INVESTIGATION OF THE USABILITY OF CUBIC BORON NITRIDE CUTTING TOOLS AS AN ALTERNATIVE TO DIAMOND CUTTING TOOLS

被引：6

作者：

Islak, S. ^{[1
]}

Kir, D. ^{[2
]}

Celik, H. ^{[3
]}

机构：

[1] Kastamonu Univ, Fac Engn & Architecture, Dept Mat Sci & Nanotechnol Engn, TR-37000 Kastamonu, Turkey

[2] Kocaeli Univ, Hereke Vocat High Sch, TR-41400 Kocaeli, Turkey

[3] Firat Univ, Fac Technol, Dept Met & Mat Engn, TR-23100 Elazig, Turkey

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2013年 / 58卷 / 04期

关键词：

cBN cutting tools; hot-pressing technique; wear; CBN; WEAR;

D O I：

10.2478/amm-2013-0135

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Diamond and cubic boron nitride (cBN) cutting segments were produced using hot pressing technique for this study to be used in cutting natural stone. cBN grains were added to bronze powder, the chosen matrix, at a rate of 0%, 20%, 40%, 60%, 80%, and 100% (according to percentage by weight). Segments were produced under a pressure of 35 MPa, at a sintering temperature of 600 degrees C, over a sintering time of 3 minutes. The cutting properties of the produced segments were determined by cutting Ankara andesite. A Scanning Electron Microscope (SEM) and an X-Ray Diffractometer (XRD) were used to analyse the microstructure, phase compound, and wear surfaces of each segment type.

引用

页码：1119 / 1123

页数：5

共 50 条

[31] Research on the cutting performance of carbon nitride cutting tools
Zheng, XH
Yu, QX
Lin, J
Lu, M
Pang, SQ
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 129 (1-3) : 157 - 160
[32] Wear patterns of polycrystalline cubic boron nitride cutting tools when machining hardened bearing steel
Benga, Gabriel
Stanimir, Alexandru
ANNALS OF DAAAM FOR 2007 & PROCEEDINGS OF THE 18TH INTERNATIONAL DAAAM SYMPOSIUM: INTELLIGENT MANUFACTURING & AUTOMATION: FOCUS ON CREATIVITY, RESPONSIBILITY, AND ETHICS OF ENGINEERS, 2007, : 73 - 74
[33] Cutting performance of cubic boron nitride-coated tools in dry turning of hardened ductile iron
Tu, Luqiang
Tian, Shuai
Xu, Feng
Wang, Xue
Xu, Chenhui
He, Bin
Zuo, Dunwen
Zhang, Wenjun
JOURNAL OF MANUFACTURING PROCESSES, 2020, 56 (56) : 158 - 168
[34] Mechanical and tribological performance of Ni-Co-based binders for cubic boron nitride cutting tools
Miranda, G.
Guimaraes, B.
Pereira, D.
Buciumeanu, M.
Cabral, A.
Fredel, M.
Silva, F. S.
Henriques, B.
JOURNAL OF COMPOSITE MATERIALS, 2020, 54 (20) : 2753 - 2760
[35] Wear on cubic boron nitride tools
Klimenko, S.A.
Mukovoz, Yu.A.
Lyashko, V.A.
Ogorodnik, V.V.
Vashchenko, A.N.
Soviet journal of superhard materials, 1988, 10 (02): : 53 - 57
[36] CVD diamond coated cutting tools
Sjöstrand, ME
Reineck, I
Hilding, T
Tenerz, H
ADVANCES IN HARD MATERIALS PRODUCTION, 1996, : 377 - 385
[37] Diamond planing of coated cutting tools
Ya. I. Barats
D. A. Tikhonov
Russian Engineering Research, 2008, 28 (3) : 275 - 276
[38] Defect characterization in the diamond cutting tools
Zeren, Muzaffer
Karagoz, Sadi
MATERIALS CHARACTERIZATION, 2006, 57 (02) : 111 - 114
[39] Sintering of polycrystalline diamond cutting tools
Zeren, Muzaffer
Karagoz, Sadi
MATERIALS & DESIGN, 2007, 28 (03) : 1055 - 1058
[40] The microstructural design of diamond cutting tools
Karagöz, A
Zeren, M
MATERIALS CHARACTERIZATION, 2001, 47 (02) : 89 - 91

← 1 2 3 4 5 →