The study of cylinder liner plateau honing process

被引：86
|
作者：
Pawlus, P. [1 ]
Cieslak, T. [2 ]
Mathia, T. [3 ]
机构：
[1] Rzeszow Univ Technol, Rzeszow, Poland
[2] Mahle Polska, Polska, Poland
[3] Ecole Cent Lyon, F-69130 Ecully, France
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2009年 / 209卷 / 20期
关键词：
Cylinder liner; Slide honing; Surface topography; SURFACE FINISH; PARAMETERS;
D O I：
10.1016/j.jmatprotec.2009.04.025
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A lot of slide-honed cylinder surface topographies were measured and analysed in two and three dimensions. The correlation and regression analyses of parameters included in ISO 13565-2 (Rk group) and in ISO 13565-3 (Rq group) standards as well as of their 3D extensions were carried out. The Rk group of parameters was also compared with the Rq family as regards stability. In slide honing research the effect of honing parameters on cylinder liner surface topography was studied. All selected surface topography parameters were response variables. We found from the experiment that the coarse honing pressure is important parameter of the honing process. It almost defines the final valley depth. The plateau honing time is the second substantial machining parameter. The effect of plateau honing pressure on cylinder liner profile roughness parameters is negligible. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：6078 / 6086
页数：9
相关论文
共 50 条
  • [1] Study of Cylinder Liner Based on Ultrasonic Plateau Honing
    Cheng Quan
    Sun Jie
    Wang Jian-qing
    Zhu Xi-jing
    [J]. ADVANCED MATERIALS AND PROCESSES, PTS 1-3, 2011, 311-313 : 2200 - 2203
  • [2] THE BIFRACTAL STRATIFIED CHARACTERIZATION OF A PLATEAU HONING CYLINDER LINER SURFACE PROFILE DURING THE WEARING PROCESS
    Wei, Chunling
    Zhu, Hua
    Lang, Shihui
    [J]. FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY, 2021, 29 (05)
  • [3] 3D surface topography of cylinder liner forecasting during plateau honing process
    Reizer, R.
    Pawlus, P.
    [J]. 13TH INTERNATIONAL CONFERENCE ON METROLOGY AND PROPERTIES OF ENGINEERING SURFACES, 2011, 311
  • [4] Mechanism Research on Cylinder Liner Groove of the Ultrasonic Plateau-honing
    Cheng, Quan
    Zhu, Xijin
    Wang, Jianqing
    Lu, Zhimeng
    [J]. SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II, 2010, 135 : 107 - 110
  • [5] Multiscale study of finish-honing process in mass production of cylinder liner
    Sabri, L.
    Mezghani, S.
    El Mansori, M.
    Zahouani, H.
    [J]. WEAR, 2011, 271 (3-4) : 509 - 513
  • [6] CYLINDER LINER HONING MACHINE
    不详
    [J]. MER-MARINE ENGINEERS REVIEW, 1994, : 32 - 32
  • [7] The effect of selected parameters of the honing process on cylinder liner surface topography
    Pawlus, P.
    Dzierwa, A.
    Michalski, J.
    Reizer, R.
    Wieczorowski, M.
    Majchrowski, R.
    [J]. SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2014, 2 (02)
  • [8] Process variability in honing of cylinder liner with vitrified bonded diamond tools
    Sabri, L.
    El Mansori, M.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2009, 204 (6-7): : 1046 - 1050
  • [9] Multi-surface topography targeted plateau honing for the processing of cylinder liner surfaces of automotive engines
    Lawrence, K. Deepak
    Ramamoorthy, B.
    [J]. APPLIED SURFACE SCIENCE, 2016, 365 : 19 - 30
  • [10] Simulation and Lubrication Characteristics of Cylinder Liner Honing Surface
    Tang, Yi-Hu
    He, Lin
    Huang, Li
    Li, Li-Ting
    Meng, Xiang-Hui
    [J]. Surface Technology, 2023, 52 (08): : 173 - 181
12345