Formation of ferrite with Cr equivalents and solidification rates in Mod. (9-12)Cr-1Mo steels

被引：1

作者：

Kim, Y. H. ^{[1
]}

Kim, H. C. ^{[1
]}

Jung, Y. G. ^{[1
]}

Lee, J. H. ^{[1
]}

Chi, B. H. ^{[2
]}

Ryu, S. H. ^{[2
]}

机构：

[1] Changwon Natl Univ, Dept Mat Sci & Engn, Chang Won, South Korea

[2] Doosan Heavy Ind Co, R&D Ctr, Chang Won, South Korea

来源：

ADVANCES IN NANOMATERIALS AND PROCESSING, PTS 1 AND 2 | 2007年 / 124-126卷

关键词：

Mod.12Cr-1Mo steel; directional solidification; ferrite; segregation;

D O I：

10.4028/www.scientific.net/SSP.124-126.1497

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The influence of solidification rates and Cr equivalents on the formation of the ferrite was studied by directional solidification in mod. (9-12)Cr-1Mo steels. It was found that the volume fraction of ferrite increased as increasing Cr equivalent and solidification rate. The volume fraction of the ferrite showed much higher at low solidification rates with the planar or cellular interface than that at high solidification rates with the dendritic interface. The volume fraction of ferrite in solidification microstructure showed much higher than that in extruded and heat-treated alloys. It depends on not only solidification rate and Cr equivalent but also the solidification fraction. At low solidification rates, there occurs segregation because the solid/liquid interface was planar or cellular, and it makes composition change with solidification fractions. The formation of ferrite has been discussed with Cr equivalent and solidification rate.

引用

页码：1497 / +

页数：2

共 50 条

[31] EFFECT OF CONSTRAINT ON CREEP CRACK PROPAGATION OF MOD. 9CR-1Mo STEEL WELD JOINT
Yamamoto, Masato
Miura, Naoki
Ogata, Takashi
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 6, PTS A AND B, 2010, : 1533 - 1539
[32] Microstructural aspects of the weldability of advanced 9-12% Cr-steels
Letofsky, E
Cerjak, H
MODELLING OF MICROSTRUCTURAL EVOLUTION IN CREEP RESISTANT MATERIALS, 1999, (03): : 91 - 103
[33] New concept for the optimization of modern 9-12% Cr-steels
Schaffernak, B., 2000, VGB-Kraftwerkstechnik GmbH, Essen, Germany (80):
[34] Role of copper on Laves phase morphology in 9-12%Cr steels
Danielsen, Hilmar K.
Liu, Fang
38TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE, 2017, 219
[35] The impact of welding on the creep properties of advanced 9-12% Cr steels
Mayr, Peter
Cerjak, Horst
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2010, 63 (2-3): : 131 - 136
[36] Irradiation behavior of ferritic-martensitic 9-12%Cr steels
Horsten, MG
van Osch, EV
Gelles, DS
Hamilton, ML
EFFECTS OF RADIATION ON MATERIALS: 19TH INTERNATIONAL SYMPOSIUM, 2000, 1366 : 579 - 593
[37] Evaluation of structural stability and creep resistance of 9-12% Cr steels
Foldyna, V
Kubon, Z
Filip, M
Mayer, KH
Berger, C
STEEL RESEARCH, 1996, 67 (09): : 375 - 381
[38] Quantification of precipitates in advanced creep resistant 9-12% Cr steels
Hofer, P
Cerjak, H
Schaffernak, B
Warbichler, P
STEEL RESEARCH, 1998, 69 (08): : 343 - 348
[39] The effect of welding on the microstructural development of advanced 9-12 Cr steels
Cerjak, H
Letofsky, E
MICROSTRUCTURAL STABILITY OF CREEP RESISTANT ALLOYS FOR HIGH TEMPERATURE PLANT APPLICATIONS, 1998, (02): : 323 - 337
[40] Developmental state of high alloy 9-12%Cr-steels
Oehmigen, HG
Berger, C
Bretfeld, H
CORROSIVE DAMAGE IN POWER PLANTS, 1997, 1333 : 231 - 268

← 1 2 3 4 5 →