Correlation Between Friction and Wear of Cubic Borone Nitride Cutting Tools in Precision Hard Machining

被引：4
|
作者：
Grzesik, Wit [1 ]
Denkena, Berend [2 ]
Zak, Krzysztof [1 ]
Grove, Thilo [2 ]
Bergmann, Benjamin [2 ]
机构：
[1] Opole Univ Technol, Fac Mech Engn, Mikolajczyka St 5, PL-45271 Opole, Poland
[2] Gottfried Wilhelm Leibniz Univ Hannover, Inst Prod Engn & Machine Tools, Univ 2, D-30823 Garbsen, Germany
来源：
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME | 2016年 / 138卷 / 03期
关键词：
hard machining; CBN tool; tool wear; friction; plowing energy; COEFFICIENT;
D O I：
10.1115/1.4031189
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, the contribution of tool wear to friction was determined for precision hard turning using Cubic Borone Nitride (CBN) cutting tools. The tool nose wear VBC and the corresponding changes of component forces Fc, Ff, and Fp resulting from tool wear evolution were continuously measured during wear tests. Based on the mechanics of nonorthogonal cutting, the normal and friction forces acting on rake and flank faces were calculated for all measuring points, and as a result, relevant changes of the friction coefficient were determined. Additionally, friction changes resulting from tool wear under different feed rate, depth of cut, and tool nose radius were discussed in terms of the plowing energy produced by the tool nose.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Wear and friction properties of hard coatings for forming tools
    Podgornik, B
    Hogmark, S
    Sandberg, O
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2004, 50 (03): : 146 - 156
  • [42] Optimization of Cutting Parameters for Cubic Boron Nitride Tool Wear in Hard Turning AISI M2
    Zhou, Tianwen
    Shi, Guangfeng
    Wu, Qingtang
    Wang, Zezhen
    Che, Jianwei
    Wu, Huan
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (20) : 11298 - 11308
  • [43] A mesoplasticitiy analysis of cutting friction in ultra-precision machining
    Lee, WB
    Cheung, CF
    To, S
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 : 292 - 297
  • [44] Investigation of wear and tool life of coated carbide and cubic boron nitride cutting tools in high speed milling
    Twardowski, Pawel
    Legutko, Stanislaw
    Krolczyk, Grzegorz M.
    Hloch, Sergej
    ADVANCES IN MECHANICAL ENGINEERING, 2015, 7 (06) : 1 - 9
  • [45] RADIOACTIVE WEAR MEASUREMENTS OF CUTTING TOOLS MADE OF HARD METAL BY SPLINTERING OFF ALUMINUM MACHINING ALLOY STOCKS
    FREVERT, E
    ISOTOPENPRAXIS, 1977, 13 (05): : 161 - 169
  • [46] Morphological study of a cubic boron nitride (CBN) cutting tool and characterization of its wear scenarios in abrasive machining process
    Fang, Shiqi
    CERAMICS INTERNATIONAL, 2020, 46 (11) : 19491 - 19498
  • [47] Wear phenomenon in the hard steel machining using ceramic tools
    Grzesik, W.
    Zalisz, Z.
    TRIBOLOGY INTERNATIONAL, 2008, 41 (08) : 802 - 812
  • [48] Wear of CBN Tools in Ultra-Precision Machining of STAVAX
    X. Ding
    W.Y.H. Liew
    B.K.A. Ngoi
    J.G.K. Gan
    S.H. Yeo
    Tribology Letters, 2002, 12 : 3 - 12
  • [49] Wear of CBN tools in ultra-precision machining of STAVAX
    Ding, X
    Liew, WYH
    Ngoi, BKA
    Gan, JGK
    Yeo, SH
    TRIBOLOGY LETTERS, 2002, 12 (01) : 3 - 12
  • [50] Investigation of the wear mechanism of cubic boron nitride tools used for the machining of compacted graphite iron and grey cast iron
    Gastel, M
    Konetschny, C
    Reuter, U
    Fasel, C
    Schulz, H
    Riedel, R
    Ortner, HM
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2000, 18 (06): : 287 - 296
12345