Formation of ferrite with Cr equivalents and solidification rates in Mod. (9-12)Cr-1Mo steels

被引：1

作者：

Kim, Y. H. ^{[1
]}

Kim, H. C. ^{[1
]}

Jung, Y. G. ^{[1
]}

Lee, J. H. ^{[1
]}

Chi, B. H. ^{[2
]}

Ryu, S. H. ^{[2
]}

机构：

[1] Changwon Natl Univ, Dept Mat Sci & Engn, Chang Won, South Korea

[2] Doosan Heavy Ind Co, R&D Ctr, Chang Won, South Korea

来源：

ADVANCES IN NANOMATERIALS AND PROCESSING, PTS 1 AND 2 | 2007年 / 124-126卷

关键词：

Mod.12Cr-1Mo steel; directional solidification; ferrite; segregation;

D O I：

10.4028/www.scientific.net/SSP.124-126.1497

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The influence of solidification rates and Cr equivalents on the formation of the ferrite was studied by directional solidification in mod. (9-12)Cr-1Mo steels. It was found that the volume fraction of ferrite increased as increasing Cr equivalent and solidification rate. The volume fraction of the ferrite showed much higher at low solidification rates with the planar or cellular interface than that at high solidification rates with the dendritic interface. The volume fraction of ferrite in solidification microstructure showed much higher than that in extruded and heat-treated alloys. It depends on not only solidification rate and Cr equivalent but also the solidification fraction. At low solidification rates, there occurs segregation because the solid/liquid interface was planar or cellular, and it makes composition change with solidification fractions. The formation of ferrite has been discussed with Cr equivalent and solidification rate.

引用

页码：1497 / +

页数：2

共 50 条

[11] ESTIMATION OF HYDROGEN ATTACK LIMIT OF 2.25 CR-1MO AND 3CR-1MO STEELS
SAKAI, T
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 24 (10) : B360 - B360
[12] Effects of Thermal Simulation on the Creep Fracture of the Mod. 9Cr-1Mo Weld Metal
Liao, Chien-Chun
Wang, Chu-Chun
Chen, Tai-Cheng
Shiue, Ren-Kae
Tsay, Leu-Wen
METALS, 2020, 10 (09) : 1 - 17
[13] Evaluation of Factors Affecting Cyclic Softening Behaviors of Mod. 9Cr-1Mo Steel
Kim, Dae Whan
Ryu, Woo-Seog
11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10
[14] Creep Behavior, Deformation Mechanisms, and Creep Life of Mod. 9Cr-1Mo Steel
Abe, Fujio
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (12): : 5610 - 5625
[15] Modification in the Microstructure of Mod. 9Cr-1Mo Ferritic Martensitic Steel Exposed to Sodium
T. N. Prasanthi
Cheruvathur Sudha
V. Thomas Paul
N. Sivai Bharasi
S. Saroja
M. Vijayalakshmi
Metallurgical and Materials Transactions A, 2014, 45 : 4220 - 4234
[16] EFFECTS OF HEAT-TREATMENT ON DELTA-FERRITE IN A 12 CR-1MO STEEL
WILCOX, RC
CHIN, BA
JOURNAL OF METALS, 1983, 35 (08): : A10 - A10
[17] Advances in Welded Creep Resistant 9-12% Cr Steels
Abson, D. J.
Rothwell, J. S.
Cane, B. J.
ADVANCES IN MATERIALS TECHNOLOGY FOR FOSSIL POWER PLANTS, 2008, : 790 - 808
[18] Influence of aluminium on creep strength of 9-12% Cr steels
Magnusson, Hans
Sandstrom, Rolf
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 527 (1-2): : 118 - 125
[19] Martensite microstructure of 9-12%Cr steels weld metals
Onoro, J.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 180 (1-3) : 137 - 142
[20] Weld metal microstructure analysis of 9-12% Cr steels
Onoro, J.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2006, 83 (07) : 540 - 545

← 1 2 3 4 5 →