Influence of temperature upon properties of tailor-made PEBAX® MU 1657 nanocomposite membranes for post-combustion CO2 capture

被引：39

作者：

Rahman, Md. Mushfequr ^{[1
]}

Shishatskiy, Sergey ^{[1
]}

Abetz, Clarissa ^{[1
]}

Georgopanos, Prokopios ^{[1
]}

Neumann, Silvio ^{[1
]}

Khan, Muntazim Munir ^{[1
]}

Filiz, Volkan ^{[1
]}

Abetz, Volker ^{[1
,2
]}

机构：

[1] Helmholtz Zentrum Geesthacht, Polymer Res Inst, D-21502 Geesthacht, Germany

[2] Univ Hamburg, Inst Phys Chem, D-20146 Hamburg, Germany

来源：

JOURNAL OF MEMBRANE SCIENCE | 2014年 / 469卷

关键词：

PEBAX (R); POSS; Nanocomposite; Gas separation membrane; Mixed-matrix-membrane; GAS-TRANSPORT PROPERTIES; PEG FUNCTIONALIZED POSS; PERMEATION; BEHAVIOR;

D O I：

10.1016/j.memsci.2014.06.048

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Tailor-made block copolymer nanocomposite membranes are prepared by incorporation of 40 wt% methoxy poly(ethylene glycol) (PEG) functionalized polyoctahedral oligomeric silsesquioxanes (POSS) nanoparticles in commercial thermoplastic elastomer multiblock copolymer PEBAX (R) MH 1657. Atomic force microscopy was used to find out the location of the nanoparticles in the block copolymer matrix. Separation of CO2 from N-2 and H-2 is studied by measurements of single gas transport properties of nanocomposite materials using the time-lag method in the temperature range 30-70 degrees C. PEG functionalized POSS nanoparticles increase the CO2 permeability of the nanocomposite membranes without loss of CO2/N-2 and CO2/H-2 selectivity. Thermal properties of the nanocomposite membranes are studied by differential scanning calorimetry (DSC) to assess the stability of the nanocomposite membranes upon melting of polyether and polyamide blocks. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：344 / 354

页数：11

共 50 条

[31] Exergoeconomic Analysis of Post-Combustion CO2 Capture Processes
Schach, M. -O.
Schneider, R.
Schramm, H.
Repke, J. -U.
20TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, 2010, 28 : 997 - 1002
[32] Rational design of temperature swing adsorption cycles for post-combustion CO2 capture
Joss, Lisa
Gazzani, Matteo
Mazzotti, Marco
CHEMICAL ENGINEERING SCIENCE, 2017, 158 : 381 - 394
[33] Large-scale preparation of multilayer composite membranes for post-combustion CO2 capture
Sheng, Menglong
Dong, Songlin
Qiao, Zhihua
Li, Qinghua
Yuan, Ye
Xing, Guangyu
Zhao, Song
Wang, Jixiao
Wang, Zhi
JOURNAL OF MEMBRANE SCIENCE, 2021, 636
[34] Optimization of solvent properties for post-combustion CO2 capture using process simulation
Xin, Kun
Gallucci, Fausto
Annaland, Martin van Sint
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL, 2020, 99
[35] Chemical looping for pre-combustion and post-combustion CO2 capture
Mantripragada, Hari C.
Rubin, Edward S.
13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13, 2017, 114 : 6403 - 6410
[36] CO2 Absorption/Desorption Enhanced by Nanoparticles in Post-combustion CO2 Capture
Yu, W.
Wang, T.
Fang, M. X.
Hei, H.
Luo, Z. Y.
CLEAN COAL TECHNOLOGY AND SUSTAINABLE DEVELOPMENT, 2016, : 591 - 596
[37] Synthesis and characterization of nanocomposite SAPO-34/ceramic membrane for post-combustion CO2 capture
Kgaphola, Kedibone
Sigalas, Iakovos
Daramola, Michael O.
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, 2017, 12 (06) : 894 - 904
[38] Co-firing coal and biomass blends and their influence on the post-combustion CO2 capture installation
Wieckol-Ryk, Angelika
Smolinski, Adam
INTERNATIONAL CONFERENCE ENERGY, ENVIRONMENT AND MATERIAL SYSTEMS (EEMS 2017), 2017, 19
[39] Hybrid membrane cryogenic process for post-combustion Co2 capture
Belaissaoui, B.
Le Moullec, Y.
Willson, D.
Favre, E.
EUROMEMBRANE CONFERENCE 2012, 2012, 44 : 417 - 421
[40] DESIGN CHALLENGES FOR COMBINED CYCLES WITH POST-COMBUSTION CO2 CAPTURE
Zachary, Justin
PROCEEDINGS OF THE ASME TURBO EXPO 2009, VOL 1, 2009, : 881 - 890

← 1 2 3 4 5 →