TiAlSiN Coatings Prepared by Hybrid PVD Technology for High Speed Milling of Hardened Steel

被引：0
|
作者：
Yu, D. H. [1 ]
Wang, C. Y. [1 ]
Cheng, X. L. [1 ]
Song, Y. X. [1 ]
机构：
[1] Guangdong Univ Technol, Guangzhou 510006, Guangdong, Peoples R China
来源：
ULTRA-PRECISION MACHINING TECHNOLOGIES | 2009年 / 69-70卷
关键词：
TiAlSiN coatings; Hybrid PVD; Nanocomposition; High speed milling; TI-SI-N;
D O I：
10.4028/www.scientific.net/AMR.69-70.423
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
TiAlSiN coatings with different AI content were prepared by hollow cathode discharge ion plating (HCDIP) and medium frequency magnetron sputtering ion plating (MFMSIP) hybrid physical vapor deposition (PVD) coating system. The composition, microstructure, mechanical properties of these coatings were systematically investigated by means of EDX, XRD, SEM, nanoindentation, scratch and tribological tests. It was found that the coatings had (111) or (200) preferred orientation with addition of Al. Proper content of AI led to increase of microhardness and adhesion. The flank wear of carbide end mill coated with TiAlSiN had the least wear than those coated with TiAlN and TiSiN coatings under the high speed milling of hardened steel experiments.
引用
收藏
页码：423 / 427
页数：5
相关论文
共 50 条
  • [1] Microstructure and properties of TiAlSiN coatings prepared by hybrid PVD technology
    Yu, Donghai
    Wang, Chengyong
    Cheng, Xiaoling
    Zhang, Fenglin
    THIN SOLID FILMS, 2009, 517 (17) : 4950 - 4955
  • [2] High temperature tribological properties of TiAlSiN coatings produced by hybrid PVD technology
    He, Nairu
    Li, Hongxuan
    Ji, Li
    Liu, Xiaohong
    Zhou, Huidi
    Chen, Jianmin
    TRIBOLOGY INTERNATIONAL, 2016, 98 : 133 - 143
  • [3] Deposition and characterization of TiAlSiN coatings prepared by hybrid PVD coating system
    Wu, Jinfeng
    He, Nairu
    Li, Hongxuan
    Liu, Xiaohong
    Ji, Li
    Huang, Xiaopeng
    Chen, Jianmin
    SURFACE AND INTERFACE ANALYSIS, 2015, 47 (02) : 184 - 191
  • [4] Study of the wear behaviour of TiAlSiN and TiAlN PVD coated tools on milling operations of pre-hardened tool steel
    Sousa, Vitor F. C.
    Silva, F. J. G.
    Alexandre, R.
    Fecheira, J. S.
    Silva, F. P. N.
    WEAR, 2021, 476
  • [5] High Speed Milling of Hardened Steel Convex Surface
    Castanhera, Isabela da Costa
    Diniz, Anselmo Eduardo
    44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, 2016, 5 : 220 - 231
  • [6] Study of the wear behaviour of TiAlSiN and TiAlN PVD coated tools on milling operations of pre-hardened tool steel
    Sousa, Vitor F.C.
    Silva, F.J.G.
    Alexandre, R.
    Fecheira, J.S.
    Silva, F.P.N.
    Silva, F.J.G. (fgs@isep.ipp.pt), 1600, Elsevier Ltd (476):
  • [7] High speed and high efficient end milling of hardened steel
    Usuki, H
    Murotani, S
    Sato, K
    Furuya, S
    Nagai, T
    Sakurai, M
    Anma, K
    PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY, 2002, : 286 - 291
  • [8] High speed milling of hardened steel moulds and press tools
    Singh, R
    Coldwell, HL
    Aspinwall, DK
    Dewes, RC
    PROCEEDINGS OF THE 33RD INTERNATIONAL MATADOR CONFERENCE, 2000, : 427 - 432
  • [9] Dynamics Characteristic of Cutter Wear in High Speed Milling Hardened Steel
    Jiang, Bin
    Qi, Changxing
    Xia, Danhua
    Cao, Shuai
    Chen, Bo
    ADVANCED SCIENCE LETTERS, 2011, 4 (8-10) : 3103 - 3107
  • [10] Cutter path strategies in high speed rough milling of hardened steel
    Toh, CK
    MATERIALS & DESIGN, 2006, 27 (02) : 107 - 114
12345