Effect of surface finishes on ball shear strength in BGA joints with Sn-3.5 mass% Ag solder

被引：34
|
作者：
Lee, CB [1 ]
Lee, IY [1 ]
Jung, SB [1 ]
Shur, CC [1 ]
机构：
[1] Sungkyunkwan Univ, Dept Adv Mat Engn, Jangan Ku, Suwon 440746, South Korea
来源：
MATERIALS TRANSACTIONS | 2002年 / 43卷 / 04期
关键词：
ball shear test; reliability; fracture surface; ball grid array (BGA) joint; isothermal aging;
D O I：
10.2320/matertrans.43.751
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present Study is aimed at the assessment on the reliability of solder ball attachment to the bond pads of BGA substrate with various plating schemes. The reliability of solder ball attachment is characterized by mechanical ball shear tests. In addition to the ball shear tests, SEM is performed to inspect the cross-section and the fracture surface of the tested specimens for failure analysis. The aging was conducted in convection ovens in air at 343, 393, 423 and 443 K respectively for times ranging 8.64 x 10(4) to 864 x 10(4) s, Without regard to the deposited layer, the shear strength of BGA joints decreased with the increasing temperature and time. After isothermal aging. the fracture surface shows various characteristics depending on aging temperature and time, and the types of BGA pad.
引用
收藏
页码：751 / 756
页数：6
相关论文
共 50 条
  • [41] Effect of electromigration on interfacial reactions between electroless Ni-P and Sn-3.5% Ag solder
    Kumar, A
    He, M
    Chen, Z
    Teo, PS
    THIN SOLID FILMS, 2004, 462 : 413 - 418
  • [42] Effect of solder bump geometry on the microstructure of Sn-3.5 wt% Ag on electroless nickel immersion gold during solder dipping
    Huang, ZH
    Conway, PP
    Liu, CQ
    Thomson, RC
    JOURNAL OF MATERIALS RESEARCH, 2005, 20 (03) : 649 - 658
  • [43] Effect of solder bump geometry on the microstructure of Sn-3.5 wt% Ag on electroless nickel immersion gold during solder dipping
    Zhiheng Huang
    Paul P. Conway
    Changqing Liu
    Rachel C. Thomson
    Journal of Materials Research, 2005, 20 : 649 - 658
  • [44] Effects of laser parameters on the characteristics of a Sn-3.5 wt.%Ag solder joint
    Jeng-O Kim
    Jae-Pil Jung
    Jae-Hoon Lee
    Hee-Shin Jeong-Suh
    Metals and Materials International, 2009, 15 : 119 - 123
  • [45] Interfacial reactions between Sn-3.5 Ag solder and Ni–W alloy films
    A. S. M. A. Haseeb
    C. S. Chew
    Mohd Rafie Johan
    Journal of Materials Science: Materials in Electronics, 2011, 22 : 1372 - 1377
  • [46] Creep deformation of Sn-3.5Ag-xCu and Sn-3.5Ag-xBi solder joints
    S. W. Shin
    Jin Yu
    Journal of Electronic Materials, 2005, 34 : 188 - 195
  • [47] Creep deformation of Sn-3.5Ag-xCu and Sn-3.5Ag-xBi solder joints
    Shin, SW
    Yu, J
    JOURNAL OF ELECTRONIC MATERIALS, 2005, 34 (02) : 188 - 195
  • [48] Effects of Laser Parameters on the Characteristics of a Sn-3.5 wt.%Ag Solder Joint
    Kim, Jeng-O
    Jung, Jae-Pil
    Lee, Jae-Hoon
    Jeong-Suh
    Kang, Hee-Shin
    METALS AND MATERIALS INTERNATIONAL, 2009, 15 (01) : 119 - 123
  • [49] Shear strength analysis of ball grid array (BGA) solder interfaces
    Alam, M. O.
    Lu, H.
    Bailey, Chris
    Wu, B. Y.
    Chan, Y. C.
    2007 9TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, VOLS 1 AND 2, 2007, : 770 - +
  • [50] Effect of variation of microstructure on the creep and rupture strengths of a Sn-3.5% Ag lead-free solder alloy
    Wu, KP
    Wade, N
    Yamada, S
    Miyahara, K
    ZEITSCHRIFT FUR METALLKUNDE, 2004, 95 (03): : 185 - 188
12345