TiAlSiN Coatings Prepared by Hybrid PVD Technology for High Speed Milling of Hardened Steel

被引：0
|
作者：
Yu, D. H. [1 ]
Wang, C. Y. [1 ]
Cheng, X. L. [1 ]
Song, Y. X. [1 ]
机构：
[1] Guangdong Univ Technol, Guangzhou 510006, Guangdong, Peoples R China
来源：
ULTRA-PRECISION MACHINING TECHNOLOGIES | 2009年 / 69-70卷
关键词：
TiAlSiN coatings; Hybrid PVD; Nanocomposition; High speed milling; TI-SI-N;
D O I：
10.4028/www.scientific.net/AMR.69-70.423
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
TiAlSiN coatings with different AI content were prepared by hollow cathode discharge ion plating (HCDIP) and medium frequency magnetron sputtering ion plating (MFMSIP) hybrid physical vapor deposition (PVD) coating system. The composition, microstructure, mechanical properties of these coatings were systematically investigated by means of EDX, XRD, SEM, nanoindentation, scratch and tribological tests. It was found that the coatings had (111) or (200) preferred orientation with addition of Al. Proper content of AI led to increase of microhardness and adhesion. The flank wear of carbide end mill coated with TiAlSiN had the least wear than those coated with TiAlN and TiSiN coatings under the high speed milling of hardened steel experiments.
引用
收藏
页码：423 / 427
页数：5
相关论文
共 50 条
  • [41] Optimization strategy in end milling process for high speed machining of hardened die/mold steel
    Tang, Ying
    JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2006, 13 (03): : 240 - 243
  • [42] Dynamics Characteristics of High Speed Ball-end Milling Cutter for Machining Hardened Steel
    Jiang, B.
    Zheng, M. L.
    Zhou, J.
    Xia, D. H.
    MANUFACTURING AUTOMATION TECHNOLOGY DEVELOPMENT, 2011, 455 : 127 - 131
  • [43] Physical field evaluation model of high speed ball-end milling hardened steel
    Jiang, B.
    Xia, D.H.
    Zheng, M.L.
    Li, Y.
    Liu, X.C.
    Advanced Materials Research, 2012, 426 : 122 - 125
  • [44] Research on cutting performances of tool rounded cutting edge in high speed milling hardened steel
    Yang, S. C.
    Zheng, M. L.
    Fan, Y. H.
    Xu, W.
    HIGH SPEED MACHINING, 2011, 188 : 139 - 144
  • [45] Cluster Analysis on Vibration Characteristic in High Speed Ball-end Milling Hardened Steel
    Jiang, B.
    Yang, S. C.
    Yang, Y. J.
    Zheng, M. L.
    Sun, P.
    HIGH SPEED MACHINING, 2011, 188 : 145 - +
  • [46] Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel
    Shnfir, Mohamed
    Kouam, J.
    Songmene, V.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 110 (3-4): : 617 - 627
  • [47] Cutter path orientations when high-speed finish milling inclined hardened steel
    C.K. Toh
    The International Journal of Advanced Manufacturing Technology, 2006, 27 : 473 - 480
  • [48] High-speed milling of hardened steel under minimal quantity lubrication with liquid nitrogen
    Wu, Shixiong
    Liu, Guangdong
    Zhang, Wenfeng
    Chen, Wanglin
    Wang, Chengyong
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 95 : 351 - 368
  • [49] Comparison of chip surface temperature between up and down milling orientations in high speed rough milling of hardened steel
    Toh, CK
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 167 (01) : 110 - 118
  • [50] Modeling and simulation of the high-speed milling of hardened steel SKD11 (62HRC) based on SHPB technology
    Wang, Chengyong
    Ding, Feng
    Tang, Dewen
    Zheng, Lijuan
    Li, Suyang
    Xie, Yingxing
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2016, 108 : 13 - 26
12345