Wear Rate of Natural Fibre: Long Kenaf Composite

被引：29
|
作者：
Nordin, Nor Amalina [1 ]
Yussof, Fauziah Md [1 ]
Kasolang, Salmiah [1 ]
Salleh, Zuraidah [1 ]
Ahmad, Mohamad Ali [1 ]
机构：
[1] Univ Teknol MARA, Fac Mech Engn, Shah Alam 40450, Selangor, Malaysia
来源：
INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013 | 2013年 / 68卷
关键词：
Abrasive wear; Dry Sliding; Epoxy composite; Polyester composite; DRY SLIDING WEAR; MECHANICAL-PROPERTIES; EPOXY COMPOSITES; OIL; REINFORCEMENT; BEHAVIOR;
D O I：
10.1016/j.proeng.2013.12.160
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an experimental investigation on the specific wear rate between Kenaf Polyester Composite (KPEC) and Kenaf Epoxy Composite (KEC). The raw material used in the present work was long kenaf fiber. The epoxy resin and unsaturated polyester were mixed with hardener at weight ratios of 3:1 and 10:1, respectively. The wear test was carried out using an Abrasion Resistance Tester (TR-600) in dry sliding conditions at a constant velocity of 1.4 m/s. The test was conducted at room temperature with different applied loads ranging from 5 and 30N. It was observed that the wear characteristic of KPEC is comparative to KEC composite material. Both sample materials tested exhibited the same amount of specific wear rate at the certain distance. (C) 2013 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：145 / 151
页数：7
相关论文
共 50 条
  • [41] Hybridization of woven kenaf and unidirectional glass fibre roving for unsaturated polyester composite
    Balakrishnan, Thinesh Sharma
    Sultan, Mohamed Thariq Hameed
    Shahar, Farah Syazwani
    Nayak, Suhas Yeshwant
    Shah, Ain Umaira Md
    Sebaey, Tamer Ali
    Basri, Adi Azriff
    IRANIAN POLYMER JOURNAL, 2024, 33 (09) : 1231 - 1244
  • [42] Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre
    Anuar, H.
    Zuraida, A.
    COMPOSITES PART B-ENGINEERING, 2011, 42 (03) : 462 - 465
  • [43] MECHANICAL PROPERTIES OF SHORT AND CONTINUOUS KENAF/PET FIBRE REINFORCED POLYOXYMETHYLENE COMPOSITE
    Dan-Mallam, Yakubu
    Abdullah, Mohamad Zaki
    Yusoff, Puteri Sri Melor Megat
    ADVANCED COMPOSITES LETTERS, 2015, 24 (04) : 81 - 91
  • [44] Pultruded Kenaf Fibre Reinforced Composites: Effect of Different Kenaf Fibre Yarn Tex
    Zamri, Mohd Hafiz
    Akil, Hazizan Md
    MohdIshak, Zainal Ariffin
    5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP), 2016, 19 : 577 - 585
  • [45] EFFECT OF FIBRE TREATMENT ON LONGITUDINAL AND TRANSVERSE TENSILE PROPERTIES OF UNIDIRECTIONAL KENAF COMPOSITE
    Manap, Norhashidah
    Jumahat, Aidah
    Sapiai, Napisah
    JURNAL TEKNOLOGI, 2015, 76 (11): : 87 - 95
  • [46] Compressive behaviour of natural fibre composite
    Wȩclawski, Bartosz T.
    Fan, Mizi
    Hui, David
    Composites Part B: Engineering, 2014, 67 : 183 - 191
  • [47] Compressive behaviour of natural fibre composite
    Weclawski, Bartosz T.
    Fan, Mizi
    Hui, David
    COMPOSITES PART B-ENGINEERING, 2014, 67 : 183 - 191
  • [48] Implementing Neural Network for Damage Severity Identification of Natural Kenaf Fibre Composites
    Zaleha, M.
    Mahzan, S.
    Izwana, I. Maizlinda
    Advances in Mechanical and Manufacturing Engineering, 2014, 564 : 189 - 193
  • [49] Characterization of Mechanical Properties on Natural Fibre Reinforced Polymer using Kenaf and Polyurethane
    Isa, M. R.
    Suhaimi, A. B.
    Zaroog, O. S.
    Zahari, N. M.
    Sulaiman, S. N.
    Ismail, I. N.
    Mohamed, H.
    5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
  • [50] Influence of particle size, applied load, and fibre orientation on 3B-A wear and frictional behaviour of epoxy composite based on kenaf fibres
    Chin, C. W.
    Yousif, F.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2010, 224 (J5) : 481 - 489
12345