A CASD/CASM method for prosthetic socket fabrication using the FDM technology

被引：24
|
作者：
Tay, FEH [1 ]
Manna, MA [1 ]
Liu, LX [1 ]
机构：
[1] Natl Univ Singapore, Dept Mech Engn, Singapore 117548, Singapore
来源：
RAPID PROTOTYPING JOURNAL | 2002年 / 8卷 / 04期
关键词：
fused deposition modeling; CAD/CAM; disabled people; rapid prototyping;
D O I：
10.1108/13552540210441175
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
As an application of the computer aided design and computer aided manufacturing (CAD/CAM) technology in prosthetics, computer aided socket design and computer aided socket manufacturing (CASD/CASM) is becoming an active field in the prosthetics research. In this paper, a CASD/CASM method for prosthetic socket fabrication is described in detail. This is different from other fabrication methods in its novel combination of the CAD/CAM technology with fused deposition modeling (FDM) technology. Prosthetic sockets for volunteer amputees have been designed and fabricated in a FDM machine. In order to test the fabrication result, a final product was used to perform a clinical trial and some results are reported. In addition, the deficiency of the long fabrication time is addressed and some feasible solutions are discussed.
引用
收藏
页码：258 / 262
页数：5
相关论文
共 50 条
  • [41] Evaluation of the Effects of Geometrical Changes in Prosthetic Socket Towards Transfemoral Residuum via Finite Element Method
    Jamaludin, Mohd Syahmi
    Hanafusa, Akihiko
    Yamamoto, Shin-Ichirou
    Agarie, Yukio
    Otsuka, Hiroshi
    Onishi, Kengo
    2018 IEEE-EMBS CONFERENCE ON BIOMEDICAL ENGINEERING AND SCIENCES (IECBES), 2018, : 314 - 319
  • [42] Designing an Adaptive Prosthetic Socket Controller Using H-Infinity Loop Shaping Synthesis
    Nguyen, Harrison
    Shallal, Christopher
    Thakor, Nitish
    2019 IEEE 16TH INTERNATIONAL CONFERENCE ON REHABILITATION ROBOTICS (ICORR), 2019, : 1266 - 1271
  • [43] Affordable and Faster Transradial Prosthetic Socket Production Using Photogrammetry and 3D Printing
    Ismail, Rifky
    Taqriban, Rilo Berdin
    Ariyanto, Mochammad
    Atmaja, Ali Tri
    Sugiyanto
    Caesarendra, Wahyu
    Glowacz, Adam
    Irfan, Muhammad
    Glowacz, Witold
    ELECTRONICS, 2020, 9 (09) : 1 - 11
  • [44] QUANTITATIVE METHOD TO MEASURE RELATIONSHIP BETWEEN PROSTHETIC GAIT AND FORCES PRODUCED AT STUMP-SOCKET INTERFACE
    LEAVITT, LA
    PETERSON, CR
    CANZONERI, J
    PAZ, R
    MUILENBURG, AL
    RHYNE, VT
    AMERICAN JOURNAL OF PHYSICAL MEDICINE, 1970, 49 (03): : 192 - +
  • [45] Slope stabilization with socket walls using the observational method
    Brandl, H.
    Blovsky, S.
    Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering, Vols 1-5: GEOTECHNOLOGY IN HARMONY WITH THE GLOBAL ENVIRONMENT, 2005, : 2485 - 2488
  • [46] Study of heat transfer characteristics in PCFG fabrication technology using heat method
    Qi, Yuefeng
    Qiao, Hanping
    Bi, Weihong
    CHINESE OPTICS LETTERS, 2011, 9 (02)
  • [47] Study of heat transfer characteristics in PCFG fabrication technology using heat method
    齐跃峰
    乔汉平
    毕卫红
    Chinese Optics Letters, 2011, 9 (02) : 22 - 26
  • [48] Facial prosthetic model fabrication using rapid prototyping tools
    Nanyang Technological University, Singapore, Singapore
    Integrated Manufacturing Systems, 2000, 11 (01): : 42 - 53
  • [49] Advanced trans-tibial socket fabrication using selective laser sintering
    Rogers, Bill
    Bosker, Gordon W.
    Crawford, Richard H.
    Faustini, Mario C.
    Neptune, Richard R.
    Walden, Gail
    Gitter, Andrew J.
    PROSTHETICS AND ORTHOTICS INTERNATIONAL, 2007, 31 (01) : 88 - 100
  • [50] Analyze the efficiency on FDM process of Rapid Prototyping Technology with the new filling method
    Ren, Chong
    Cao, Yiqing
    Fan, Lirong
    MECHATRONICS AND INTELLIGENT MATERIALS II, PTS 1-6, 2012, 490-495 : 2095 - +
12345