Characterization of porous silicon nitride ceramics by pressureless sintering using fly ash cenosphere as a pore-forming agent

被引：57
|
作者：
Shao, Yingfeng [1 ]
Jia, Dechang [1 ]
Liu, Boyang [1 ]
机构：
[1] Harbin Inst Technol, Inst Adv Ceram, Harbin 150001, Peoples R China
来源：
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2009年 / 29卷 / 08期
基金：
中国国家自然科学基金;
关键词：
Sintering; Porosity; Mechanical properties; Si3N4; FABRICATION; STRENGTH; POROSITY;
D O I：
10.1016/j.jeurceramsoc.2008.09.012
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A new method for fabricating porous silicon nitride ceramics has been developed by using fly ash cenosphere (FAC) with mean diameter of 87 mu m as a pore-forming agent. Sintering was carried out at 1780 degrees C for 2 It under a nitrogen atmosphere. FAC can also act as a sintering aid besides a pore-forming agent. X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies showed that YSiO2N forms instead of Y2Si3O3N4 when FAC is incorporated. Microstructural analysis revealed that large spherical cavities are scattered in a relative dense matrix. Porous Si3N4 ceramics with density of 2.17-2.30g/cm(3), Young's modulus of 141-150 GPa and strength of 180-320 MPa were obtained by changing the FAC content. (c) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1529 / 1534
页数：6
相关论文
共 50 条
  • [21] Biotemplated fabrication of porous alumina ceramics with controllable pore size using bioactive yeast as pore-forming agent
    Xu, Guogang
    Li, Jian
    Cui, Hongzhi
    He, Qingkun
    Zhang, Zhihui
    Zhan, Xiaoyuan
    CERAMICS INTERNATIONAL, 2015, 41 (05) : 7042 - 7047
  • [22] Preparation of porous ceramics from tungsten tailings by adding pore-forming agent
    Wang K.-W.
    Huang J.-H.
    Zhu Y.
    Ku J.-G.
    Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities, 2022, 36 (06): : 879 - 885
  • [23] Porous silicon nitride ceramics prepared by carbothermal reduction-pressureless sintering method
    Lu, Yuan
    Yang, Jianfeng
    Lu, Weizhong
    Gao, Jiqiang
    Shan, Shaoyun
    Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society, 2009, 37 (08): : 1277 - 1281
  • [24] Pressureless sintering of silicon nitride ceramics with porous gradient structure for gas filter application
    Chen, Fei
    Ma, Lingling
    Shen, Qiang
    Wang, Chuanbin
    Zhang, Lianmeng
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2011, 42 (1-2): : 3 - 11
  • [25] Characterization of porous silicon nitride ceramics using bentonite as binder and sintering additive
    Jiang, Guang-Peng
    Yang, Jian-Feng
    Gao, Ji-Qiang
    Niihara, Koichi
    MATERIALS CHARACTERIZATION, 2009, 60 (05) : 456 - 460
  • [26] Effects of sintering temperature on pore characterization and strength of porous cordierite-mullite ceramics by a pore-forming in-situ technique
    Yan, Wen
    Luo, Hao
    Tong, Jun
    Li, Nan
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2012, 103 (10) : 1239 - 1243
  • [27] Preparation of porous mullite-corundum ceramics with controlled pore size using bioactive yeast as pore-forming agent
    Xu, Guogang
    Ma, Yinghua
    Cui, Hongzhi
    Ruan, Guozhi
    Zhang, Zhihui
    Zhao, Huiling
    MATERIALS LETTERS, 2014, 116 : 349 - 352
  • [28] Effects of pore structure on thermal conductivity and strength of alumina porous ceramics using carbon black as pore-forming agent
    Liu, Jingjing
    Li, Yuanbing
    Li, Yawei
    Sang, Shaobai
    Li, Shujing
    CERAMICS INTERNATIONAL, 2016, 42 (07) : 8221 - 8228
  • [29] Preparation of porous glass-ceramics from coal fly ash and asbestos tailings by high-temperature pore-forming
    Zeng, Li
    Sun, Hongjuan
    Peng, Tongjiang
    Zheng, Wenmiao
    WASTE MANAGEMENT, 2020, 106 : 184 - 192
  • [30] Modified cenospheres as non-sacrificial pore-forming agent for porous mullite ceramics
    Choo, Thye Foo
    Salleh, Mohamad Amran Mohd
    Kok, Kuan Ying
    Matori, Khamirul Amin
    CERAMICS INTERNATIONAL, 2019, 45 (17) : 21827 - 21834
12345