Effect of thermal ageing on physical properties of MX80 bentonite under high-temperature conditions

被引:10
|
作者
Zeng, Zhaotian [1 ]
Shao, Jiesheng [1 ,2 ]
Sun, De'an [2 ]
Lyu, Haibo [1 ,3 ]
Xu, Yunshan [1 ,4 ]
Yang, Chenlin [1 ]
机构
[1] Guilin Univ Technol, Guangxi Key Lab Geotech Mech & Engn, Guilin 541004, Peoples R China
[2] Shanghai Univ, Dept Civil Engn, 99 Shangda Rd, Shanghai 200444, Peoples R China
[3] Hezhou Univ, Sch Architecture & Elect Engn, 18 Xihuan Rd, Hezhou 542899, Peoples R China
[4] Fujian Univ Technol, Sch Civil Engn, Fuzhou 350118, Fujian, Peoples R China
基金
中国国家自然科学基金;
关键词
MX80; bentonite; Physical properties; Thermal ageing; High-temperature conditions; Bound water; HYDROMECHANICAL BEHAVIOR; HYDRAULIC CONDUCTIVITY; COMPACTED BENTONITE; BUFFER; CLAY; PERFORMANCE; KINNEKULLE;
D O I
10.1016/j.enggeo.2022.106822
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
In a deep geological repository (DGR) system, the buffer layer is indispensable to ensuring the safe disposal of high-level radioactive nuclear waste (HLW). Because the heat generated by the decay of the spent nuclear fuel in a canister is released to the surrounding buffer layers, the bentonite buffer material experiences long-term high-temperature conditions. Therefore, the variations in physical properties of bentonite buffer material under high-temperature conditions are one of the important parameters in the DGRs for HLW. A series of tests on the specific gravity, specific surface area (SSA), Atterberg's limits, and free swelling ratio of MX80 bentonite after heating for different times at a high temperature of 200 degrees C were conducted, to investigate the influence of thermal ageing time on its physical properties. Then, the microscopic investigations, including X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), were conducted to explain the aforementioned variations from the microscopic point of view. Based on the crystal layer structure characteristics of montmorillonite, the quantitative relationships between the physical properties of bentonite and its mineral composition or bound water content were established to further explain the mechanism by which thermal ageing affects the physical properties of MX80 bentonite. The results indicate that with increasing heating time, the specific gravity, SSA, liquid limit, plastic limit, plastic index and free swelling ratio decrease sharply by 2.5%, 4.5%, 3.1%, 5.5%, 2.8% and 30.2%, respectively, within 15-30 days of heating. After 30 days of heating, their variations are negligible. Under high-temperature conditions, the transformation of mineral composition, desorption of bound water, and changes in the micro-morphology are the fundamental reasons for the variations in the physical properties of bentonite, and they influence and interact with each other.
引用
收藏
页数:11
相关论文
共 50 条
  • [31] PHYSICAL BEHAVIOR OF THERMAL BARRIERS IN HIGH-TEMPERATURE GAS-COOLED REACTOR CONDITIONS
    QUILLICO, JJ
    DESPRESLES, PJ
    NUCLEAR TECHNOLOGY, 1984, 66 (03) : 523 - 533
  • [32] Effect of high-temperature treatment on the physical and mechanical properties of titanium alloys
    A. Ya. Shinyaev
    É. I. Illarionov
    Metal Science and Heat Treatment, 2000, 42 : 37 - 41
  • [33] Effect of high-temperature treatment on the physical and mechanical properties of titanium alloys
    Shinyaev, AY
    Illarionov, ÉI
    METAL SCIENCE AND HEAT TREATMENT, 2000, 42 (1-2) : 37 - 41
  • [34] Measurements of thermal properties of rock samples under high temperature conditions
    Lin, Weiren
    Tadai, Osamu
    Sugimoto, Tatsuhiro
    Hirose, Takehiro
    Tanikawa, Wataru
    Hamada, Yohei
    GEOMECHANICS AND GEODYNAMICS OF ROCK MASSES, 2018, : 219 - 223
  • [35] Measurements of thermal properties of rock samples under high temperature conditions
    Lin, Weiren
    Tadai, Osamu
    Sugimoto, Tatsuhiro
    Hirose, Takehiro
    Tanikawa, Wataru
    Hamada, Yohei
    GEOMECHANICS AND GEODYNAMICS OF ROCK MASSES (EUROCK2018), VOLS 1 AND 2, 2018, : 307 - 311
  • [37] Effect of the additives on thermal properties of high-temperature honeycomb ceramic regenerator
    Huang, XH
    Xue, HL
    Shang, FL
    ENERGY AND ENVIRONMENT, VOLS 1 AND 2, 2003, : 989 - 993
  • [38] Effect of high-temperature thermal hydrolysis on rheological properties and dewaterability of sludge
    Cao, Xiuqin
    Pan, Yahong
    Jiang, Kun
    Zhu, Kaijin
    Ren, Xiaoli
    ENVIRONMENTAL TECHNOLOGY, 2021, 42 (23) : 3707 - 3715
  • [39] Mechanical properties of sandstone under in-situ high-temperature and confinement conditions
    Liyuan Liu
    Juan Jin
    Jiandong Liu
    Wei Cheng
    Minghui Zhao
    Shengwen Luo
    Yifan Luo
    Tao Wang
    International Journal of Minerals,Metallurgy and Materials, 2025, (04) : 778 - 787
  • [40] Mechanical properties of sandstone under in-situ high-temperature and confinement conditions
    Liu, Liyuan
    Jin, Juan
    Liu, Jiandong
    Cheng, Wei
    Zhao, Minghui
    Luo, Shengwen
    Luo, Yifan
    Wang, Tao
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2025, 32 (04) : 778 - 787