Effect of surface finishes on ball shear strength in BGA joints with Sn-3.5 mass% Ag solder

被引：34

作者：

Lee, CB ^{[1
]}

Lee, IY ^{[1
]}

Jung, SB ^{[1
]}

Shur, CC ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Dept Adv Mat Engn, Jangan Ku, Suwon 440746, South Korea

来源：

MATERIALS TRANSACTIONS | 2002年 / 43卷 / 04期

关键词：

ball shear test; reliability; fracture surface; ball grid array (BGA) joint; isothermal aging;

D O I：

10.2320/matertrans.43.751

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The present Study is aimed at the assessment on the reliability of solder ball attachment to the bond pads of BGA substrate with various plating schemes. The reliability of solder ball attachment is characterized by mechanical ball shear tests. In addition to the ball shear tests, SEM is performed to inspect the cross-section and the fracture surface of the tested specimens for failure analysis. The aging was conducted in convection ovens in air at 343, 393, 423 and 443 K respectively for times ranging 8.64 x 10(4) to 864 x 10(4) s, Without regard to the deposited layer, the shear strength of BGA joints decreased with the increasing temperature and time. After isothermal aging. the fracture surface shows various characteristics depending on aging temperature and time, and the types of BGA pad.

引用

页码：751 / 756

页数：6

共 50 条

[21] Effect of Surface Finish on Mechanical and Electrical Properties of Sn-3.5Ag Ball Grid Array (BGA) Solder Joint with Multiple Reflow
Sung, Ji-Yoon
Pyo, Sung-Eun
Koo, Ja-Myeong
Yoon, Jeong-Won
Shin, Young-Eui
Jung, Seung-Boo
JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, 2009, 47 (04): : 261 - 266
[22] Ball impact responses of Sn-1Ag-0.5Cu solder joints at different temperatures and surface finishes
Kao, Chin-Li
Chen, Tei-Chen
MICROELECTRONICS RELIABILITY, 2018, 82 : 204 - 212
[23] Effects of PCB ENIG and OSP Surface Finishes on the Electromigration Reliability and Shear Strength of Sn-3.5Ag PB-Free Solder Bump
Kim, Sung-Hyuk
Lee, Byeong-Rok
Kim, Jae-Myeong
Yoo, Sehoon
Park, Young-Bae
KOREAN JOURNAL OF MATERIALS RESEARCH, 2014, 24 (03): : 166 - 173
[24] Interfacial reactions of BGA Sn-3.5%Ag-0.5%Cu and Sn-3.5%Ag solders during high-temperature aging with Ni/Au metallization
Sharif, A
Islam, MN
Chan, YC
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2004, 113 (03): : 184 - 189
[25] An Embrittlement Mechanism of Impact Fracture of Sn-Ag-Cu Solder Joints on BGA Using Electroplated Ni/Au Surface Finishes
Yamamoto, Kenichi
Akahoshi, Haruo
Kato, Takahiko
Kawamura, Toshinori
Koizumi, Masahiro
Satoh, Ryohel
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2008, 31 (04): : 849 - 858
[26] Interfacial reactions of Sn-3.5% Ag and Sn-3.5% Ag-0.5% Cu solder with electroless Ni/Au metallization during multiple reflow cycles
Sharif, A
Chan, YC
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2005, 16 (03) : 153 - 158
[27] Effect of La addition on adhesive strength and fracture behavior of Sn-3.5Ag solder joints
Lee, Hwa-Teng
Chen, Yin-Fa
Schwedt, Alexander
Mayer, Joachim
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (10-11): : 3630 - 3638
[28] Effect of 0.5 wt% Cu in Sn-3.5%Ag solder balls on the solid state interfacial reaction with Au/Ni/Cu bond pads for ball grid array (BGA) applications
Alam, M
Chan, YC
Tu, KN
Kivilahti, JK
CHEMISTRY OF MATERIALS, 2005, 17 (09) : 2223 - +
[29] Mechanical and Electrical Properties of Cu/Sn-3.5Ag/Cu Ball Grid Array (BGA) Solder Joints after Multiple Reflows
Ja-Myeong Koo
Bui Quoc Vu
Yu-Na Kim
Jong-Bum Lee
Jong-Woong Kim
Dae-Up Kim
Jeong-Hoon Moon
Seung-Boo Jung
Journal of Electronic Materials, 2008, 37 : 118 - 124
[30] Mechanical and electrical properties of Cu/Sn-3.5Ag/Cu ball grid array (BGA) solder joints after multiple reflows
Koo, Ja-Myeong
Vu, Bui Quoc
Kim, Yu-Na
Lee, Jong-Bum
Kim, Jong-Woong
Kim, Dae-Up
Moon, Jeong-Hoon
Jung, Seung-Boo
JOURNAL OF ELECTRONIC MATERIALS, 2008, 37 (01) : 118 - 124

← 1 2 3 4 5 →