Optimal cleaning policies in heat exchanger networks under rapid fouling

被引:47
|
作者
Georgiadis, MC [1 ]
Papageorgiou, LG [1 ]
Macchietto, S [1 ]
机构
[1] Univ London Imperial Coll Sci Technol & Med, Ctr Proc Syst Engn, London SW7 2BY, England
关键词
D O I
10.1021/ie990166c
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
This paper addresses the problem of short-term cleaning scheduling in a special class of heat-exchanger networks (HENs). A salient characteristic of this problem is that the performance of each heat exchanger decreases with time and can then be restored to its initial state by performing cleaning operations. Because of its practical importance, a specific problem has been considered here involving decaying equipment performance due to milk fouling. A mixed-integer nonlinear-programming (MINLP) model is first presented incorporating general fouling profiles. This model is then linearized to a tight mixed-integer linear-programming (MILP) model which can be solved to global optimality. A detailed objective function is used to account for cleaning cost and energy requirements. The formulations can model serial and parallel HENs as well as network arrangements arising from the combination of these basic cases. The optimization algorithm determines simultaneously: (i) the number of cleaning operation tasks required along with their corresponding timings and (ii) the optimal utility utilization profile over time. A number of complex heat-exchanger networks examples are presented to illustrate the applicability of the proposed models together with comparative performance results between the MINLP and MILP models.
引用
收藏
页码:441 / 454
页数:14
相关论文
共 50 条
  • [31] Optimal Control of Heat Exchanger Networks
    Novazzi, Luis F.
    Zemp, Roger J.
    [J]. 10TH INTERNATIONAL SYMPOSIUM ON PROCESS SYSTEMS ENGINEERING, 2009, 27 : 1647 - 1652
  • [32] Fouling in heat exchanger
    不详
    [J]. MATERIALS PERFORMANCE, 2007, 46 (04) : 62 - 62
  • [33] The optimal design of heat exchanger networks considering heat exchanger types
    Fieg, Georg
    Hou, Xi-Ru
    Luo, Xing
    Ma, Hu-Gen
    [J]. 19TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, 2009, 26 : 659 - 664
  • [34] Impact of fouling and cleaning on plate fin and spine fin heat exchanger performance
    Pak, BC
    Groll, EA
    Braun, JE
    [J]. ASHRAE TRANSACTIONS 2005, VOL 111, PT 1, 2005, 111 : 496 - 504
  • [35] Impact of Nonuniform Fouling on Operating Temperatures in Heat Exchanger Networks
    Jackowski, Les
    Risse, Peter
    Smith, Rich
    [J]. HEAT TRANSFER ENGINEERING, 2017, 38 (7-8) : 753 - 761
  • [36] Optimization of operating conditions for mitigating fouling in heat exchanger networks
    Rodriguez, C.
    Smith, R.
    [J]. CHEMICAL ENGINEERING RESEARCH & DESIGN, 2007, 85 (A6): : 839 - 851
  • [37] Optimal cycle for plate heat exchanger cleaning in customer substation
    Burd, AL
    Burd, GS
    [J]. OFFICIAL PROCEEDINGS OF EIGHTY-SEVENTH ANNUAL CONFERENCE OF THE INTERNATIONAL DISTRICT ENERGY ASSOCIATION, VOL LXXXVII, 1996, : 177 - 192
  • [38] Fouling Prediction of Heat Exchanger Based on Genetic Optimal SVM Algorithm
    Sun Lingfang
    Zhang Yingying
    Saqi, Rina
    [J]. THIRD INTERNATIONAL CONFERENCE ON GENETIC AND EVOLUTIONARY COMPUTING, 2009, : 112 - 116
  • [39] OPTIMAL-DESIGN OF A HEAT-EXCHANGER UNDERGOING REACTION FOULING
    FRYER, PJ
    HOBIN, PJ
    MAWER, SP
    [J]. CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1988, 66 (04): : 558 - 562
  • [40] Monitoring heat exchanger fouling for optimal operation of a multiple effect evaporator
    Bermingham, SK
    Jonkers, M
    Kruizinga, GJ
    van Reisen, JLB
    Verheijen, PJT
    [J]. COMPUTERS & CHEMICAL ENGINEERING, 1999, 23 : S771 - S774