Wear mechanism of carbide cutting tools in machining process

被引：0

作者：

Ghani, Jaharah A. ^{[1
]}

Baron, Che Hassan Che ^{[1
]}

Tomadi, Siti Haryani ^{[2
]}

Kasim, Mohd Shahir ^{[2
]}

Sulaiman, Mohd Amri ^{[3
]}

机构：

[1] Univ Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Mech & Mat Engn, Bangi 43600, Selangor, Malaysia

[2] Univ Malaysia Pahang, Fac Mech Engn, Kuantan 26300, Pahang, Malaysia

[3] Univ Teknikal Malaysia Melaka, Fac Mfg Engn, Hang Tuah Jaya 49100, Melaka, Malaysia

来源：

PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015 | 2015年

关键词：

Wear mechanism; carbide cutting tool; milling process; turning process;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Carbide cutting tool is widely used in machining process due to its availability. It is also cheaper than the majority of better performance cutting tool such as cubic boron nitride (CBN), polycrystalline diamond etc. In addition, the carbide cutting tool has substantial hardness and toughness that is suitable to be applied in intermittent cutting compared to the ceramic cutting tool. This paper presents the case study of wear mechanism experienced on edge of the coated and uncoated carbide tools in machining process (turning and milling). It was observed that the tools failed primarily due to wear on the two main areas of flank and rake faces for machining Inconel 718, and titanium alloy. Therefore it can be concluded that the mode of failure for the carbide cutting tools was similar regardless of the machining operations. The failure is believed to be due to the mechanical properties of the carbide materials such as brittleness rather than the type of machining operations.

引用

页码：133 / 134

页数：2

共 50 条

[1] Wear mechanism of coated and uncoated carbide cutting tool in machining process
Ghani, Jaharah A.
Haron, Che Hassan Che
Kasim, Mohd Shahir
Sulaiman, Mohd Amri
Tomadi, Siti Haryani
[J]. JOURNAL OF MATERIALS RESEARCH, 2016, 31 (13) : 1873 - 1879
[2] Wear mechanism of coated and uncoated carbide cutting tool in machining process
Jaharah A. Ghani
Che Hassan Che Haron
Mohd Shahir Kasim
Mohd Amri Sulaiman
Siti Haryani Tomadi
[J]. Journal of Materials Research, 2016, 31 : 1873 - 1879
[3] The influence of cutting fluid conditions and machining parameters on cutting performance and wear mechanism of coated carbide tools
Mir, M. J.
Wani, M. F.
[J]. JURNAL TRIBOLOGI, 2018, 18 : 58 - 80
[4] The Wear Mechanism of Coated Cutting Tools During Machining Process under the Thermal Effect
Niu, Min
[J]. INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 2022, 40 (01) : 347 - 352
[5] MECHANISM GOVERNING WEAR OF CARBIDE TOOLS AT HIGH CUTTING TEMPERATURES
GUREVICH, DM
[J]. RUSSIAN ENGINEERING JOURNAL, 1976, 56 (03): : 64 - 66
[6] MECHANISM OF WEAR OF CEMENTED CARBIDE TIPS ON ROCK CUTTING TOOLS
KENNY, P
WRIGHT, AC
[J]. WEAR, 1974, 30 (03) : 377 - 383
[7] Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools
Devillez, A.
Schneider, F.
Dominiak, S.
Dudzinski, D.
Larrouquere, D.
[J]. WEAR, 2007, 262 (7-8) : 931 - 942
[8] Modelling the orthogonal machining process using coated carbide cutting tools
Monaghan, J
MacGinley, T
[J]. COMPUTATIONAL MATERIALS SCIENCE, 1999, 16 (1-4) : 275 - 284
[9] CRATER WEAR ON CARBIDE CUTTING TOOLS
OSMAN, MOM
[J]. TOOL AND MANUFACTURING ENGINEER, 1969, 62 (03): : 67 - &
[10] WEAR RATE OF CARBIDE CUTTING TOOLS
TRENT, EM
[J]. POWDER METALLURGY, 1969, 12 (24) : 566 - &

← 1 2 3 4 5 →