AN OPTIMIZATION STUDY FOR THE SURFACE QUALITY OF THE HONING PROCESS

被引：0
|
作者：
Yurdakul, M. [1 ]
Ic, Y. Tansel [2 ]
Gunes, S. [3 ]
机构：
[1] Gazi Univ, Dept Mech Engn, Ankara, Turkey
[2] Baskent Univ, Dept Ind Engn, Ankara, Turkey
[3] Ansa Hydraul, Ostim Organize San 14-16, Ankara, Turkey
来源：
24TH INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH (ICPR) | 2017年
关键词：
Honing process; Hydraulic Cylinders; Machining; Surface roughness; Taguchi Method; Response Surface Methodology; TAGUCHI OPTIMIZATION; CONCRETE; PROPORTIONS; STRENGTH; PRODUCT;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, it is aimed to experimentally optimize the interior honing process, which is applied to improve surface roughness of the internal cylinder surfaces of the hydraulic cylinders in a privately owned company. The hydraulic cylinders produced in the company are used in heavy construction machineries. In the application, the optimal values of the critical honing parameters are determined by applying two different experimental design approaches namely, Taguchi and response surface methodologies separately and compared. For interior honing process, linear speed of the honing head, tangential speed of the cylinders and abrasive grain size are considered as critical parameters in the minimization of the surface roughness in the study. Experimental results are provided to illustrate the effectiveness of the application.
引用
收藏
页码：394 / 399
页数：6
相关论文
共 50 条
  • [1] Multi-responses optimization of finishing honing process for surface quality and production rate
    Trung-Thanh Nguyen
    The-Chien Vu
    Quoc-Dung Duong
    [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020, 42
  • [2] Multi-responses optimization of finishing honing process for surface quality and production rate
    Nguyen, Trung-Thanh
    Vu, The-Chien
    Duong, Quoc-Dung
    [J]. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2020, 42 (11)
  • [3] IMPROVEMENT OF THE SURFACE QUALITY IN THE HONING PROCESS USING TAGUCHI METHOD
    Yurdakul, Mustafa
    Gunes, Serkan
    Ic, Yusuf Tansel
    [J]. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2016, 31 (02): : 347 - 360
  • [4] Honing process optimization algorithms
    Kadyrov, Ramil R.
    Charikov, Pavel N.
    Pryanichnikova, Valeria V.
    [J]. INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS 2017, 2018, 327
  • [5] Gear teeth surface roughness prediction and process parameters optimization on power honing with internal teeth honing wheel
    Han J.
    Zhang G.
    [J]. Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, 2019, 25 (02): : 403 - 411
  • [6] Optimization of Planar Honing Process for Surface Finish of Machine Tool Sliding Guideways
    Chang, Kory
    Soshi, Masakazu
    [J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (07):
  • [7] Evaluation of Quality of Steering Systems Using the Honing Process and Surface Response Methodology
    Silva, Sandro Pereira
    Brandao, Lincoln Cardoso
    Pimenta Pereira, Rafael Flavio
    [J]. MODELLING OF MACHINING OPERATIONS, 2011, 223 : 821 - +
  • [8] Investigations on surface quality improvement of straight bevel gears by electrochemical honing process
    Shaikh, Javed Habib
    Jain, Neelesh Kumar
    Pathak, Sunil
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2016, 230 (07) : 1242 - 1253
  • [9] An Analysis on the Parametric Optimization of Electrochemical Honing Process
    Diyaley, Sunny
    Chakraborthy, Shankar
    [J]. JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2020, 19 (02) : 249 - 276
  • [10] Experimental study and modelling of the effect of process parameters on surface roughness during honing process
    Singh, R.V.
    Raghav, A.K.
    [J]. Journal of the Institution of Engineers (India), Part PR: Production Engineering Division, 2010, 90 (MARCH): : 3 - 7
12345