INVESTIGATION OF THE USABILITY OF CUBIC BORON NITRIDE CUTTING TOOLS AS AN ALTERNATIVE TO DIAMOND CUTTING TOOLS

被引：6

作者：

Islak, S. ^{[1
]}

Kir, D. ^{[2
]}

Celik, H. ^{[3
]}

机构：

[1] Kastamonu Univ, Fac Engn & Architecture, Dept Mat Sci & Nanotechnol Engn, TR-37000 Kastamonu, Turkey

[2] Kocaeli Univ, Hereke Vocat High Sch, TR-41400 Kocaeli, Turkey

[3] Firat Univ, Fac Technol, Dept Met & Mat Engn, TR-23100 Elazig, Turkey

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2013年 / 58卷 / 04期

关键词：

cBN cutting tools; hot-pressing technique; wear; CBN; WEAR;

D O I：

10.2478/amm-2013-0135

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Diamond and cubic boron nitride (cBN) cutting segments were produced using hot pressing technique for this study to be used in cutting natural stone. cBN grains were added to bronze powder, the chosen matrix, at a rate of 0%, 20%, 40%, 60%, 80%, and 100% (according to percentage by weight). Segments were produced under a pressure of 35 MPa, at a sintering temperature of 600 degrees C, over a sintering time of 3 minutes. The cutting properties of the produced segments were determined by cutting Ankara andesite. A Scanning Electron Microscope (SEM) and an X-Ray Diffractometer (XRD) were used to analyse the microstructure, phase compound, and wear surfaces of each segment type.

引用

页码：1119 / 1123

页数：5

共 50 条

[21] A Study of the Influence of Cutting Parameters on Micro Milling of Steel with Cubic Boron Nitride (CBN) Tools
Klocke, Fritz
Quito, Fernando
Arntz, Kristian
Souza, Alexandre
MICROMACHINING AND MICROFABRICATION PROCESS TECHNOLOGY XIV, 2009, 7204
[22] Special features of the applications of cutting tools from polycrystalline cubic boron nitride with protective coatings
S. A. Klimenko
S. An. Klimenko
A. S. Manokhin
V. M. Beresnev
Journal of Superhard Materials, 2017, 39 : 288 - 297
[23] Diamond and Cubic Boron Nitride Tools for Machining Metals.
Weiland, W.
1978, 68 (02): : 61 - 65
[24] Evaluation of Silicon Nitride Ceramic Cutting Tools With Diamond Coatings
Lanna, M. A.
Abrao, A. M.
Levy Neto, F.
Santos, C.
da Silva, C. R. M.
ADVANCED POWDER TECHNOLOGY VI, 2008, 591-593 : 537 - +
[25] SINTERED DIAMOND CUTTING TOOLS
不详
INDUSTRIAL ENGINEERING, 1974, 6 (10): : 42 - 43
[26] Electronmetallography of diamond cutting tools
Karagöz, S
Zeren, M
INDUSTRIAL DIAMOND REVIEW, 2003, (01): : 40 - 41
[27] Electronmetallography of diamond cutting tools
Karagöz, S.
Zeren, M.
Industrial Diamond Review, 2003, 63 (596): : 40 - 41
[28] Diamond deposition on cutting tools
Lux, B
Haubner, R
CERAMICS INTERNATIONAL, 1996, 22 (04) : 347 - 351
[29] Diamond coated cutting tools
Reineck, I
Sjostrand, ME
Karner, J
Pedrazzini, M
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 1996, 14 (1-3): : 187 - 193
[30] PCBN and diamond cutting tools
Harada, Takashi
Okamura, Katsumi
Kukino, Satoru
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2020, 86 (11): : 844 - 847

← 1 2 3 4 5 →