Modelling cyclic shear deformation of fibre/epoxy layers in fibre metal laminates

被引：16
|
作者：
Alderliesten, Rene [1 ]
Campoli, Glanni [1 ]
Benedictus, Rinze [1 ]
机构：
[1] Delft Univ Technol, Fac Aerosp Engn, Struct & Mat Lab, NL-2600 GB Delft, Netherlands
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2007年 / 67卷 / 11-12期
关键词：
C; crack; deformation; delamination; B; fatigue; C. fibre bridging;
D O I：
10.1016/j.compscitech.2006.12.011
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Relations for a theoretical model were derived describing the shear deformation of uni-directional fibre/epoxy layers in Fibre Metal Laminates. The shear deformation is induced by the cyclic shear stresses at the interface that result from the cyclic load transfer from aluminium to the bridging fibre/epoxy layers during fatigue loading of the laminate. With the presented relations the crack opening contribution as result of shear deformation can be calculated. As the shear deformation is hard to measure experimentally, the theoretical model has been validated by comparing the model with finite element analysis. A good correlation has been obtained between the presented theoretical model and the FE-model representing the complex reality. (c) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2545 / 2555
页数：11
相关论文
共 50 条
  • [21] Tensile and flexural properties of epoxy laminates with natural papaya bast fibre cellular layers
    Cota Coura, Gabriela Luiza
    Santos Freire, Rodrigo Teixeira
    dos Santos, Julio Cesar
    de Oliveira, Livia Avila
    Scarpa, Fabrizio
    Panzera, Tulio Hallak
    COMPOSITES PART C: OPEN ACCESS, 2020, 2
  • [22] Degradation Behavior of Epoxy Resins in Fibre Metal Laminates Under Thermal Conditions
    祝国梁
    肖艳萍
    杨永祥
    王俊
    孙宝德
    BOOM Rob
    JournalofShanghaiJiaotongUniversity(Science), 2012, 17 (03) : 257 - 262
  • [23] Degradation behavior of epoxy resins in fibre metal laminates under thermal conditions
    Guo-Liang Z.
    Yan-Ping X.
    Yong-Xiang Y.
    Jun W.
    Bao-De S.
    Rob B.
    Journal of Shanghai Jiaotong University (Science), 2012, 17 (3) : 257 - 262
  • [24] Static properties of fibre metal laminates
    Hagenbeek, M
    Van Hengel, C
    Bosker, OJ
    Vermeeren, CAJR
    APPLIED COMPOSITE MATERIALS, 2003, 10 (4-5) : 207 - 222
  • [25] Fibre metal laminates: a state of the art
    Vlot, A
    Alderliesten, RC
    Hooijmeijer, PA
    de Kanter, JLCG
    Sinke, J
    Ypma, MS
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2002, 17 (1-2): : 79 - 98
  • [26] Crack closure in fibre metal laminates
    Plokker, H. M.
    Alderliesten, R. C.
    Benedictus, R.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2007, 30 (07) : 608 - 620
  • [27] Impact loading on Fibre Metal Laminates
    Vlot, A
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 1996, 18 (03) : 291 - 307
  • [28] Static Properties of Fibre Metal Laminates
    M. Hagenbeek
    C. van Hengel
    O. J. Bosker
    C. A. J. R. Vermeeren
    Applied Composite Materials, 2003, 10 : 207 - 222
  • [29] Fatigue initiation in fibre metal laminates
    Homan, JJ
    INTERNATIONAL JOURNAL OF FATIGUE, 2006, 28 (04) : 366 - 374
  • [30] Property Optimisation in Fibre Metal Laminates
    R. van Rooijen
    J. Sinke
    T. J. De Vries
    S. van der Zwaag
    Applied Composite Materials, 2004, 11 : 63 - 76
12345