Roughness of 3D printed surface under influence of chemical post processing

被引：0
|
作者：
Zolkaply, A. R. [1 ]
Alkahari, M. R. [1 ,2 ]
Ramli, F. R. [1 ,2 ]
Hamdan, N. S. [3 ]
Sudin, M. N. [1 ,2 ]
机构：
[1] Univ Tekn Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Tekn Malaysia Melaka, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia
[3] Univ Tekn Malaysia Melaka, Fac Engn Technol, Durian Tunggal 76100, Melaka, Malaysia
来源：
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2017 (MERD) | 2017年
关键词：
3D printing; additive manufacturing (AM); surface roughness;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Fused deposition modeling (FDM) is a popular technology in 3D printing. This is due to its capability to fabricate 3D part faster, effectively, economically and more user-friendly. However, the yield of the printed part is poor in surface finish and it produces staircase effect resulted from layer by layer deposition process. Hence, this paper studies the effect of methyl ethyl ketone (MEK) used as post-processing treatment for acrylonitrile butadiene styrene (ABS) 3D printed part. During the experiment, controlled amount of MEK was applied on 3D printed surface after printing process. This research discovers that the surface finish of 3D printed ABS can be improved significantly with the use of MEK.
引用
收藏
页码：153 / 154
页数：2
相关论文
共 50 条
  • [1] Surface roughness improvement of 3D printed microchannel
    Zhang, Kunpeng
    Wang, Huihui
    Yao, Kaihan
    He, Gonghan
    Zhou, Zhou
    Sun, Daoheng
    [J]. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2020, 30 (06)
  • [2] Surface Roughness Analysis of 3D Printed Microchannels and Processing Characteristics of Abrasive Flow Finishing
    Jian, Yongchao
    Shi, Yan
    Liu, Jia
    Huang, Cong
    Guo, Zhi
    [J]. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2022, 47 (01) : 801 - 812
  • [3] Surface Roughness Analysis of 3D Printed Microchannels and Processing Characteristics of Abrasive Flow Finishing
    Yongchao Jian
    Yan Shi
    Jia Liu
    Cong Huang
    Zhi Guo
    [J]. Arabian Journal for Science and Engineering, 2022, 47 : 801 - 812
  • [4] On the Surface Roughness and Smoothing in the 3D Printed THz Reflectors
    Adibelli, Sinan
    Juyal, Prateek
    Zajic, Alenka
    [J]. 2019 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND USNC-URSI RADIO SCIENCE MEETING, 2019, : 593 - 594
  • [5] 3D printed optics with nanometer scale surface roughness
    Nina Vaidya
    Olav Solgaard
    [J]. Microsystems & Nanoengineering, 4
  • [6] 3D printed optics with nanometer scale surface roughness
    Vaidya, Nina
    Solgaard, Olav
    [J]. MICROSYSTEMS & NANOENGINEERING, 2018, 4
  • [7] Influence of thermal treatment on surface roughness, microstructural, and mechanical properties of 3D printed ABS
    Nguyen, Khanh Q.
    Vuillaume, Pascal Y.
    Hu, Lei
    Vachon, Andro
    Diouf-Lewis, Audrey
    Marcoux, Pier-Luc
    Gagne, Lambert
    Robert, Mathieu
    Elkoun, Said
    [J]. MATERIAL FORMING, ESAFORM 2024, 2024, 41 : 201 - 209
  • [8] The influence of STL data quality on the surface roughness of 3D printed Melaka historical artifact
    Boejang, Hambali
    Lai, Low Kah
    Kudus, Syahibudil Ikhwan Abdul
    Omar, Mohammad Rafi
    Rosley, Mohd Idain Fahmy
    Mat, Shafizal
    Alkahari, Mohd Rizal
    [J]. PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2020 (MERD'20), 2020, : 47 - 48
  • [9] Influence of Thermal Processing for 3D Printed Components
    Alexandrescu, Dragos
    Antoniac, Iulian
    Olteanu, Cristian
    Anghel, Lucretia
    Sarbu, Nicolae
    Ciocoiu, Robert
    Scutariu, Mihaela Monica
    Surlari, Zinovia
    Ioanid, Nicoleta
    Stefanescu, Victorita
    [J]. MATERIALE PLASTICE, 2021, 58 (04) : 250 - 260
  • [10] Investigate the Effect of Chemical Post Processing on the Surface Roughness of Fused Deposition Modeling Printed Parts
    Abdulridha, Hind H.
    Abbas, Tahseen F.
    Bedan, Aqeel S.
    [J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (02) : 47 - 60
12345