INVESTIGATION OF THE USABILITY OF CUBIC BORON NITRIDE CUTTING TOOLS AS AN ALTERNATIVE TO DIAMOND CUTTING TOOLS

被引：6

作者：

Islak, S. ^{[1
]}

Kir, D. ^{[2
]}

Celik, H. ^{[3
]}

机构：

[1] Kastamonu Univ, Fac Engn & Architecture, Dept Mat Sci & Nanotechnol Engn, TR-37000 Kastamonu, Turkey

[2] Kocaeli Univ, Hereke Vocat High Sch, TR-41400 Kocaeli, Turkey

[3] Firat Univ, Fac Technol, Dept Met & Mat Engn, TR-23100 Elazig, Turkey

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2013年 / 58卷 / 04期

关键词：

cBN cutting tools; hot-pressing technique; wear; CBN; WEAR;

D O I：

10.2478/amm-2013-0135

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Diamond and cubic boron nitride (cBN) cutting segments were produced using hot pressing technique for this study to be used in cutting natural stone. cBN grains were added to bronze powder, the chosen matrix, at a rate of 0%, 20%, 40%, 60%, 80%, and 100% (according to percentage by weight). Segments were produced under a pressure of 35 MPa, at a sintering temperature of 600 degrees C, over a sintering time of 3 minutes. The cutting properties of the produced segments were determined by cutting Ankara andesite. A Scanning Electron Microscope (SEM) and an X-Ray Diffractometer (XRD) were used to analyse the microstructure, phase compound, and wear surfaces of each segment type.

引用

页码：1119 / 1123

页数：5

共 50 条

[1] Research on the Cutting Performance of Cubic Boron Nitride Tools
ZHENG Xiao-hua 1
2. School of Mechanical Engineering
厦门大学学报(自然科学版), 2002, (S1) : 3 - 4
[2] POLYCRYSTALLINE DIAMOND AND BORON-NITRIDE CUTTING TOOLS
SCHWAIGHOFER, RP
KALIN, A
LEDERMANN, P
METZGER, JL
F&M-FEINWERKTECHNIK & MESSTECHNIK, 1985, 93 (06): : S79 - &
[3] POLYCRYSTALLINE DIAMOND AND BORON NITRIDE CUTTING TOOLS.
Schwaighofer, R.P.
Kaelin, A.
Ledermann, P.
Metzger, J.L.
IPE International, Industrial & Production Engineering, 1985, 9 (02):
[4] CUTTING PERFORMANCE OF CERMET, CERAMIC, CUBIC BORON-NITRIDE, AND SINTERED DIAMOND TOOLS .3. CUTTING PERFORMANCE OF CERAMIC TOOLS
TANAKA, C
DATE, H
NAKAO, T
TAKAHASHI, A
MOKUZAI GAKKAISHI, 1988, 34 (04): : 298 - 304
[5] Mechanism study on the wear of polycrystalline cubic boron nitride cutting tools
Jia Yunhai
Li Jiangang
FOURTH INTERNATIONAL SEMINAR ON MODERN CUTTING AND MEASUREMENT ENGINEERING, 2011, 7997
[6] ON THE WEAR MECHANISM OF CUBIC BORON-NITRIDE BASE CUTTING TOOLS
KLIMENKO, SA
MUKOVOZ, YA
LYASHKO, VA
VASHCHENKO, AN
OGORODNIK, VV
WEAR, 1992, 157 (01) : 1 - 7
[7] Machinability of pearlitic cast iron with Cubic Boron Nitride (CBN) cutting tools
Liu, JC
Yamazaki, K
Ueda, H
Narutaki, N
Yamane, Y
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2002, 124 (04): : 820 - 832
[8] Temperature evaluation of cutting tools during machining of hardened bearing steel using polycrystalline cubic boron nitride and ceramic cutting tools
Abrao, A. M.
Aspinwall, D. K.
Materials Science and Technology, 13 (05):
[9] Temperature evaluation of cutting tools during machining of hardened bearing steel using polycrystalline cubic boron nitride and ceramic cutting tools
Abrao, AM
Aspinwall, DK
MATERIALS SCIENCE AND TECHNOLOGY, 1997, 13 (05) : 445 - 450
[10] SURFACE ROUGHNESS AND CUTTING FORCES IN TURNING OF TOOL STEEL WITH MIXED CERAMIC AND CUBIC BORON NITRIDE CUTTING TOOLS
Yalcin, Bekir
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2015, 39 (02) : 323 - 336

← 1 2 3 4 5 →