Correlation Between Friction and Wear of Cubic Borone Nitride Cutting Tools in Precision Hard Machining

被引：4
|
作者：
Grzesik, Wit [1 ]
Denkena, Berend [2 ]
Zak, Krzysztof [1 ]
Grove, Thilo [2 ]
Bergmann, Benjamin [2 ]
机构：
[1] Opole Univ Technol, Fac Mech Engn, Mikolajczyka St 5, PL-45271 Opole, Poland
[2] Gottfried Wilhelm Leibniz Univ Hannover, Inst Prod Engn & Machine Tools, Univ 2, D-30823 Garbsen, Germany
来源：
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME | 2016年 / 138卷 / 03期
关键词：
hard machining; CBN tool; tool wear; friction; plowing energy; COEFFICIENT;
D O I：
10.1115/1.4031189
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, the contribution of tool wear to friction was determined for precision hard turning using Cubic Borone Nitride (CBN) cutting tools. The tool nose wear VBC and the corresponding changes of component forces Fc, Ff, and Fp resulting from tool wear evolution were continuously measured during wear tests. Based on the mechanics of nonorthogonal cutting, the normal and friction forces acting on rake and flank faces were calculated for all measuring points, and as a result, relevant changes of the friction coefficient were determined. Additionally, friction changes resulting from tool wear under different feed rate, depth of cut, and tool nose radius were discussed in terms of the plowing energy produced by the tool nose.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] Wear mechanism of carbide cutting tools in machining process
    Ghani, Jaharah A.
    Baron, Che Hassan Che
    Tomadi, Siti Haryani
    Kasim, Mohd Shahir
    Sulaiman, Mohd Amri
    PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015, 2015, : 133 - 134
  • [32] Wear characteristics of cutting tools in high speed machining
    Liu, Zhan-Qiang
    Ai, Xing
    Mocaxue Xuebao/Tribology, 2002, 22 (06): : 468 - 471
  • [33] The performance of polycrystalline cubic boron nitride tools in continuous, semi-interrupted, and interrupted hard machining
    Halpin, T.
    Byrne, G.
    Barry, J.
    Ahearne, E.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2009, 223 (08) : 947 - 953
  • [34] Ultra-Precision Machining: Cutting With Diamond Tools
    Lucca, D. A.
    Klopfstein, M. J.
    Riemer, O.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2020, 142 (11):
  • [35] A review of cutting tools for ultra-precision machining
    Ganesan, G.
    Malayath, Ganesh
    Mote, Rakesh G.
    MACHINING SCIENCE AND TECHNOLOGY, 2022, 26 (06) : 923 - 976
  • [36] Analysis of the correlation between tool wear and cutting damping generated in the machining process
    Jang, Dong Y.
    Choi, Y.
    S T L E Tribology Transactions, 1994, 37 (01): : 154 - 160
  • [37] ANALYSIS OF THE CORRELATION BETWEEN TOOL WEAR AND CUTTING DAMPING GENERATED IN THE MACHINING PROCESS
    JANG, DY
    CHOI, Y
    TRIBOLOGY TRANSACTIONS, 1994, 37 (01) : 154 - 160
  • [38] Progressive tool-wear in machining with coated grooved tools and its correlation with cutting temperature
    Wanigarathne, PC
    Kardekar, AD
    Dillon, OW
    Poulachon, G
    Jawahir, IS
    WEAR, 2005, 259 : 1215 - 1224
  • [39] Diamond and Cubic Boron Nitride Tools for Machining Metals.
    Weiland, W.
    1978, 68 (02): : 61 - 65
  • [40] Wear trends of PCBN cutting tools in hard turning
    Dawson, TG
    Kurfess, TR
    METAL CUTTING AND HIGH SPEED MACHINING, 2002, : 221 - 231
12345