TiAlSiN Coatings Prepared by Hybrid PVD Technology for High Speed Milling of Hardened Steel

被引：0

作者：

Yu, D. H. ^{[1
]}

Wang, C. Y. ^{[1
]}

Cheng, X. L. ^{[1
]}

Song, Y. X. ^{[1
]}

机构：

[1] Guangdong Univ Technol, Guangzhou 510006, Guangdong, Peoples R China

来源：

ULTRA-PRECISION MACHINING TECHNOLOGIES | 2009年 / 69-70卷

关键词：

TiAlSiN coatings; Hybrid PVD; Nanocomposition; High speed milling; TI-SI-N;

D O I：

10.4028/www.scientific.net/AMR.69-70.423

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

TiAlSiN coatings with different AI content were prepared by hollow cathode discharge ion plating (HCDIP) and medium frequency magnetron sputtering ion plating (MFMSIP) hybrid physical vapor deposition (PVD) coating system. The composition, microstructure, mechanical properties of these coatings were systematically investigated by means of EDX, XRD, SEM, nanoindentation, scratch and tribological tests. It was found that the coatings had (111) or (200) preferred orientation with addition of Al. Proper content of AI led to increase of microhardness and adhesion. The flank wear of carbide end mill coated with TiAlSiN had the least wear than those coated with TiAlN and TiSiN coatings under the high speed milling of hardened steel experiments.

引用

页码：423 / 427

页数：5

共 50 条

[21] Study on Performance of PVD AlTiN Coatings and AlTiN-Based Composite Coatings in Dry End Milling of Hardened Steel SKD11
Jing, Lulu
Chen, Ming
An, Qinglong
METALS, 2021, 11 (12)
[22] INTERFACE STRENGTH OF TITANIUM NITRIDE COATINGS ON HARDENED HIGH-SPEED STEEL
ROTHER, B
LUNOW, T
LEONHARDT, G
SURFACE & COATINGS TECHNOLOGY, 1995, 71 (03): : 229 - 232
[23] Tool life and process dynamics in high speed ball end milling of hardened steel
Wojciechowski, Szymon
Twardowski, Pawel
FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 289 - 294
[24] Research on the Chip Formation Mechanism during the high-speed milling of hardened steel
Wang, Chengyong
Xie, Yingxing
Zheng, Lijuan
Qin, Zhe
Tang, Dewen
Song, Yuexian
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2014, 79 : 31 - 48
[25] Surface topography analysis when high-speed rough milling hardened steel
Toh, CK
MATERIALS AND MANUFACTURING PROCESSES, 2003, 18 (06) : 849 - 862
[26] Incidence Analysis on Characteristic of High Speed Ball-end Milling Hardened Steel
Jiang, B.
Yang, Y. J.
Liu, X. L.
Qi, C. X.
Zhao, X. F.
HIGH SPEED MACHINING, 2011, 188 : 73 - 77
[27] High speed PVD thermal barrier coatings
Beele, Wolfram
Eschendorff, Gerald
ADVANCED ENGINEERING MATERIALS, 2006, 8 (07) : 673 - 676
[28] An Experimental Investigation on Micro End Milling with High-Speed Up Cut Milling for Hardened Die Steel
Kino, Haruki
Imada, Takumi
Ogawa, Keiji
Nakagawa, Heisaburo
Kojima, Hitomi
MATERIALS, 2020, 13 (21) : 1 - 13
[29] The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel
Gerth, J.
Wiklund, U.
WEAR, 2008, 264 (9-10) : 885 - 892
[30] Review of ultra high speed milling of hardened steels
Univ of Birmingham, Birmingham, United Kingdom
J Mater Process Technol, 1-3 (1-17):

← 1 2 3 4 5 →