Surface roughness comparison between printed parts manufactured via open source and commercial 3D printing machine

被引：0
|
作者：
Dong, Lim Guo [1 ]
bin Alkahari, Mohd Rizal [1 ,2 ]
bin Ramli, Faiz Redza [1 ,2 ]
Sudin, Mohd Nizam [1 ,2 ]
机构：
[1] Univ Teknikal Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Teknikal Malaysia Melaka UTeM, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia
来源：
PROCEEDINGS OF INNOVATIVE RESEARCH AND INDUSTRIAL DIALOGUE 2018 (IRID'18) | 2019年
关键词：
Fused deposition modeling (FDM); 3D printing; additive manufacturing (AM);
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Additive manufacturing (AM) or 3D printing has been growing as a new trend in manufacturing in the era of Industrial Revolution 4.0. However, the cost of owning a commercial and high quality 3D printer is still considerably high and not affordable to everyone. Thus, a low cost 3D printing machine has been developed in house using open source system and later was analyzed for its performance based on surface roughness. Comparison was made between the in-house developed 3D printer to the commercial 3D printer. The experiment shown that the developed 3D printer has better surface roughness printing quality approximately 17.6% superior in comparison to commercial 3D printer.
引用
收藏
页码：190 / 191
页数：2
相关论文
共 50 条
  • [1] Influence of inert gas assisted 3D printing machine on the surface roughness and strength of printed component
    Mazlan, Siti Nur Humaira
    Alkahari, Mohd Rizal
    Maidin, Nurul Ain
    Ramli, Faiz Redza
    Sudin, Mohd Nizam
    Dong, Lim Guo
    Mohamad, Imran Syakir
    [J]. PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD), 2018, : 154 - 155
  • [2] Improvement of Surface Roughness and Hydrophobicity in PETG Parts Manufactured via Fused Deposition Modeling (FDM): An Application in 3D Printed Self-Cleaning Parts
    Barrios, Juan M.
    Romero, Pablo E.
    [J]. MATERIALS, 2019, 12 (15)
  • [3] Surface Roughness Analysis of 3D Printed Parts Using Response Surface Modeling
    Biglete, Emmanuelle R.
    Manuel, Mark Christian E.
    Dela Cruz, Jennifer C.
    Verdadero, Marvin S.
    Diesta, John Michael B.
    Miralpez, Daniel Niko G.
    Javier, Ryan Angelo C.
    Picato, Jemuel Ian C.
    [J]. 2020 11TH IEEE CONTROL AND SYSTEM GRADUATE RESEARCH COLLOQUIUM (ICSGRC), 2020, : 191 - 196
  • [4] Development of a hybrid model to estimate surface roughness of 3D printed parts
    Kugunavar, Sowrabh
    Viralka, Mridul
    Sangwan, Kuldip Singh
    [J]. ADDITIVE MANUFACTURING, 2024, 92
  • [5] 3D inspection system for manufactured machine parts
    García, D
    Sebastián, JM
    Sánchez, FM
    Jiménez, LM
    González, JM
    [J]. MACHINE VISION APPLICATIONS IN INDUSTRIAL INSPECTION VII, 1999, 3652 : 250 - 260
  • [6] Evaluation of mathematical models for surface roughness prediction of PolyJet 3D printed parts
    Pandey, Praneet
    Nayak, Ankit
    Taufik, Mohammad
    [J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2024, 10 (01) : 89 - 98
  • [7] Surface Anisotropy on 3D Printed Parts
    Ficzere, Peter
    [J]. PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, 2024, 68 (03): : 272 - 277
  • [8] Design for Manufacturability (DFM) of 3D Printed Parts Fabricated Using Open Source 3D Printer
    Maidin, N. A.
    Rahman, M. H. A.
    Ahmad, M. N.
    Salahuddin, M. B. M.
    Mazlan, S. N. H.
    Wahid, M. K.
    Osman, M. H.
    Jumaidin, R.
    [J]. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2020, 12 (05): : 203 - 209
  • [9] Surface roughness investigation and prediction models for poly-jet 3D printed parts
    Kumar, G. Saravana
    Kumar, K.
    [J]. HIGH VALUE MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2014, : 9 - 14
  • [10] Development of mathematical model for surface roughness estimation in material jetting 3D printed parts
    Pandey, Praneet
    Nayak, Ankit
    Taufik, Mohammad
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023,
12345