A CASD/CASM method for prosthetic socket fabrication using the FDM technology

被引：24

作者：

Tay, FEH ^{[1
]}

Manna, MA ^{[1
]}

Liu, LX ^{[1
]}

机构：

[1] Natl Univ Singapore, Dept Mech Engn, Singapore 117548, Singapore

来源：

RAPID PROTOTYPING JOURNAL | 2002年 / 8卷 / 04期

关键词：

fused deposition modeling; CAD/CAM; disabled people; rapid prototyping;

D O I：

10.1108/13552540210441175

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

As an application of the computer aided design and computer aided manufacturing (CAD/CAM) technology in prosthetics, computer aided socket design and computer aided socket manufacturing (CASD/CASM) is becoming an active field in the prosthetics research. In this paper, a CASD/CASM method for prosthetic socket fabrication is described in detail. This is different from other fabrication methods in its novel combination of the CAD/CAM technology with fused deposition modeling (FDM) technology. Prosthetic sockets for volunteer amputees have been designed and fabricated in a FDM machine. In order to test the fabrication result, a final product was used to perform a clinical trial and some results are reported. In addition, the deficiency of the long fabrication time is addressed and some feasible solutions are discussed.

引用

页码：258 / 262

页数：5

共 50 条

[31] Advances in the measurement of prosthetic socket interface mechanics: a review of technology, techniques, and a 20-year update
Young, Peyton R.
Hebert, Jacqueline S.
Marasco, Paul D.
Carey, Jason P.
Schofield, Jonathon S.
EXPERT REVIEW OF MEDICAL DEVICES, 2023, 20 (09) : 729 - 739
[32] SYNTHESIS OF A CONDUCTIVE POLYMER FOR POTENTIAL USE IN PRINTING PROSTHETIC HANDS USING FDM TECHNIQUE
Zhong, Shaohong
Jia, Helen
Lin, Qi
Chor, Cheryl Yan Ting
Tan, Guoxian
PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING (PRO-AM 2016), 2016, : 482 - 487
[33] Marker-based method to measure movement between the residual limb and a transtibial prosthetic socket
Childers, Walter Lee
Siebert, Steven
PROSTHETICS AND ORTHOTICS INTERNATIONAL, 2016, 40 (06) : 720 - 728
[34] Capturing Prosthetic Socket Fitment: Preliminary Results Using an Ultrasound-based Device
LaPre, Andrew K.
Nguyen, Vinh Q.
Baspinar, Ulvi
White, Michael
Sup, Frank C.
2017 INTERNATIONAL CONFERENCE ON REHABILITATION ROBOTICS (ICORR), 2017, : 1221 - 1226
[35] Pressure characteristics at the stump/socket interface in transtibial amputees using an adaptive prosthetic foot
Wolf, Sebastian I.
Alimusaj, Merkur
Fradet, Laetitia
Siegel, Johannes
Braatz, Frank
CLINICAL BIOMECHANICS, 2009, 24 (10) : 860 - 865
[36] Analysis of Pressure Distribution in Transfemoral Prosthetic Socket for Prefabrication Evaluation via the Finite Element Method
Jamaludin, Mohd Syahmi
Hanafusa, Akihiko
Shinichirou, Yamamoto
Agarie, Yukio
Otsuka, Hiroshi
Ohnishi, Kengo
BIOENGINEERING-BASEL, 2019, 6 (04):
[37] Examination of anticipated chemical shift and shape distortion effect on materials commonly used in prosthetic socket fabrication when measured using MRI: A validation study
Safari, Mohammad Reza
Rowe, Philip
Buis, Arjan
JOURNAL OF REHABILITATION RESEARCH AND DEVELOPMENT, 2013, 50 (01): : 31 - 41
[38] Improvement of fabrication technology for InP Gunn devices using trench method
Kim, M. R.
Lee, S. D.
Lee, J. S.
Kwak, N. S.
Kim, S. D.
Rhee, J. K.
2008 GLOBAL SYMPOSIUM ON MILLIMETER WAVES, 2008, : 21 - 24
[39] Evaluating the Effectiveness of Transtibial Prosthetic Socket Shape Design Using Artificial Intelligence: A Clinical Comparison With Traditional Plaster Cast Socket Designs
van der Stelt, Merel
Berends, Bo
Papenburg, Marco
Langenhuyzen, Tom
Maal, Thomas
Brouwers, Lars
de Jong, Guido
Leijendekkers, Ruud
ARCHIVES OF PHYSICAL MEDICINE AND REHABILITATION, 2025, 106 (02): : 239 - 246
[40] Fabrication, characterization, and simulation of hybrid flax-sisal fiber reinforced epoxy composite for prosthetic limb socket application
Kitila, Luna Geo
Wolla, Desalegn Wogaso
JOURNAL OF COMPOSITE MATERIALS, 2022, 56 (10) : 1605 - 1614

← 1 2 3 4 5 →