Effect of high shear rate on the mechanical properties of polyethylene, poly(ethylene terephthalate), polystyrene, and polypropylene waste blend

被引：1

作者：

Saat, Mohd Adly Rahmat ^{[1
]}

Rasid, Rozaidi ^{[1
]}

机构：

[1] Natl Univ Malaysia, Dept Appl Phys, Bangi 43600, Selangor, Malaysia

来源：

POLIMERY | 2022年 / 67卷 / 02期

关键词：

recycling; shear rate; polymer blends; mechanical properties; COMPATIBILITY;

D O I：

10.14314/polimery.2022.2.4

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

The effect of high shear rate on the mechanical properties of polyethylene (PE), poly(ethylene terephthalate) (PET), polystyrene (PS), and polypropylene (PP) waste blend was investigated. The pro-cess was carried out at a temperature of 120 degrees C using a counter-rotating twin-screw extruder. A constant screw speed of 250 rpm and a constant weight ratio of the PE/PET/PS/PP components of 1:1:1:1 were used. The preliminary research showed that the high shear rate had no effect on the impact strength. However, the significant improvement in the flexural properties was observed as compared to those obtained at a lower screw speed of 80-120 rpm.

引用

页码：72 / 75

页数：4

共 50 条

[41] Study of the influence of accelerated aging on the physical and mechanical properties of polymer composites containing rubber, polyethylene and poly(ethylene terephthalate) waste
Dębska, Bernardeta
Caetano, Marina Altoé
Brigolini Silva, Guilherme Jorge
[J]. Journal of Cleaner Production, 2024, 444
[42] Heating rate effect on char yield from cotton, poly(ethylene terephthalate) and blend fabrics
Alongi, Jenny
Camino, Giovanni
Malucelli, Giulio
[J]. CARBOHYDRATE POLYMERS, 2013, 92 (02) : 1327 - 1334
[43] Polypropylene/Poly(trimethylene terephthalate) Blend Nanocomposite: A Thermal Properties Study
Jafari, Seyed Hassan
Asadinezhad, Ahmad
Vahid, Ali Kalati
Khonakdar, Hossein Ali
Wagenknecht, Udo
Heinrich, Gert
[J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2012, 51 (07) : 682 - 688
[44] Study of the influence of accelerated aging on the physical and mechanical properties of polymer composites containing rubber, polyethylene and poly (ethylene terephthalate) waste
Debska, Bernardeta
Caetano, Marina Altoe
Silva, Guilherme Jorge Brigolini
[J]. JOURNAL OF CLEANER PRODUCTION, 2024, 444
[45] Effect of recycled poly(ethylene terephthalate) core layer on the mechanical properties of three-layer poly(ethylene terephthalate) films
Margol, Monika
Sikora, Janusz W.
[J]. JOURNAL OF PLASTIC FILM & SHEETING, 2013, 29 (04) : 313 - 326
[46] Effect of electron radiation dose on oxidation of surface layers of polyethylene, polypropylene and poly(ethylene terephthalate) films
Zenkiewicz, M
[J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2004, 18 (05) : 607 - 616
[47] MECHANICAL-PROPERTIES AND PERMEABILITY OF POLYPROPYLENE AND POLYETHYLENE TEREPHTHALATE MIXTURES
BATAILLE, P
BOISSE, S
SCHREIBER, HP
[J]. JOURNAL OF ELASTOMERS AND PLASTICS, 1986, 18 (04): : 228 - 232
[48] Blended polypropylene/polyethylene terephthalate fibres: Crystallisation behaviour of polypropylene and mechanical properties
Ujhelyiova, Anna
Bolhova, Eva
Marcincin, Anton
Tino, Radoslav
[J]. FIBRES & TEXTILES IN EASTERN EUROPE, 2007, 15 (04) : 26 - 29
[49] Optimization of mechanical performance of compatibilized polypropylene/poly(ethylene terephthalate) blends via selective dispersion of halloysite nanotubes in the blend
Lin, Tengfei
Zhu, Lixin
Chen, Tao
Guo, Baochun
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 129 (01) : 47 - 56
[50] DYNAMIC MECHANICAL-PROPERTIES OF POLYSTYRENE - POLYETHYLENE BLEND SYSTEMS
LIU, R
LI, L
MASUDA, T
[J]. KOBUNSHI RONBUNSHU, 1989, 46 (02) : 95 - 100

← 1 2 3 4 5 →