Wear Rate of Natural Fibre: Long Kenaf Composite

被引：29
|
作者：
Nordin, Nor Amalina [1 ]
Yussof, Fauziah Md [1 ]
Kasolang, Salmiah [1 ]
Salleh, Zuraidah [1 ]
Ahmad, Mohamad Ali [1 ]
机构：
[1] Univ Teknol MARA, Fac Mech Engn, Shah Alam 40450, Selangor, Malaysia
来源：
INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013 | 2013年 / 68卷
关键词：
Abrasive wear; Dry Sliding; Epoxy composite; Polyester composite; DRY SLIDING WEAR; MECHANICAL-PROPERTIES; EPOXY COMPOSITES; OIL; REINFORCEMENT; BEHAVIOR;
D O I：
10.1016/j.proeng.2013.12.160
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an experimental investigation on the specific wear rate between Kenaf Polyester Composite (KPEC) and Kenaf Epoxy Composite (KEC). The raw material used in the present work was long kenaf fiber. The epoxy resin and unsaturated polyester were mixed with hardener at weight ratios of 3:1 and 10:1, respectively. The wear test was carried out using an Abrasion Resistance Tester (TR-600) in dry sliding conditions at a constant velocity of 1.4 m/s. The test was conducted at room temperature with different applied loads ranging from 5 and 30N. It was observed that the wear characteristic of KPEC is comparative to KEC composite material. Both sample materials tested exhibited the same amount of specific wear rate at the certain distance. (C) 2013 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：145 / 151
页数：7
相关论文
共 50 条
  • [21] The influence of addition of treated kenaf fibre in the production and properties of fibre reinforced foamed composite
    Mahzabin, Sadia
    Hock, Lim Jee
    Hossain, Md Shabbir
    Kang, Lim Siong
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 178 : 518 - 528
  • [22] Specific Wear Rate of Kenaf Epoxy Composite and Oil Palm Empty Fruit Bunch (OPEFB) Epoxy Composite in Dry Sliding
    Kasolang, Salmiah
    Ahmad, Mohamad Ali
    Abu Bakar, Mimi Azlina
    Hamid, Ahmad Hussein Abdul
    JURNAL TEKNOLOGI, 2012, 58
  • [23] Study of the effect of surface treatment of kenaf fibre on mechanical properties of kenaf filled unsaturated polyester composite
    Salem, I. A. S.
    Rozyanty, A. R.
    Betar, B. O.
    Adam, T.
    Mohammed, M.
    Mohammed, A. M.
    INTERNATIONAL CONFERENCE ON APPLICATIONS AND DESIGN IN MECHANICAL ENGINEERING (ICADME 2017), 2017, 908
  • [24] Mechanical separation of kenaf for composite applications - Evaluation of the total fibre line concept for field retted kenaf
    Muessig, J.
    Enke, S.
    Gusovius, H.
    Luehr, C.
    Uhrlaub, B.
    Dammer, L.
    Carus, M.
    INDUSTRIAL CROPS AND PRODUCTS, 2024, 208
  • [25] The Effects of Untreated and Treated Kenaf Loading on the Properties of Kenaf Fibre-Filled Natural Rubber Compounds
    Ismail, H.
    Norjulia, A. M.
    Ahmad, Z.
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2010, 49 (05) : 519 - 524
  • [26] Performance characteristics of treated kenaf bast fibre reinforced cement composite
    Amiandamhen S.O.
    Izekor D.N.
    Balogun A.O.
    Journal of the Indian Academy of Wood Science, 2016, 13 (2) : 156 - 160
  • [27] Tensile properties of a hybrid kenaf-glass fibre composite shaft
    Zakaria N.A.
    Ishak M.R.
    Mustapha F.
    Yidris N.
    Materials Today: Proceedings, 2023, 74 : 492 - 498
  • [28] Rheological behaviour of polypropylene/kenaf fibre/wood flour hybrid composite
    Ghasemi, Ismaeil
    Azizi, Hamed
    Naeimian, Navid
    IRANIAN POLYMER JOURNAL, 2008, 17 (03) : 191 - 198
  • [29] Investigation into mechanical & tribological performance of kenaf fibre particle reinforced composite
    Devadas, Alvin
    Nirmal, Umar
    Hossen, J.
    COGENT ENGINEERING, 2018, 5 (01): : 1 - 23
  • [30] The effect of processing parameters on the mechanical properties of kenaf fibre plastic composite
    Bernard, M.
    Khalina, A.
    Ali, Aidy
    Janius, R.
    Faizal, M.
    Hasnah, K. S.
    Sanuddin, A. B.
    MATERIALS & DESIGN, 2011, 32 (02) : 1039 - 1043
12345