TiAlSiN Coatings Prepared by Hybrid PVD Technology for High Speed Milling of Hardened Steel

被引：0

作者：

Yu, D. H. ^{[1
]}

Wang, C. Y. ^{[1
]}

Cheng, X. L. ^{[1
]}

Song, Y. X. ^{[1
]}

机构：

[1] Guangdong Univ Technol, Guangzhou 510006, Guangdong, Peoples R China

来源：

ULTRA-PRECISION MACHINING TECHNOLOGIES | 2009年 / 69-70卷

关键词：

TiAlSiN coatings; Hybrid PVD; Nanocomposition; High speed milling; TI-SI-N;

D O I：

10.4028/www.scientific.net/AMR.69-70.423

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

TiAlSiN coatings with different AI content were prepared by hollow cathode discharge ion plating (HCDIP) and medium frequency magnetron sputtering ion plating (MFMSIP) hybrid physical vapor deposition (PVD) coating system. The composition, microstructure, mechanical properties of these coatings were systematically investigated by means of EDX, XRD, SEM, nanoindentation, scratch and tribological tests. It was found that the coatings had (111) or (200) preferred orientation with addition of Al. Proper content of AI led to increase of microhardness and adhesion. The flank wear of carbide end mill coated with TiAlSiN had the least wear than those coated with TiAlN and TiSiN coatings under the high speed milling of hardened steel experiments.

引用

页码：423 / 427

页数：5

共 50 条

[31] A review of ultra high speed milling of hardened steels
Dewes, RC
Aspinwall, DK
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 69 (1-3) : 1 - 17
[32] Testing of Thin PVD Coatings Deposited on PM Speed Steel
Jakubeczyova, Dagmar
Hvizdos, Pavol
Hagarova, Maria
Dzupon, Miroslav
CHEMICKE LISTY, 2011, 105 : S618 - S620
[33] Surface roughness evaluation of high-speed milling of hot work tool steel H13 for different PVD tool coatings
Mativenga, PT
Hon, KKB
ADVANCES IN MANUFACTURING TECHNOLOGY - XIV, 2000, : 339 - 343
[34] A modified offset cutter path strategy for high-speed rough milling hardened steel
Toh, CK
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2003, 217 (08) : 1161 - 1166
[35] Hard Coatings with High Film Thickness Prepared by PVD
Zimmer, Otmar
Kaulfuss, Frank
PLASMA PROCESSES AND POLYMERS, 2009, 6 : S152 - S156
[36] Static and dynamic cutting force analysis when high speed rough milling hardened steel
Toh, CK
MATERIALS & DESIGN, 2004, 25 (01) : 41 - 50
[37] Cutter path orientations when high-speed finish milling inclined hardened steel
Toh, CK
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 27 (5-6): : 473 - 480
[38] Computer Modeling Application for Predicting of the Passing of the High-Speed Milling Machining Hardened Steel
Permyakov, Alexander
Dobrotvorskiy, Sergey
Dobrovolska, Ludmila
Basova, Yevheniia
Ivanova, Maryna
ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING, 2019, : 135 - 145
[39] Evaluation and selection of hard coatings for micro milling of hardened tool steel
Aramcharoen, A.
Mativenga, P. T.
Yang, S.
Cooke, K. E.
Teer, D. G.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (14): : 1578 - 1584
[40] Optimization strategy in end milling process for high speed machining of hardened die/mold steel
Tang, Ying
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2006, 13 (03): : 240 - 243

← 1 2 3 4 5 →