Wear Rate of Natural Fibre: Long Kenaf Composite

被引：29
|
作者：
Nordin, Nor Amalina [1 ]
Yussof, Fauziah Md [1 ]
Kasolang, Salmiah [1 ]
Salleh, Zuraidah [1 ]
Ahmad, Mohamad Ali [1 ]
机构：
[1] Univ Teknol MARA, Fac Mech Engn, Shah Alam 40450, Selangor, Malaysia
来源：
INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013 | 2013年 / 68卷
关键词：
Abrasive wear; Dry Sliding; Epoxy composite; Polyester composite; DRY SLIDING WEAR; MECHANICAL-PROPERTIES; EPOXY COMPOSITES; OIL; REINFORCEMENT; BEHAVIOR;
D O I：
10.1016/j.proeng.2013.12.160
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an experimental investigation on the specific wear rate between Kenaf Polyester Composite (KPEC) and Kenaf Epoxy Composite (KEC). The raw material used in the present work was long kenaf fiber. The epoxy resin and unsaturated polyester were mixed with hardener at weight ratios of 3:1 and 10:1, respectively. The wear test was carried out using an Abrasion Resistance Tester (TR-600) in dry sliding conditions at a constant velocity of 1.4 m/s. The test was conducted at room temperature with different applied loads ranging from 5 and 30N. It was observed that the wear characteristic of KPEC is comparative to KEC composite material. Both sample materials tested exhibited the same amount of specific wear rate at the certain distance. (C) 2013 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：145 / 151
页数：7
相关论文
共 50 条
  • [1] Abrasive wear rate on natural fibre composite
    Abu Bakar, M. A.
    Ahmad, M. A.
    Kasolang, S.
    Roseley, N. R. Nik
    Masdek, N. R. Nik Mohd
    PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015, 2015, : 148 - 149
  • [2] Wear Properties of Natural Fibre Composite Materials
    Abhemanyu, P. C.
    Prassanth, E.
    Kumar, T. Navin
    Vidhyasagar, R.
    Marimuthu, K. Prakash
    EMERGING TRENDS IN MECHANICAL ENGINEERING 2018, 2019, 2080
  • [3] Behaviour of kenaf fibre reinforced composite
    Mahzabin, Mst Sadia
    Hock, Lim Jee
    Kang, Lim Siong
    Jarghouyeh, Ehsan Nikbakht
    10TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE 2018, 2019, 513
  • [4] Effect of geometry on crashworthiness parameters of natural kenaf fibre reinforced composite hexagonal tubes
    Alkbir, M. F. M.
    Sapuan, S. M.
    Nuraini, A. A.
    Ishak, M. R.
    MATERIALS & DESIGN, 2014, 60 : 85 - 93
  • [5] Rheological Behaviour of Polypropylene/Kenaf Fibre Composite: Effect of Fibre Size
    Khalina, A.
    Zainuddin, E. S.
    Aji, I. S.
    COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 471-472 : 513 - +
  • [6] Flexural and tensile behaviour of kenaf fibre composite materials
    Abdi, B.
    Azwan, S.
    Abdullah, M. R.
    Ayob, A.
    MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 184 - 186
  • [7] Properties of Kenaf Fibre Reinforced Natural Rubber Composites
    Raju, Gunasunderi
    Said, Ma'zam Md
    Ahmad, Md Aris
    JOURNAL OF RUBBER RESEARCH, 2008, 11 (04) : 187 - 195
  • [8] A Study on Deformation Micromechanics of Kenaf Fibre and Kenaf/Epoxy Composite using Raman Spectroscopy
    Sarkawi, Siti Salina
    Eichhorn, S. J.
    JOURNAL OF RUBBER RESEARCH, 2010, 13 (01) : 59 - 72
  • [9] The investigation of fibre orientation effect in crashworthiness of kenaf and hybrid kenaf/glass fiber composite
    Ismail, Al Emran
    Sahrom, Muhammad Fadhil
    Ariffin, Ahmad Hamdan
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2020 (MERD'20), 2020, : 327 - 329
  • [10] Adhesive wear of thermoplastic composite based on kenaf fibres
    Narish, S.
    Yousif, B. F.
    Rilling, D.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2011, 225 (J2) : 101 - 109
12345