Bonding and hardness in nonhydrogenated carbon films with moderate sp3 content

被引:45
|
作者
Gago, R
Jiménez, I
Albella, JM
Climent-Font, A
Cáceres, D
Vergara, I
Banks, JC
Doyle, BL
Terminello, LJ
机构
[1] CSIC, Inst Ciencia Mat Madrid, E-28049 Madrid, Spain
[2] Univ Autonoma Madrid, Dept Fis Aplicada C12, E-28049 Madrid, Spain
[3] Univ Carlos III Madrid, Dept Fis Aplicada, Leganes 28911, Spain
[4] Sandia Natl Labs, Radiat Solid Interact & Proc, Albuquerque, NM 87185 USA
[5] Lawrence Livermore Natl Lab, Livermore, CA 94550 USA
[6] Stanford Synchrotron Radiat Lab, Stanford, CA 94309 USA
关键词
D O I
10.1063/1.373514
中图分类号
O59 [应用物理学];
学科分类号
摘要
Amorphous carbon films with an sp(3) content up to 25% and a negligible amount of hydrogen have been grown by evaporation of graphite with concurrent Ar+ ion bombardment. The sp(3) content is maximized for Ar+ energies between 200 and 300 eV following a subplantation mechanism. Higher ion energies deteriorate the film due to sputtering and heating processes. The hardness of the films increases in the optimal assisting range from 8 to 18 GPa, and is explained by crosslinking of graphitic planes through sp(3) connecting sites. (C) 2000 American Institute of Physics. [S0021-8979(00)08911-8].
引用
收藏
页码:8174 / 8180
页数:7
相关论文
共 50 条
  • [41] Role of nitrogen in evolution of sp2/sp3 bonding and optical band gap in hydrogenated carbon nitride
    Majumdar, Abhijit
    Das, Sadhan Chandra
    Bogdanowicz, Robert
    Shripathi, Thoudinja
    Langel, Walter
    Hippler, Rainer
    VIBRATIONAL SPECTROSCOPY, 2013, 66 : 63 - 68
  • [42] Chemical bonding, structure, and hardness of carbon nitride thin films
    Zheng, WT
    Yu, WX
    Li, HB
    Wang, YM
    Cao, PJ
    Jin, ZS
    Broitman, E
    Sundgren, JE
    DIAMOND AND RELATED MATERIALS, 2000, 9 (9-10) : 1790 - 1794
  • [43] Formation of SP3 Rich Carbon Films Using High Power Impulse Technique
    2015, Institute of Electrical Engineers of Japan (135):
  • [44] Magnetic quantization of sp3 bonding in monolayer gray tin
    Chen, Szu-Chao
    Wu, Chung-Lin
    Wu, Jhao-Ying
    Lin, Ming-Fa
    PHYSICAL REVIEW B, 2016, 94 (04)
  • [45] Non-covalent sp3 carbon bonding with ArCF3 is analogous to CH-π interactions
    Bauza, Antonio
    Mooibroek, Tiddo J.
    Frontera, Antonio
    CHEMICAL COMMUNICATIONS, 2014, 50 (84) : 12626 - 12629
  • [46] Effect of sp3 Content on Adhesion and Tribological Properties of Non-Hydrogenated DLC Films
    Li, Chao
    Huang, Lei
    Yuan, Juntang
    MATERIALS, 2020, 13 (08)
  • [47] Formation of Q-carbon by adjusting sp3 content in diamond-like carbon films and laser energy density of pulsed laser annealing
    Yoshinaka, Hiroki
    Inubushi, Seiko
    Wakita, Takanori
    Yokoya, Takayoshi
    Muraoka, Yuji
    CARBON, 2020, 167 : 504 - 511
  • [48] Determination of the sp3 C content of a-C films through EELS analysis in the TEM
    Galvan, D
    Pei, YT
    De Hosson, JTM
    Cavaleiro, A
    SURFACE & COATINGS TECHNOLOGY, 2005, 200 (1-4): : 739 - 743
  • [49] Determination of the sp3/sp2 ratio in tetrahedral amorphous carbon films by effective medium approximation
    Chen, ZY
    Yu, YH
    Zhao, JP
    Wang, X
    Liu, XH
    Shi, TS
    JOURNAL OF APPLIED PHYSICS, 1998, 83 (03) : 1281 - 1285
  • [50] A molecular dynamics study of the Si-nanowire@carbon-nanotube nanocomposite with sp3 interfacial bonding
    Wu, J.
    Zhang, K. W.
    Peng, X. Y.
    Li, S. M.
    Sun, L. Z.
    Zhong, J. X.
    COMPUTATIONAL MATERIALS SCIENCE, 2013, 79 : 650 - 655