Formation of ferrite with Cr equivalents and solidification rates in Mod. (9-12)Cr-1Mo steels

被引：1
|
作者：
Kim, Y. H. [1 ]
Kim, H. C. [1 ]
Jung, Y. G. [1 ]
Lee, J. H. [1 ]
Chi, B. H. [2 ]
Ryu, S. H. [2 ]
机构：
[1] Changwon Natl Univ, Dept Mat Sci & Engn, Chang Won, South Korea
[2] Doosan Heavy Ind Co, R&D Ctr, Chang Won, South Korea
来源：
ADVANCES IN NANOMATERIALS AND PROCESSING, PTS 1 AND 2 | 2007年 / 124-126卷
关键词：
Mod.12Cr-1Mo steel; directional solidification; ferrite; segregation;
D O I：
10.4028/www.scientific.net/SSP.124-126.1497
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The influence of solidification rates and Cr equivalents on the formation of the ferrite was studied by directional solidification in mod. (9-12)Cr-1Mo steels. It was found that the volume fraction of ferrite increased as increasing Cr equivalent and solidification rate. The volume fraction of the ferrite showed much higher at low solidification rates with the planar or cellular interface than that at high solidification rates with the dendritic interface. The volume fraction of ferrite in solidification microstructure showed much higher than that in extruded and heat-treated alloys. It depends on not only solidification rate and Cr equivalent but also the solidification fraction. At low solidification rates, there occurs segregation because the solid/liquid interface was planar or cellular, and it makes composition change with solidification fractions. The formation of ferrite has been discussed with Cr equivalent and solidification rate.
引用
收藏
页码：1497 / +
页数：2
相关论文
共 50 条
  • [21] Hierarchical approach for the creep modeling of 9-12% Cr steels
    Weinert, P
    Buchmayr, B
    CREEP DEFORMATION: FUNDAMENTALS AND APPLICATIONS, 2002, : 257 - 266
  • [22] Microstructural degradation in 9-12% Cr power plant steels
    Strang, A
    COMPASS 1999 : COMPONENT OPTIMISATION FROM MATERIALS PROPERTIES AND SIMULATION SOFTWARE, 1999, : 167 - 176
  • [23] Metallurgy and creep properties of new 9-12%Cr steels
    Hald, J
    STEEL RESEARCH, 1996, 67 (09): : 369 - 374
  • [24] Evaluation of microstructural parameters in 9-12% Cr-steels
    Maile, K.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2007, 84 (1-2) : 62 - 68
  • [25] Microstructural evolution in creep tested 9-12% Cr steels
    Benvenuti, A.
    Bontempi, P.
    Ricci, N.
    Metallurgia Italiana, 1995, 87 (8-9): : 421 - 426
  • [26] Tensile Deformation Study on Heat Affected Zone of Mod. 9Cr-1Mo Steel Weld
    Nikhil, R.
    Krishnan, S. A.
    Moitra, A.
    Vasudevan, M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (05) : 2288 - 2297
  • [27] Creep-fatigue crack behaviour of a mod. 9Cr-1Mo steel structure with weldments
    Hyeong-Yeon Lee
    Jong-Bum Kim
    Woo-Gon Kim
    Jae-Han Lee
    Transactions of the Indian Institute of Metals, 2010, 63 : 245 - 250
  • [28] Tensile Deformation Study on Heat Affected Zone of Mod. 9Cr-1Mo Steel Weld
    R. Nikhil
    S. A. Krishnan
    A. Moitra
    M. Vasudevan
    Journal of Materials Engineering and Performance, 2023, 32 : 2288 - 2297
  • [29] Creep-fatigue crack behaviour of a mod. 9Cr-1Mo steel structure with weldments
    Lee, Hyeong-Yeon
    Kim, Jong-Bum
    Kim, Woo-Gon
    Lee, Jae-Han
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2010, 63 (2-3): : 245 - 250
  • [30] VGM based ductile damage parameter for fracture prediction in Mod. 9Cr-1 Mo steel
    Krishnan, S. A.
    Nikhil, R.
    Moitra, A.
    Vasudevan, M.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2022, 199
12345