Influence of inert gas assisted 3D printing machine on the surface roughness and strength of printed component

被引：0

作者：

Mazlan, Siti Nur Humaira ^{[1
]}

Alkahari, Mohd Rizal ^{[1
,2
]}

Maidin, Nurul Ain ^{[3
]}

Ramli, Faiz Redza ^{[1
,2
]}

Sudin, Mohd Nizam ^{[1
,2
]}

Dong, Lim Guo ^{[1
]}

Mohamad, Imran Syakir ^{[1
,2
]}

机构：

[1] Univ Tekn Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia

[2] Univ Tekn Malaysia Melaka, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia

[3] Univ Tekn Malaysia Melaka, Fac Engn Technol, Durian Tunggal 76100, Melaka, Malaysia

来源：

PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD) | 2018年

关键词：

Fused deposition modeling (FDM); 3D printing; additive manufacturing;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The constraint of 3D printing system is its manufacturability and printed part quality in terms of surface roughness and tensile strength. In this experiment, the 3D printing processing method was discussed to study the effect of inert gas assisted 3D printing on mechanical properties and quality of 3D printed parts. Based on the experiment, it was found that through inert gas assisted 3D printing, the surface roughness and tensile strength of the 3D printed parts were improved.

引用

页码：154 / 155

页数：2

共 50 条

[1] SURFACE ROUGHNESS EFFECT ON THE 3D PRINTED BUTT JOINTS STRENGTH
Kovan, V.
Altan, G.
Topal, E. S.
Camurlu, H. E.
[J]. PROCEEDINGS OF VIII INTERNATIONAL SCIENTIFIC CONFERENCE (BALTTRIB' 2015), 2016, : 117 - 121
[2] Surface roughness comparison between printed parts manufactured via open source and commercial 3D printing machine
Dong, Lim Guo
bin Alkahari, Mohd Rizal
bin Ramli, Faiz Redza
Sudin, Mohd Nizam
[J]. PROCEEDINGS OF INNOVATIVE RESEARCH AND INDUSTRIAL DIALOGUE 2018 (IRID'18), 2019, : 190 - 191
[3] Roughness of 3D printed surface under influence of chemical post processing
Zolkaply, A. R.
Alkahari, M. R.
Ramli, F. R.
Hamdan, N. S.
Sudin, M. N.
[J]. PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2017 (MERD), 2017, : 153 - 154
[4] Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness
Ahmad, Aftab
Abbas, Ahmad
Hussain, Ghulam
Al-Abbasi, Omar
Alkahtani, Mohammed
Altaf, Khurram
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 128 (7-8): : 3627 - 3647
[5] Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness
Aftab Ahmad
Ahmad Abbas
Ghulam Hussain
Omar Al-Abbasi
Mohammed Alkahtani
Khurram Altaf
[J]. The International Journal of Advanced Manufacturing Technology, 2023, 128 : 3627 - 3647
[6] Surface roughness improvement of 3D printed microchannel
Zhang, Kunpeng
Wang, Huihui
Yao, Kaihan
He, Gonghan
Zhou, Zhou
Sun, Daoheng
[J]. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2020, 30 (06)
[7] Influence of Printing Angulation on the Flexural Strength of 3D Printed Resins: An In Vitro Study
Casucci, Alessio
Verniani, Giulia
Sami Haichal, Wissam
Manfredini, Daniele
Ferrari, Marco
Ferrari Cagidiaco, Edoardo
[J]. Applied Sciences (Switzerland), 14 (21):
[8] The Influence of Printing Parameters on Leakage and Strength of Fused Deposition Modelling 3D Printed Parts
Szczech, Marcin
Sikora, Wojciech
[J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (01) : 195 - 201
[9] Surface Roughness in Metal Material Extrusion 3D Printing: The Influence of Printing Orientation and the Development of a Predictive Model
Van, Cuong Nguyen
Hoang, Anh Le
Long, Cao Dang
Hoang, Duy Nguyen
[J]. ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2023, 13 (05) : 11672 - 11676
[10] On the Surface Roughness and Smoothing in the 3D Printed THz Reflectors
Adibelli, Sinan
Juyal, Prateek
Zajic, Alenka
[J]. 2019 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND USNC-URSI RADIO SCIENCE MEETING, 2019, : 593 - 594

← 1 2 3 4 5 →