Wear Rate of Natural Fibre: Long Kenaf Composite

被引：29

作者：

Nordin, Nor Amalina ^{[1
]}

Yussof, Fauziah Md ^{[1
]}

Kasolang, Salmiah ^{[1
]}

Salleh, Zuraidah ^{[1
]}

Ahmad, Mohamad Ali ^{[1
]}

机构：

[1] Univ Teknol MARA, Fac Mech Engn, Shah Alam 40450, Selangor, Malaysia

来源：

INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013 | 2013年 / 68卷

关键词：

Abrasive wear; Dry Sliding; Epoxy composite; Polyester composite; DRY SLIDING WEAR; MECHANICAL-PROPERTIES; EPOXY COMPOSITES; OIL; REINFORCEMENT; BEHAVIOR;

D O I：

10.1016/j.proeng.2013.12.160

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents an experimental investigation on the specific wear rate between Kenaf Polyester Composite (KPEC) and Kenaf Epoxy Composite (KEC). The raw material used in the present work was long kenaf fiber. The epoxy resin and unsaturated polyester were mixed with hardener at weight ratios of 3:1 and 10:1, respectively. The wear test was carried out using an Abrasion Resistance Tester (TR-600) in dry sliding conditions at a constant velocity of 1.4 m/s. The test was conducted at room temperature with different applied loads ranging from 5 and 30N. It was observed that the wear characteristic of KPEC is comparative to KEC composite material. Both sample materials tested exhibited the same amount of specific wear rate at the certain distance. (C) 2013 The Authors. Published by Elsevier Ltd.

引用

页码：145 / 151

页数：7

共 50 条

[31] The Mechanical Properties of Treated and Untreated Kenaf Fibre Reinforced Epoxy Composite
Abu Bakar, M. A.
Ahmad, S.
Kuntjoro, W.
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY, 2010, 4 (02) : 159 - 163
[32] Influence of weathering effect in natural environment on thermal properties hybrid kenaf blast/glass fibre and unsaturated polyester composite
Mohammed, M.
Rozyanty, A. R.
Beta, B. O.
Adam, T.
Osman, A. F.
Salem, I. A. S.
Dahham, O. S.
Al-Samarrai, M. N.
Mohammed, A. M.
INTERNATIONAL CONFERENCE ON APPLICATIONS AND DESIGN IN MECHANICAL ENGINEERING (ICADME 2017), 2017, 908
[33] Study of the Weathering Effect in a Natural Environment on the Hybrid Kenaf Bast /Glass Fibre-Filled Unsaturated Polyester Composite
Mohammed, Mohammed
Rozyanty, A. R.
Adam, Tijjani
Betar, Bashir O.
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
[34] Wave velocity characteristic for Kenaf natural fibre under impact damage
Zaleha, M.
Mahzan, S.
Fitri, Muhamad
Kamarudin, K. A.
Eliza, Y.
Tobi, A. L. Mohd
COLLOQUIUM OF ADVANCED MECHANICS (CAMS2016), 2017, 165
[35] Effect of Fibre Size and Fibre Loading on Tensile Properties of Hybridized Kenaf/PALF Reinforced HDPE Composite
Aji, I. S.
Zainudin, E. S.
Khalina, A.
Sapuan, S. M.
COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 471-472 : 680 - +
[36] Effect of fibre loading on tensile strength of kenaf/glass fibre epoxy hybrid composite for insulator application
Vinoth, K. S.
Ansari, M. N. M.
Begum, Shahida
Yahya, Zainudin
Atiqah, A.
MATERIALS TODAY-PROCEEDINGS, 2020, 29 : 123 - 126
[37] THE EFFECT OF KENAF FIBRE LOADING ON CURING CHARACTERISTICS AND MECHANICAL PROPERTIES OF WASTE TYRE DUST/KENAF FIBRE HYBRID FILLER FILLED NATURAL RUBBER COMPOUNDS
Ismail, Hanafi
Omar, Nurul Farhana
Othman, Nadras
BIORESOURCES, 2011, 6 (04): : 3742 - 3756
[38] Flexural properties of jute/kenaf/glass fibre reinforced nano-composite
Sathish T.
Saravanan R.
Arunachalam S.J.
Parthiban A.
Interactions, 2024, 245 (01)
[39] The Effects of Laminate Orientation in Resin Infused Kenaf Fibre Reinforced Epoxy Composite
Tshai, K. Y.
Wong, K. C.
Tan, W. J.
Chai, A. B.
ADVANCED DEVELOPMENT IN INDUSTRY AND APPLIED MECHANICS, 2014, 627 : 24 - 28
[40] Elastic anisotropy of kenaf fibre and micromechanical modeling of nonwoven kenaf fibre/epoxy composites
Andre, N. G.
Ariawan, Dody
Ishak, Z. A. Mohd
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2016, 35 (19) : 1424 - 1433

← 1 2 3 4 5 →