Effect of thermal ageing on physical properties of MX80 bentonite under high-temperature conditions

被引:10
|
作者
Zeng, Zhaotian [1 ]
Shao, Jiesheng [1 ,2 ]
Sun, De'an [2 ]
Lyu, Haibo [1 ,3 ]
Xu, Yunshan [1 ,4 ]
Yang, Chenlin [1 ]
机构
[1] Guilin Univ Technol, Guangxi Key Lab Geotech Mech & Engn, Guilin 541004, Peoples R China
[2] Shanghai Univ, Dept Civil Engn, 99 Shangda Rd, Shanghai 200444, Peoples R China
[3] Hezhou Univ, Sch Architecture & Elect Engn, 18 Xihuan Rd, Hezhou 542899, Peoples R China
[4] Fujian Univ Technol, Sch Civil Engn, Fuzhou 350118, Fujian, Peoples R China
基金
中国国家自然科学基金;
关键词
MX80; bentonite; Physical properties; Thermal ageing; High-temperature conditions; Bound water; HYDROMECHANICAL BEHAVIOR; HYDRAULIC CONDUCTIVITY; COMPACTED BENTONITE; BUFFER; CLAY; PERFORMANCE; KINNEKULLE;
D O I
10.1016/j.enggeo.2022.106822
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
In a deep geological repository (DGR) system, the buffer layer is indispensable to ensuring the safe disposal of high-level radioactive nuclear waste (HLW). Because the heat generated by the decay of the spent nuclear fuel in a canister is released to the surrounding buffer layers, the bentonite buffer material experiences long-term high-temperature conditions. Therefore, the variations in physical properties of bentonite buffer material under high-temperature conditions are one of the important parameters in the DGRs for HLW. A series of tests on the specific gravity, specific surface area (SSA), Atterberg's limits, and free swelling ratio of MX80 bentonite after heating for different times at a high temperature of 200 degrees C were conducted, to investigate the influence of thermal ageing time on its physical properties. Then, the microscopic investigations, including X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), were conducted to explain the aforementioned variations from the microscopic point of view. Based on the crystal layer structure characteristics of montmorillonite, the quantitative relationships between the physical properties of bentonite and its mineral composition or bound water content were established to further explain the mechanism by which thermal ageing affects the physical properties of MX80 bentonite. The results indicate that with increasing heating time, the specific gravity, SSA, liquid limit, plastic limit, plastic index and free swelling ratio decrease sharply by 2.5%, 4.5%, 3.1%, 5.5%, 2.8% and 30.2%, respectively, within 15-30 days of heating. After 30 days of heating, their variations are negligible. Under high-temperature conditions, the transformation of mineral composition, desorption of bound water, and changes in the micro-morphology are the fundamental reasons for the variations in the physical properties of bentonite, and they influence and interact with each other.
引用
收藏
页数:11
相关论文
共 50 条
  • [21] Survival and activity of an indigenous iron-reducing microbial community from MX80 bentonite in high temperature / low water environments with relevance to a proposed method of nuclear waste disposal
    Gilmour, Katie A.
    Davie, Colin T.
    Gray, Neil
    SCIENCE OF THE TOTAL ENVIRONMENT, 2022, 814
  • [22] High Temperature Thermal Properties of Bentonite Foundry Sand
    Krajewski, P. K.
    Suchy, J. S.
    Piwowarski, G.
    Krajewski, W. K.
    ARCHIVES OF FOUNDRY ENGINEERING, 2015, 15 (02) : 47 - 50
  • [23] Effect of the conditions of high-temperature strain on the structure and properties of ZnS
    Anan'eva, GV
    Gorokhova, EI
    JOURNAL OF OPTICAL TECHNOLOGY, 1997, 64 (12) : 1122 - 1125
  • [24] Effect of the conditions of high-temperature strain on the structure and properties of ZnS
    Anan'eva, G.V.
    Gorokhova, E.I.
    Journal of Optical Technology (A Translation of Opticheskii Zhurnal), 1997, 64 (12): : 1122 - 1125
  • [25] Thermal conductivity of MX80 powders-granules mixture and its prediction for high-level radioactive waste repository
    Shao, Jiesheng
    Sun, Dean
    Zhou, Xiangyun
    Zeng, Zhaotian
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2024, 155
  • [26] A MACHINE FOR INVESTIGATION OF THE TRIBOTECHNICAL PROPERTIES OF MATERIALS UNDER HIGH-TEMPERATURE CONDITIONS
    MIKHIN, NM
    KRIONI, NK
    INDUSTRIAL LABORATORY, 1985, 51 (05): : 481 - 483
  • [27] HIGH-TEMPERATURE THERMAL PROPERTIES OF GERMANIUM
    SOMMELET, P
    ORR, RL
    JOURNAL OF CHEMICAL AND ENGINEERING DATA, 1966, 11 (01): : 64 - &
  • [28] NICRAL/BENTONITE THERMAL SPRAY POWDER FOR HIGH-TEMPERATURE ABRADABLE SEALS
    CLEGG, MA
    MEHTA, MH
    SURFACE & COATINGS TECHNOLOGY, 1988, 34 (01): : 69 - 77
  • [29] Thermal aging modeling of Molding Compound under High-Temperature Storage and Temperature Cycling Conditions
    Zhang, Bingbing
    Johlitz, Michael
    Lion, Alexander
    Ernst, L. J.
    Jansen, K. M. B.
    Vu, Duc-Khoi
    Weiss, Laurens
    2018 19TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2018,
  • [30] Physical properties of high-temperature sintered TaB2 under high pressure
    Zhang, Zhengang
    Liang, Hao
    Chen, Haihua
    Ding, Lanfang
    Song, Minqing
    Wang, Juwei
    CERAMICS INTERNATIONAL, 2021, 47 (07) : 9061 - 9067