Effect of thermal ageing on physical properties of MX80 bentonite under high-temperature conditions

被引:10
|
作者
Zeng, Zhaotian [1 ]
Shao, Jiesheng [1 ,2 ]
Sun, De'an [2 ]
Lyu, Haibo [1 ,3 ]
Xu, Yunshan [1 ,4 ]
Yang, Chenlin [1 ]
机构
[1] Guilin Univ Technol, Guangxi Key Lab Geotech Mech & Engn, Guilin 541004, Peoples R China
[2] Shanghai Univ, Dept Civil Engn, 99 Shangda Rd, Shanghai 200444, Peoples R China
[3] Hezhou Univ, Sch Architecture & Elect Engn, 18 Xihuan Rd, Hezhou 542899, Peoples R China
[4] Fujian Univ Technol, Sch Civil Engn, Fuzhou 350118, Fujian, Peoples R China
基金
中国国家自然科学基金;
关键词
MX80; bentonite; Physical properties; Thermal ageing; High-temperature conditions; Bound water; HYDROMECHANICAL BEHAVIOR; HYDRAULIC CONDUCTIVITY; COMPACTED BENTONITE; BUFFER; CLAY; PERFORMANCE; KINNEKULLE;
D O I
10.1016/j.enggeo.2022.106822
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
In a deep geological repository (DGR) system, the buffer layer is indispensable to ensuring the safe disposal of high-level radioactive nuclear waste (HLW). Because the heat generated by the decay of the spent nuclear fuel in a canister is released to the surrounding buffer layers, the bentonite buffer material experiences long-term high-temperature conditions. Therefore, the variations in physical properties of bentonite buffer material under high-temperature conditions are one of the important parameters in the DGRs for HLW. A series of tests on the specific gravity, specific surface area (SSA), Atterberg's limits, and free swelling ratio of MX80 bentonite after heating for different times at a high temperature of 200 degrees C were conducted, to investigate the influence of thermal ageing time on its physical properties. Then, the microscopic investigations, including X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), were conducted to explain the aforementioned variations from the microscopic point of view. Based on the crystal layer structure characteristics of montmorillonite, the quantitative relationships between the physical properties of bentonite and its mineral composition or bound water content were established to further explain the mechanism by which thermal ageing affects the physical properties of MX80 bentonite. The results indicate that with increasing heating time, the specific gravity, SSA, liquid limit, plastic limit, plastic index and free swelling ratio decrease sharply by 2.5%, 4.5%, 3.1%, 5.5%, 2.8% and 30.2%, respectively, within 15-30 days of heating. After 30 days of heating, their variations are negligible. Under high-temperature conditions, the transformation of mineral composition, desorption of bound water, and changes in the micro-morphology are the fundamental reasons for the variations in the physical properties of bentonite, and they influence and interact with each other.
引用
收藏
页数:11
相关论文
共 50 条
  • [41] Experimental Evaluation of the Mechanical Properties of Cement Sheath under High-Temperature Conditions
    Zou, Pei
    Huang, Zhiqiang
    Tong, Yian
    Tan, Leichuan
    Li, Rui
    Wei, Kai
    Qiao, Deng
    FDMP-FLUID DYNAMICS & MATERIALS PROCESSING, 2022, 18 (03): : 689 - 699
  • [42] Thermal and microstructural evolution under ageing of several high-temperature Ni-Mn-Ga alloys
    Santamarta, R.
    Cesari, E.
    Muntasell, J.
    Font, J.
    Pons, J.
    Ochin, P.
    INTERMETALLICS, 2010, 18 (05) : 977 - 983
  • [43] EQUATION OF STATE AND THERMAL EXPANSIVITY UNDER THE EFFECT OF HIGH-PRESSURE AND HIGH-TEMPERATURE
    KUMAR, M
    UPADHYAY, SP
    PHYSICA STATUS SOLIDI B-BASIC RESEARCH, 1994, 184 (01): : 113 - 120
  • [44] Microbial sulphide production in compacted Wyoming bentonite MX-80 under in situ conditions relevant to a repository for high-level radioactive waste
    Masurat, Peter
    Eriksson, Sara
    Pedersen, Karsten
    APPLIED CLAY SCIENCE, 2010, 47 (1-2) : 58 - 64
  • [45] Investigation of peculiarities of sealant thermal degradation under conditions of high-temperature aging modes
    Tsverava V.G.
    Rusin M.Y.
    Stepanov P.A.
    Nepovinnykh V.I.
    Khamitsaev A.S.
    Polymer Science. Series D, 2010, 3 (2) : 137 - 140
  • [46] Thermal conductivity evaluation for bentonite buffer materials under elevated temperature conditions
    Yoon, Seok
    Lee, Gi-Jun
    Park, Tae-Jin
    Lee, Changsoo
    Cho, Dong-Keun
    CASE STUDIES IN THERMAL ENGINEERING, 2022, 30
  • [47] Measured swelling, hydraulic and thermal properties of MX-80 bentonite: Distinguishing between material variability and measurement limitations
    Dixon, D. A.
    Birch, K.
    Stone, J.
    Kim, C. S.
    Barone, F.
    APPLIED CLAY SCIENCE, 2023, 241
  • [48] HIGH-TEMPERATURE THERMAL CREEP OF MATERIALS UNDER NON-STATIONARY STRESS AND OR TEMPERATURE LOADING CONDITIONS
    BOCEK, M
    HOFFMANN, M
    NUCLEAR ENGINEERING AND DESIGN-FUSION, 1985, 2 (1-2): : 29 - 52
  • [49] The study of thermal properties of high-temperature superconductors
    Liang, FY
    ACTA PHYSICA SINICA, 2002, 51 (04) : 898 - 901
  • [50] THERMAL-PROPERTIES OF HIGH-TEMPERATURE SUPERCONDUCTORS
    KAMILOV, IK
    ABDULVAGIDOV, SB
    SHAKHSHAEV, GM
    ALIEV, KK
    BATDALOV, AB
    INTERNATIONAL JOURNAL OF THERMOPHYSICS, 1995, 16 (03) : 821 - 829