Turning of Aluminum Alloy Al-6063 under Dry and Wet Condition using CVD Coated Tool

被引：2

作者：

Zakaria, M. S. ^{[1
]}

Afiq, Adam ^{[1
]}

Hafiz, Muhammad ^{[1
]}

Jamalludin, Mohd Riduan ^{[1
]}

Rosli, M. U. ^{[1
]}

Rahim, Wan M. Faizal Wan A. ^{[1
]}

Ishak, Muhammad Ikman ^{[1
]}

Khor, C. Y. ^{[1
]}

Nawi, M. A. M. ^{[1
]}

Shahrin, Suhaimi ^{[1
]}

机构：

[1] Univ Malaysia Perlis, Fac Engn Technol, KampusUniCITI Alam, Padang Besar 02100, Perlis, Malaysia

来源：

GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS | 2018年 / 2030卷

关键词：

PERFORMANCE; SPEED;

D O I：

10.1063/1.5066670

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

In present paper, cutting parameters are investigated in turning of Al-6063 using carbide inserts based on two level factorial design. The cutting insert with CVD coated TiC + Al2O3 + TiN. Experiments is conducted in dry and wet condition. The selected cutting parameters for turning process are cutting speed, feed rate and depth of cut with each two levels, maintaining nose radius and rake angle. It is found feed rate is the most significant factor affecting surface roughness and followed by cutting speed and depth of cut. The minimum surface roughness is obtained when low feed rate and low cutting speed are employed in wet condition.

引用

页数：5

共 50 条

[1] A Study on Chip Morphology of Aluminum Alloy 6063 during Turning under Pre Cooled Cryogenic and Dry Environments
Eapen, Jenso
Murugappan, Shanmugam
Arul, Sanjivi
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 7686 - 7693
[2] Fabrication and Cutting Performance of CVD Diamond Coated Inserts with Different Coating Thickness in Dry Turning Aluminum Alloy
Zhang, Jianguo
Wang, Liang
Shen, Bin
Sun, Fanghong
ULTRA-PRECISION MACHINING TECHNOLOGIES, 2012, 497 : 73 - 77
[3] Production and mechanical characterization of Ni-coated carbon fibers reinforced Al-6063 alloy matrix composites
Alten, Anil
Erzi, Eray
Gursoy, Ozen
Agaoglu, Gokce Hapci
Dispinar, Derya
Orhan, Gokhan
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 787 : 543 - 550
[4] Development of Microstructure and Fracture Toughness of AL-6063 alloy Using Equal Channel Angular Extrusion
Nemati, J.
Sulaiman, S.
Majzoobi, G. H.
Hanim, M. A. Azmah
Baharudin, B. T. H. T.
ADVANCES IN MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 564 : 488 - +
[5] Optimization of CNC Turning Parameters on Aluminum Alloy 6063 using TaguchiRobust Design
Saravanakumar, A.
Karthikeyan, S. C.
Dhamotharan, B.
Kumar, V. Gokul
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 8290 - 8298
[6] Experimental Investigation of High-Speed Turning of INCONEL 718 Using PVD-Coated Carbide Tool Under Wet Condition
Chaurasia, Ankur
Wankhede, Vishal
Chaudhari, Rakesh
INNOVATIONS IN INFRASTRUCTURE, 2019, 757 : 367 - 374
[7] Effect of alcohol aqueous solution mist in turning of aluminum alloy using DLC coated tool
Yokota, T., 2013, Japan Society for Precision Engineering (79):
[8] An Experimental Study on Turning of AL6063 Under Cryogenic Pre Cooled Condition
Murugappan, Shanmugam
Arul, Sanjivi
Narayanan, Surendran K.
MIC2015 -15TH MACHINING INNOVATIONS CONFERENCE FOR AEROSPACE INDUSTRY, 2015, 35 : 61 - 66
[9] Development of Protruded Textured HSS Cutting Tool and Study of Its Impact on Cutting Performance during Dry Turning of Al 6063 Alloy
Prasad, K. Nagendra
Ismail, Syed
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2023, 21 (04) : 1431 - 1439
[10] Evaluation and Performance Improvement of Environmentally Friendly Sustainable Turning of 6063 Aluminum Alloy in Dry Conditions Using Grey Relational Analysis
Kannan, A.
Sivaram, N. M.
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2024, 21 (01) : 11085 - 11098

← 1 2 3 4 5 →