COMPUTATIONAL AND MODELLING ASPECTS OF INELASTIC MEDIA, 2008, 11 : 319 - 328
  • [36] The influence of aqueous environment, temperature and cyclic loading on glass-fibre/epoxy composite laminates
    Ellyin, F
    Rohrbacher, C
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2003, 22 (07) : 615 - 636
  • [37] Effect of long-term thermal cycling and moisture on heated Fibre Metal Laminates and glass-fibre epoxy composites
    Hagenbeek, Michiel
    Sinke, Jos
    COMPOSITE STRUCTURES, 2019, 210 : 500 - 508
  • [38] Predicting the influence of discretely notched layers on fatigue crack growth in fibre metal laminates
    Wang, W.
    Rans, C.
    Alderliesten, R. C.
    Benedictus, R.
    ENGINEERING FRACTURE MECHANICS, 2015, 145 : 1 - 14
  • [39] Interfacial fracture of the fibre-metal laminates based on fibre reinforced thermoplastics
    Abdullah, M. R.
    Prawoto, Y.
    Cantwell, W. J.
    MATERIALS & DESIGN, 2015, 66 : 446 - 452
  • [40] Recycling of Aluminum from Fibre Metal Laminates
    祝国梁
    肖艳萍
    杨永祥
    王俊
    孙宝德
    BOOM Rob
    Journal of Shanghai Jiaotong University(Science), 2012, 17 (03) : 263 - 267
12345