Evaluation of mathematical models for surface roughness prediction of PolyJet 3D printed parts

被引：5
|
作者：
Pandey, Praneet [1 ]
Nayak, Ankit [2 ]
Taufik, Mohammad [1 ]
机构：
[1] Maulana Azad Natl Inst Technol, Dept Mech Engn, Bhopal, India
[2] Banasthali Vidhyapith, Sch Automat, Vanasthali, India
来源：
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES | 2024年 / 10卷 / 01期
关键词：
Additive manufacturing; 3D printing; surface roughness in PolyJet printed parts; material jetting;
D O I：
10.1080/2374068X.2022.2097416
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Additive manufacturing (AM) has seen a rapid growth in recent times, and it is also known as 3D printing. It utilises a 3D CAD model for the fabrication of a part using layer-by-layer deposition due to which the produced part has a staircase effect which causes increased surface roughness. This problem can be reduced by predicting the surface roughness values in pre-processing. In this paper, the existing prediction models to study the surface roughness quality were compared with the suggested prediction model, and the prospects for further research in this field are discussed.
引用
收藏
页码：89 / 98
页数：10
相关论文
共 50 条
  • [1] Surface roughness investigation and prediction models for poly-jet 3D printed parts
    Kumar, G. Saravana
    Kumar, K.
    [J]. HIGH VALUE MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2014, : 9 - 14
  • [2] EXPERIMENTAL INVESTIGATION OF PROCESS INDUCED EFFECTS ON SURFACE ROUGHNESS CHARACTERISTICS OF 3D PRINTED PARTS IN A POLYJET AM SETUP
    Khapper, Vishwanath
    More, Nitin
    Mohan, Ram V.
    [J]. PROCEEDINGS OF ASME 2023 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2023, VOL 4, 2023,
  • [3] Development of mathematical model for surface roughness estimation in material jetting 3D printed parts
    Pandey, Praneet
    Nayak, Ankit
    Taufik, Mohammad
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023,
  • [4] Effect of build orientation on the strength and cost of PolyJet 3D printed parts
    Das, Sai Charan
    Ranganathan, Rajesh
    Murugan, N.
    [J]. RAPID PROTOTYPING JOURNAL, 2018, 24 (05) : 832 - 839
  • [5] Surface Roughness Analysis of 3D Printed Parts Using Response Surface Modeling
    Biglete, Emmanuelle R.
    Manuel, Mark Christian E.
    Dela Cruz, Jennifer C.
    Verdadero, Marvin S.
    Diesta, John Michael B.
    Miralpez, Daniel Niko G.
    Javier, Ryan Angelo C.
    Picato, Jemuel Ian C.
    [J]. 2020 11TH IEEE CONTROL AND SYSTEM GRADUATE RESEARCH COLLOQUIUM (ICSGRC), 2020, : 191 - 196
  • [6] Development of a hybrid model to estimate surface roughness of 3D printed parts
    Kugunavar, Sowrabh
    Viralka, Mridul
    Sangwan, Kuldip Singh
    [J]. ADDITIVE MANUFACTURING, 2024, 92
  • [7] Prediction surface roughness of 3D printed parts using genetic algorithm optimized hybrid learning model
    Akgun, Gazi
    Ulkir, Osman
    [J]. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2024, 37 (07) : 2225 - 2245
  • [8] Comparative Evaluation of Surface Roughness and Hardness of 3D Printed Resins
    Al-Dulaijan, Yousif A.
    Alsulaimi, Leenah
    Alotaibi, Reema
    Alboainain, Areej
    Alalawi, Haidar
    Alshehri, Sami
    Khan, Soban Q.
    Alsaloum, Mohammed
    AlRumaih, Hamad S.
    Alhumaidan, Abdulkareem A.
    Gad, Mohammed M.
    [J]. MATERIALS, 2022, 15 (19)
  • [9] Surface Anisotropy on 3D Printed Parts
    Ficzere, Peter
    [J]. PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, 2024, 68 (03): : 272 - 277
  • [10] Surface roughness improvement of 3D printed microchannel
    Zhang, Kunpeng
    Wang, Huihui
    Yao, Kaihan
    He, Gonghan
    Zhou, Zhou
    Sun, Daoheng
    [J]. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2020, 30 (06)
12345