The study of cylinder liner plateau honing process

被引：86

作者：

Pawlus, P. ^{[1
]}

Cieslak, T. ^{[2
]}

Mathia, T. ^{[3
]}

机构：

[1] Rzeszow Univ Technol, Rzeszow, Poland

[2] Mahle Polska, Polska, Poland

[3] Ecole Cent Lyon, F-69130 Ecully, France

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2009年 / 209卷 / 20期

关键词：

Cylinder liner; Slide honing; Surface topography; SURFACE FINISH; PARAMETERS;

D O I：

10.1016/j.jmatprotec.2009.04.025

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A lot of slide-honed cylinder surface topographies were measured and analysed in two and three dimensions. The correlation and regression analyses of parameters included in ISO 13565-2 (Rk group) and in ISO 13565-3 (Rq group) standards as well as of their 3D extensions were carried out. The Rk group of parameters was also compared with the Rq family as regards stability. In slide honing research the effect of honing parameters on cylinder liner surface topography was studied. All selected surface topography parameters were response variables. We found from the experiment that the coarse honing pressure is important parameter of the honing process. It almost defines the final valley depth. The plateau honing time is the second substantial machining parameter. The effect of plateau honing pressure on cylinder liner profile roughness parameters is negligible. (C) 2009 Elsevier B.V. All rights reserved.

引用

页码：6078 / 6086

页数：9

共 50 条

[41] A numerical model to investigate the effect of honing angle on the hydrodynamic lubrication between a combustion engine piston ring and cylinder liner
Spencer, A.
Almqvist, A.
Larsson, R.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2011, 225 (J7) : 683 - 689
[42] Tribological performance of engine oil with graphene oxide nano additives on cylinder liner honing surface at high contact pressure
Javeed, Abdulhakeem
John, Bibin
Mana, Anil Payyappali
[J]. MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 4008 - 4011
[43] Friction and wear properties of cylinder liner and piston ring with different YAG laser honing micro-pits distributions
Zhan, Jian
Yang, Ming-Jiang
[J]. Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 2011, 29 (01): : 84 - 89
[44] DEVELOPMENT OF CYLINDER BORE WITHOUT HONING
NAGATA, T
IKENO, I
[J]. JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1983, 28 (04): : 243 - 248
[45] AN OPTIMIZATION STUDY FOR THE SURFACE QUALITY OF THE HONING PROCESS
Yurdakul, M.
Ic, Y. Tansel
Gunes, S.
[J]. 24TH INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH (ICPR), 2017, : 394 - 399
[46] Simulation of roughness and surface texture evolution at macroscopic scale during cylinder honing process
Goeldel, B.
El Mansori, M.
Dumur, D.
[J]. 14TH CIRP CONFERENCE ON MODELING OF MACHINING OPERATIONS (CIRP CMMO), 2013, 8 : 27 - 32
[47] Process modeling and simulation of plasma and HVOF sprayed cylinder liner coatings
Buchmann, M
Gadow, R
Lopez, D
Wenzelburger, M
[J]. 27TH INTERNATIONAL COCOA BEACH CONFERENCE ON ADVANCED CERAMICS AND COMPOSITES: B, 2003, 24 (04): : 309 - 316
[48] Effect of cylinder liner cast iron microstructure on friction and wear process
Zhang, Baofeng
Ma, Xuan
Lu, Xiqun
Song, Yang
Shi, Yufeng
Fu, Yudong
[J]. MATERIALS SCIENCE AND TECHNOLOGY, 2023, 39 (05) : 600 - 612
[49] Investigation of thermal behavior on cylinder liner during its boring process
Tang, YuLong
Sasahara, Hiroyuki
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (14): : 2162 - 2171
[50] Study on Whole Forming Process of Unequal Thickness Inner Liner for High-Pressure Gas Cylinder
Wang, Chen
Zhang, Binkai
Tian, Wang
Tian, Zhuangzhuang
Zhao, Chunjiang
[J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2024, 25 (07) : 1335 - 1350

← 1 2 3 4 5 →